Latest bogie frame Tenders | Government bogie frame Tenders

Central Government/Public Sector

CTN :45083161

12 May, 2026 NA

Harnaut - Bihar

Tender For auction sale of depot ferrous scrap - mixed ferrous melting scrap amaigamating the varous typed consisting of fresh plate, sheets plate cuting and shearing of all shaped and size. structural sectons, scrap low phosphorous steel, iron pipes, bar fittings, buffer cases and plungers (other than cast steel) sleeves and spindles with head, screw couplings, ties bar all types of eqaulilising beams & centralize beams, fish plate other than cast steel wire & wire rop all types of chains all types of sleeper all types of bars and rods junk kutchra, steel fabriction nut bolt, grease seal etc. [our offer:- miscellaneous ferrous scrap (equalizing stay long pin, short pin, equalizing stay bracket, lh & rh bracket, spring guide, anchor link bracket on bogie frame, dust shield spring, flange for fixing shock absorber, equalizing stay, anchor link, bss hanger, bss hanger pin, brake head, block hanger for bogie brake, levers, brake head adjuster, brake head spring, parts of shock absorber, compensating ring etc.]).i lot no ea982604005 location- scrap yard

Central Government / Public Sector

CTN :45084412

21 May, 2026 NA

Gooty - Andhra Pradesh

Tender For auction sale of others - bogie frames - 01 nos. sale on number basis, -delivery on lot basis only. lot no. 5364 26 04 05 gtl gy bf ap. available with sse dsl gy. scrap condemned unserviceable overaged cast steel one numbers of co-co alco loco bogie frames with attachment consisting of :- (rc items are :-without wheel sets each wheel set having axle box-2 no, axle- 1no, bull gear- 1no, wheel discs 2 nos. are to be returned to railway by the purchaser). bogie frame with all other attached accessories (spring, eq beam, hanger, stay plate, brake shoe, slack adjuster, saddle, tie-bar ) are offered for sale to the firm. cast steel weight in each bogie frame - 5420 kgs / 05.420 mts (approx) total quantity - 01 no total cast steel weight - 1 x 5420 ¿ 5420 kgs / 5.420 mts ( approx).1) b.no.vs76. available near bay no. 10 gtl end diesel loco shed gooty. ds-8 no.536480005, dated 13.04.26. hsn code: 720429 - gst 18%. note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.

Central Government / Public Sector

CTN :45084413

21 May, 2026 NA

Gooty - Andhra Pradesh

Tender For auction sale of others - bogie frames - 02 nos. sale on number basis, -delivery on lot basis only. lot no. 5364 26 04 04 gtl gy bf ap. available with sse dsl gy. scrap condemned unserviceable overaged cast steel two numbers of co-co alco loco bogie frames without attachments cast steel weight in each bogie frame - 4500 kgs / 04.500 mts (approx) total quantity - 02 nos total cast steel weight - 2 x 4500 = 9000 kgs / 9.000 mts ( approx).1) b no. 44, 2) b.no.10. available near bay no. 6&7 diesel loco shed gooty.. ds-8 no.536480004, dated 13.04.26. hsn code: 720429 - gst 18%. note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side. 4) gas/chisel cutting is permitted, if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc. witnessing officials to ensure that the lot is delivered as per lot description 5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading 8) request for fixation of delivery point should be invariably raised in ireps online only. purchasers are requested to make use of this facility. no representative should be sent to the office of sr.dmm/gtl for collection of delivery fixation letter. as soon as the balance sale value is received by railways online, delivery order will be issued immediately, to facilitate the purchaser to raise an online request for fixation of delivery point. 9) railways does not guarantee for quality, quantity description etc.

Central Government And Public Sector

CTN :45076471

26 May, 2026 NA

Raipur - Chhattisgarh

Tender For overhauling of fabricated co-co bogie frames of wag-7 locomotives of diesel loco shed raipur.

Central Government/Public Sector

CTN :44842214

14 May, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of bogie frame to drg. no. (a) icf/mrvc/d-0-3-001, alt "n", col-ii (or) (b) icf/mrvc/d/bt-0-3-001, alt "c", col -ii along with damper fixing bracket to drg. no. (339)ac/dcemu/d6-0-1-602,col.i - 4 nos andbolt complete to drg. no. emu/m/3ph-0-2-002, alt "c", col.i - 16 sets bogie frame to be supplied without nylon bushes where ever applicable and shall confirm to rdso/specn.c-9202, rev-2 or latest. the firm shall fulfil the requiremnt as per icf/md/specn/147, issue status 01, rev-02 with amendment no- 02. special condition : - suppliers commitment will be there to supply as per drawing -(a) ( for dash pot arrangement ) or as per new drawing - (b) ( for adoption of conical spring ). - one month notice willbe given to vendor whether he has to supply as per drawing - (a) or drawing - (b). -rate quoted will be applicable to both drawing - (a) and drawing - (b) . i) paint scheme shall be as per drawing. ii) qap to format icf/ims/md/f-31 shall be prepared along with relevant documents and kept ready for developmental/educational order. iii)firm should supply bogie frame along with the dimensional report, stress relieving report and radiography films. iv) firm should have induction/electric furnace for stress relieving of bogie frame. v) prototype inspection is applicable only for first time of developmental/educational order. vi) stage inspection to be done as below. (a) raw material stage 1. ensure the raw material used using portable spectrometer machining stage 1. dimensional checks 2. edge preparations (b)welding stage 1. weld parameter to be checked and recorded. (c) surface preparation and painting stage. 1. short/sand blast to the requirements. 2. painting process as per the specification. 3. final product inspection. [ warrantyperiod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45078636

14 May, 2026 NA

Chennai - Tamil Nadu

Tender For bogie frame to drg. no. (a) icf/mrvc/d-0-3-001, alt "n", col-ii (or) (b) icf/mrvc/d/bt-0-3-001, alt "c", col -ii along with damper fixing bracket to drg. no. (339)ac/dcemu/d6-0-1-602,col.i - 4 nos andbolt complete to drg. no. emu/m/3ph-0-2-002, alt "c", col.i - 16 sets bogie frame to be supplied without nylon bushes where ever applicable and shall confirm to rdso/specn.c-9202, rev-2 or latest. the firm shall fulfil the requiremnt as per icf/md/specn/147, issue status 01, rev-02 with amendment no- 02. special condition : - suppliers commitment will be there to supply as per drawing -(a) ( for dash pot arrangement ) or as per new drawing - (b) ( for adoption of conical spring ). - one month notice willbe given to vendor whether he has to supply as per drawing - (a) or drawing - (b). -rate quoted will be applicable to both drawing - (a) and drawing - (b) . i) paint scheme shall be as per drawing. ii) qap to format icf/ims/md/f-31 shall be prepared along with relevant documents and kept ready for developmental/educational order. iii)firm should supply bogie frame along with the dimensional report, stress relieving report and radiography films. iv) firm should have induction/electric furnace for stress relieving of bogie frame. v) prototype inspection is applicable only for first time of developmental/educational order. vi) stage inspection to be done as below. (a) raw material stage 1. ensure the raw material used using portable spectrometer machining stage 1. dimensional checks 2. edge preparations (b)welding stage 1. weld parameter to be checked and recorded. (c) surface preparation and painting stage. 1. short/sand blast to the requirements. 2. painting process as per the specification. 3. final product inspection. [ warrantyperiod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45057124

21 May, 2026 NA

Hubli - Karnataka

Tender For supply of set of hex head screw m10 x 70-8.8 for rubber stopper arrangement on bogie frame for crown clearance to drg. no. t-0-1-645, alt-c item no.3 to 7 in assembled condition. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45057007

14 May, 2026 NA

Amritsar - Punjab

Tender For supply of brake hanger bracket on head stock with nylon bushes for 16.25t non-ac bogie frameto drg. no. icf/std-0-3-001/ col.-1, item no. 1 & 5, alt. b. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45057008

14 May, 2026 NA

Amritsar - Punjab

Tender For supply of brake hanger bracket on transom with nylon bushes for 16.25t non-ac bogie frame. drg. no. icf/std-0-3-001/ col.-2, item no.2 & 5, alt. b. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45057002

14 May, 2026 NA

Amritsar - Punjab

Tender For supply of various items for 16.25t non-ac bogie frame, description and specification as per annexure-a. [ warranty period: 30 months after the date of delivery ]

Bogie Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors