Latest body armor Tenders | Government body armor Tenders

Central Government / Public Sector

CTN :42917324

30 Dec, 2025 NA

Panipat - Haryana

Tender For corrigendum : supply of over speed protection system as per rfq item 10

corporations/Associations/Others

CTN :43290518

12 Jan, 2026 33.04 Lacs

Kanpur - Uttar Pradesh

Tender For tender for supply of renovation of old substation for utilization as maintenance office : : - providing and applying fibre reinforced elastomeric liquid water proofing , demolishing brick work , making the opening in brick masonry of wall , dismantling doors of area 3 sq meters and below window , dismantling doors of area 3 sq meters and above window , reinforced cement concrete work in chajjas etc , steel reinforcement for rcc work , centering and shuttering including strutting propping etc , shifting filling compaction of available malwa , supplying and filling in plinth with sand under floors , providing and laying in position cement concrete , providing and laying vitrified tiles in wall floor , providing and laying of 25 mm thick kota stone slab flooring , providing and fixing tiled false ceiling of specified materials , dismantling old plaster or skirting raking out joints , 12/15 mm cement plaster , removing dry or oil bound distemper , providing and applying white cement based putty , distempering with 1st quality acrylic distemper , finishing walls with acrylic smooth exterior paint , providing and fixing aluminium work as per item a and b , providing and fixing float glass panes of 5 mm thickness , providing and fixing 12 mm thick prelaminated particle board , providing and fixing aluminium american handle , providing and fixing aluminium universal hydraulic door closer , providing and fixing bright lock with 6 levers , providing and fixing aluminium tower bolts 250x10 mm , providing and fixing aluminium tower bolts 150x10 mm , providing and fixing double action hydraulic floor spring , providing and fixing sliding device for aluminium door , making plinth protection 50mm thick of cement concrete , brick work with common burnt clay modular bricks below plinth , brick work with available bricks with cleaning of old mortar on site in plinth and foundation , brick work with common burnt clay bricks above plinth , providing and laying in position cement concrete m20 , providing and fixing gi chicken wire mesh , providing and laying 60 mm thick faciory made cement concrete , wiring for light point fan point exhaust fan point call bell point , supplying and drawing following sizes of frls pvc insulated copper conductor 3x2 5 sqmm , supplying and drawing following sizes of frls pvc insulated copper conductor 3x4 sqmm , supplying and fixing gi box with fixing 6 pin 5 6 15 16 a modular socket outlet and 15 16 a , wiring for group controlled looped light point fan point exhaust fan point call bell point , supplying & fixing gi box with 25a modular socket outlet and 25a modular sp mcb c , supplying and fixing following way three pole and neutral mcb distribution board , supplying and fixing 5 a to 32 rating 240 41 5 v 10ka c curve , supplying and fixing following rating four pole 415 v isolator in the existing mcb db , earthing with g l earth plate 600 mm x 600 mm x 6 mm , supplying and laying 25 mm x 5 mm g i strip , supplying of following sizes of 1point 1 kv grade multicore aluminium conductor , supply and installation of recess led lights in false ceiling 36 watts , supply and installation of 22 watt led batten , supply and fixing of 400 450 mm sweep wall bracket fan , supply installation and commissioning of 1200 mm sweep ceiling fan

Central Government And Public Sector

CTN :43018274

30 Dec, 2025 5.64 Lacs

Chamba - Himachal Pradesh

Tender For corrigendum : supply of purchase of spare parts for fire protection system c c--hooter 220v dc, l 125mm, b 125mm , hooter 24v dc, l 125mm, b 125mm , push button 10a 415v ac , 1a 250v dc , 1noplus1nc with element switch , selector switch 16a 250v ac, 2 way on and off , heat detector, 5a 125v ac, 0. 5a 125v dc, setting at 175degreef for opus , heat detector, 5a 125v ac, 0. 5a 125v dc, setting at 190degreef for cable tunnel , 90 degree gi elbow 3 way, 1by2inch bsp, type-heavy duty , 1by2inch ball valve ss, heavy duty, suitable for pressure upto 10kgby cm square , 1by2inch x 1by2inch bsp male female connector, gi material, typeheavy duty , 1by2inch bsp gi tee, type-heavy duty , 1by2inch bsp gi socket, type-heavy duty , 1by4inch bsp thread brass flare male , 3by8inch copper tube , 3by8inch brass nut for copper tube, suitable for item no. 13 , 3by16inch brass screw for deluge valve, length 12mm 100 per packet , 16mm dia. stud, length 200mm with 2 nuts , butterfly valve 4 inch with suitable ms flange , water pressure gauge with mounting for deluge valve 10kgbycm square pressure , water motor gong, suitable for pressure upto 5 kgbycm square, with 1by2inch to 3by 4inch male - male thread adaptor hex nipple of ss , glass for hydrant panel, w 570mm, h 650mm, 5mm thick , glass for hydrant panel, w 240mm, h 420mm, 5mm thick , glass cutter suitable for cutting 5mm thick glass , gasketby rubber beading for glass of hydrant panel, one inch thick , pin type panel key for hydrant panel , qbd bulbs for detection line, bursting temp plus79 degree celcius plus175degreef, dia 1by2 inch , emergency push button, 10a, dia 22mm , toggle switch, 2 way, 2 pole, 10a , 220v dc brass solenoid valve of 1by2 inch dia, suitable for airbywater of 10kgbycm square pressure, normally closed type , hose pipe with nozzle 38mmx 30 mtr for fire protection system ) /bid number: gem/2025/b/6935559 * /dated: 02-12-2025 & & / bid document1 / 23

State Government

CTN :41901256

02 Jan, 2026 4.89 Crore

Multi City - Telangana

Tender For corrigendum : supply of item-i: 220kv feeder control and relay panels, item-ii: 220kv transformer control and relay panels, item-iii: 220kv bus-bar protection panel for 12 bays with double bus(centralized), item-iv:220kv bus-bar protection panel for 12 bays with double bus(distributed) and item-v:220kv bus-coupler protection panels

corporations/Associations/Others

CTN :43240843

31 Dec, 2025 NA

Bhavnagar - Gujarat

Tender For annual rates for work of supply of solid waste management department tools, pesticide and sweeping equipments/cleaning equipments, dustbins, litterbins etc dhamelu (tagarun) , khampari , khampali (with wooden handle): , khampali (without wooden handle): item , wooden handle of a hoe , shovel (with wooden handle) , shovel (without wooden handle) , wooden handle of shovel , trikam (with wooden handle) , trikam (without wooden handle): , standing broom , goa broom (horizontal broom): , 50 gm soap , 75 gm soap , 100 gm soap , 125 gm soap , liquid handwash quantity-200 ml(bottle) net , net 500 ml( bottle liquid handwash quantity /pouch) , liquid handwash quantity 675 ml( /pouch) net bottle , liquid handwash net quantity 725 ml( bottle /pouch) , powder to liquid handwash: , item spec. no.17 as per, product type hand wash, germ protection/germ defence before 24 best months from manufacture. per no. net sanity should be packed as shown. work with supply at indicated locations. , powder to liquid handwash net quantity-8-9 gm , powder to liquid handwash , net quantity-45 gm , hand gloves: , surgical face mask class 2 , "round waste bins with flap lids of different capacity" , rectangular waste bin with closed lid of different capacity , foot operated waste bin of different capacity , rectangular waste bin with side window of different capacity , two wheeled waste bin with lid of different capacity , decorative bins (for exa. rabit type, monkey type or equivalent) of different capacity

CTN :43205945

06 Jan, 2026 NA

Chittorgarh - Rajasthan

Tender For tender for supply of make- ird mechanalysis limited , ird544m - vibration sensor , inductive velocity , top exit , mil 2-pin connector , 42.52mv/mm/s , 10 hz - 1 khz sku - m97120 , make- ird mechanalysis limited , stud for vibration sensor item no 1 , mounting/grub screws , 1/4 inch-28unf male , m6 x 1 male sku - stud-m6 provides connection between vibration sensor and mounting pad , m/s ird mechanalysis limited , vibration sensor mounting pad mild steel blackodized for ird544m (60x60x16 mm) with m6 thread for item no 1 tapped sku - ms-pad-ird544m , make- m/s ird mechanalysis limited , vibration sensor cable assembly for item no 1 , signal cable teflon 3.5mm dia , ss conduit 5mm id , 15 meter length straight , 2 pin ms , shielded , spade lugs at free end sku - m601015spade lugs at free end carry following colour code- red core- signal live , black core- signal ground , green core- signal shield , make- ird mechanalysis limited , eddy current pickup set comprising of probe , driver and connecting cable for 9 meter system. constituents. , make- m/s ird mechanalysis limited ird8800 rack , 8 position , 5u sku - m88008 this is the bin and will accomodate ird8800 cards , make- ird mechanalysis limited ird8800 (8800) , m88250 (88250) casing vibration module , 2ch velometer input (mv /mm/sec) and 1ch key phasor input , api standard 670 compliant sku - m88250-dc ird8800 series module m88250 can work with all types of velocity output vibration sensors that provide mv/mm/sec output - like ird531 (4 mv/mm/sec) and ird544m (42.52 mv/mm /sec) , make- m/s ird mechanalysis limited , ird8800 (8800) , m88900 (88900) - speed module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 v dc , sku - m88900-dc , input- accelerometer and/or velometer , outputs-4-20 ma dc output proportional to full scale vibration rs-485 modbus rtu/tcp-ip output buffered output alarm relay contacts trip relay contacts full scale , alarm , trip , units , sensitivity and other parameters are programmable and password protected , make- ird mechanalysis limited , ird8800 (8800) , m88600 (88600) - eccentricity module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 v dc , sku - m88600-dc input- accelerometer and/or velometer , outputs-4-20 ma dc output proportional to full scale vibration rs-485 modbus rtu/tcpip output buffered output alarm relay contacts trip relay contacts full scale , alarm , trip , units , sensitivity and other parameters are programmable and password protected , make- ird mechanalysis limited , 35 mm din rail mount industrial grade power supply , 480 w , product- rps480 , 24 v dc output , dimension- 60 x 154 x 158.55 mm (w x h x d) , weight- 1050 gms , sku - rps480-24-ce supports 90 - 264 vac / 127 - 370 vdc power factor more than 0.95 full load over entire input range protection against short circuit , overload , overvoltage & over temperature cooling by free air convection ul 508 approved (e522848) efficiencies up to 93 % dc ok relay contact , make- ird mechanalysis limited , cabinet 1500 x 600 x 600 in mm , ip32 sku - cabinet-1500-600-600-ip32 , installation commissioning and calibration check of all supply sensor with unit at site

Central Government And Public Sector

CTN :43172583

03 Jan, 2026 NA

Surat - Gujarat

Tender For supply of supply of keltron make part number as per item no. 1 , supply of keltron make smps card smps2 aw 205 840 332 220v,520a dcps , supply of keltron make part no. kab 2553 class h 0. 23mh 167a 50 hz 40kva inv output harmonic filter series choke , supply of keltron make part no. kab 2554 6kva py,123v,48. 78a,sy. 240v 42a class h main output step up transformer used in 5kva inv , supply of keltron make pcb303 trip sense and pull up pcb aw 205 840 373 2x500kva ups , supply of keltron make part no. smps1 bgf pe 0441 0098 for 2x500kva ups , supply of keltron make pcb part no. aw 250 840 332 smps2-smps5 2x500kva ups , supply of keltron make fpga fail pcb part no aw 205 840 377 used in 2x500kva ups , supply of keltron make part no. ct 921 ct 923 1000 5a 10 kva ci 1 2x500kva ups , supply of keltron make transformer t104 part no. kab 078 used in 150kw tcps , supply of keltron make pcb part no. aw 205 840 274 3 controller used in 150kw tcps , supply of keltron make regulator pcb feeding to pcb106 protection setting pcb used in 24v,195v dcps , supply of keltron make bypass enable pcb part no. aw 205 840 368 used in 40kva inv , supply of keltron make regulator used in 220v 520a dcps. pcb feeding to 106 protection setting pcb. , supply of keltron make smps 24v to 220v, part no. aw 205 800 259 for 24v dcps , supply of keltron make power supply card 0901 pcb used in 24v charger, acvr etc , supply of keltron make power supply card 0901 pcb used in power ups etc

Central Government/Public Sector

CTN :43196996

05 Jan, 2026 NA

Harnaut - Bihar

Tender For aluminium flat moulding, size : 30 mm x 2 mm x 3660 mm to sk. no. llh-25/80, item no.-8, alt.no.12, to be dull anodized to is:1868-96 (reaffirmed 2021), tab-1, gr. ac 25, material specn.-aluminium is-733 -83 (reaffirmed 2022) with amendment no. 1 & 2, condition 63400 w.p., each strip is to be covered with pvc protection tape during supply [weight of each metres is 0.162 kgs. approx.].

CTN :43195179

12 Jan, 2026 NA

Halisahar - West Bengal

Tender For procurement of aluminium angle moulding, size : 25 mm x 25 mm x 1.5 mm x 3660 mm to sk. no. llh-25/80, item no. 17, alt no. 12, to be dull anodized to is:1868-96 (reaffirmed 2021), tab-1, gr. ac 25, material spec. aluminium is-733-83 (reaffirmed 2022) with amendment no. 1 & 2, condition 63400 w.p., each strip is to be covered with pvc protection tape during supply [weight of each metres is 0.197 kgs. approx.].

CTN :42955686

29 Dec, 2025 NA

Bokaro - Jharkhand

Tender For supply of item for procurement : led lights - specification of led lights :-input voltage : 250v ac, ( 5%) operating volt. range -100v 285v ac., input frequency :- 50 hz ( 3%hz), usage hours 24x7x365 per year, power factor :- > 0.9, no. of leds - as per design by party. colour temperature ( k) - 5500-6500 or white or warm white, luminous efficacy in lumens per watt : - > 100 or more, led operational life :- > 50000 burning hrs., lumen maintenance - 70% over 50,000 hrs., working humidity :- 10% to 90% rh, working temperature :- 5 to 50 c, ingress protection - ip65, colour rendering index (cri): - > 80, driver type - constant current type, total energy consumption of the system :- 1.15 times rated wattage, applicable standards/mandatory requirement - the fixture should conform to applicable ies/iesna lm79-80/iec equivalent indian standard : is 16106-2011) note : 1. wattage, model and make of the fixture should be same as accepted techno - commercially. 2. lm-79-80 certificate copy along with the supply., cat. no. 00006359400 40w, led light complete with well glass fittings sets including luminaries., cat. no. 00006359700120w, led flood light fittings including luminaries

Body Armor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

corporations/Associations/Others

Central Government And Public Sector

State Government

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector