Get complete information related to latest Bolster Liner Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bolster Liner Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bolster Liner Tenders.
Tender For corrigendum : repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and
Tender For supply of ms rato make smps module pcb model no- r120610dsr1 and model no- n2005 , ms rato make signal conditioning module sc-810 , rail mounted input-4 to 20ma dc, output- 4 to 20ma dc, power supply-24vdc. , ms rato make signal conditioning module sc-955 rail mounted input--5 to 5 vdc , output-4 to 20ma dc, power supply-24vdc , ms rato make signal conditioning module sc-861 rail mounted input--0 to 20 ma dc, output-0 to 20ma dc, power supply- 24vdc. , ms rato make din rail mountable power supplies 24v dc0.5a
Tender For carriage of light melting scrap(lms) consisting of wagon body (in dismantled/cut conditions), wagon cbc components without rubber (for example couplers and draft gears without pads), wagon bogies (in dismantled condition), wagon end buffers, yoke, knuckles, springs (including springs used in casnub bogies), ms angles, tie bars, erc (elastic rail clips), ms panel sheet & wagon door, ms sheet, scrap ms melting, ms adopter wide jaw and narrow jaw, ms cub spacer, ms shearing plate, bogie frame bolster, ms plate, ms ingot and others; from various railway units in india to rail wheel factory, yelahanka, bengaluru - 560064; under the distance slab of above 1000kms (with a mean distance of 2500kms), by road.quantity:4000mt. note: the work involves other intermediary and ancillary activities such as: (1)collection of lms (2) loading the lms into the vehicle. the contractor shall load only those lms items which are free from rubber components (3)unloading at destination, by railways at free of cost.special note: mandatory documents should be submitted in compliance of bid security, annexure-v, annexure-v(a), annexure-vi(b), power of attorney and iba certification. non-submission of necessary documents in support of the above shall result in summarily rejection of bids.
Tender For supply of ceiling rose 3 pin 5 amp isi marked , s p 5 or 6 amp one way modular switch , s p 5 or 6 amp two way modular switch , s p 15 or 16 amp one way modular switch , 3 pin 5 or 6 amp modular socket outlet , 6 pin 15 or 16 amp modular socket outlet , mcb 10 amp single pole , mcb 16 amp single pole , mcb 32 amp double pole , mcb db box 16 way , insulated copper earthing wire 1 sqmm green colour 90 mtr roll , batten holder , wall mixer three in one , cp shower hose pipe 1 pt 5 mtr long , cp over head shower with arm , cp hand shower with flexible arm , sintex tank 1000 ltr capacity double ply , cp extension nipple 1 pt 5 inch long , cp flange , cp waist jali 75 mm dia , cp waist jali 100 mm dia , cpvc solvent 118 ml pack , padestel wash basin pot including all fittings complete , indian type w c long make , looking mirror 450 x 600 mm and 6 mm thick without frame , ptmt glass self , peg rail ss , round mirror holder bracket pack of four 8 mm , pvc cowl 4 inch dia , pvc long bend , paint white matt emulsion for ceiling , interior acrylic emulsion paint , stainer 200 ml pack cream colour , wall primer white , red oxide primer , paint enamel golden brown , painting brush 1 inch , painting brush 4 inch , painting roller , wood primer , putty applicater , white cement , 6 mm thick plywood 8 feet x 4 feet , 12 mm thick plywood 8 feet x 4 feet , fevicol hitex , touch wood varnish , wire mesh 4 feet width 15 m long , ss hinges 75 mm long , screw 3 by 4 inch ss , screw 1 inch ss , screw 1 pt 5 inch ss , screw 3 inch ss , ppgi sheet green 3 pt 5 m x 1 pt 8 m , ppgi ridge , non skid floor tiles 600 x 600mm or 300 x 300 mm , wall tile 600 x 300 mm , wooden scanteling 5 inch x 4 inch x 12 feet teak wood , wooden scanteling 4 inch x 3 inch x 12 feet teak wood , wooden planks 10 inch x 1 pt 5 feet x 12 feet teak wood , exhaust fan 230 mm dia , ceiling fan 1200 mm , water gyeser 20 ltr cap , tile cutter blade 4 inch bosch , tile cutter machine , ms square pipe 40 mm x 40 mm x 4 mm , cgi sheet cutter scissor , glass cutter
Tender For supply material for kitchen shed at hirisave village hirisave gp - broken stone aggregate 40 mm size sh01, broken stone aggregate 20 mm size sh02, broken stone aggregate 12 mm to 10 mm size sh 04, coarse sand (zone iii) sh05, portland cement sh06, plasticizer / super plasticizer sh20, tmt bars fe 500 sh23, binding wire sh24, size stone 20 x 20 x 25 cms sh11, bond stone 20 x 20 x 45 cm sh12, boulders sh13, solid concrete block 401520 cms 5.00 n/sqmm sh25, honnewood planks for panels 20 mm thick morb15, m.srods morb15, mathi/nandi wood planks for panels 25 mm thick morb 13, honnewood morb14, msflat 17, enamel metal paint morb 18, aluminium window frame section 1.20 mm thick morb 18, nylon rollers morb20, rubber beading for shutters beading morb21, pvc edge beading morb22, water proofing cement paint morb 45, whitening morb 46, dry distemper morb47, lime morb48, alluminium tower bolt -20 cm morb49, alluminium handles -15 mm morb50, cleatangles morb 51, chrominum plated screws morb 52, glass 5.5mm thick plane morb 53, enamel paint morb23, vitrified tiles 600x600 mm morb24, ceramictiles 30x 30 cms morb25, cudddapah slab 4 cm thick/shahabad/thandu morb26, glazed tiles 300x450 morb26, border tiles 30 x 10 cms morb 28, ms pipes of 80 mm to 100 mm dia morb29, rms gussetplate morb 30, corbon electrodes morb31, unit cost as per the specification morb 32, polyenthylene water storage tank of specified capacity l morb 33, polythylene pipes high density 25mm external dia morb 34, pvc pipe of 4kgcum75 mm morb35, bib cock 20mm nominal bore morb36, white vitreous china clay flat back wash basin size 630x450mm morb37, copper plated brass piller tap 15mm morb 38, cp brass chain with plug morb 39, cp brass waste 32 mm of standard pattern morb40, brass stop cock morb 41, c.i. / m.s. brackets for flushing cistern morb42, lead or pvc connection pipe 32mm dia (for wash basin)morb43, cobble stones of 60 mm thick sh46, electrification 123, white cement eeee, c.p brass towel rail 740mm length 20mm dia, name board 003
Tender For supply of material and machinaries for the construction of a kitchen at the kannada higher primary school in ramathirtha village - pvc pipe of 4kgcum75 mm morb35, ceramictiles 30x 30 cms morb25, providing and installing of pre painted galvalume iron trapezoidal profiled sheet, providing and fixing in position brass bib cock of approved quality 20mm nominal bore, providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm, fabricating, supplying and erecting m.s. tubulartruss, providing and fixing in position black cuddapah slab / shahabad slab / thandur blue slab 4 cms thick, providing and fixing glazed vitrified tiles of approved make, quality and colour of size 600x600x10mm thick, providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings, providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications, providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton, atn9 hom of vibrator 0.71 days, atn8 plasticizer / super plasticizer, atn7 mixer (concrete) - 1 cum capacity, atn6 portland cement, atn5 broken stone aggregate 12 mm to 10 mm size, atn4 broken stone aggregate 20 mm size, atn3 broken stone aggregate 40 mm size, atn22 burnt bricks class 35 (non modular), atn2 coarse sand (zone iii), atn15 mixer (concrete small used in culvert), atn14 bond stone 20 x 20 x 45 cm, atn13 rubble stones, atn11 binding wire, atn10 tmt bars fe 500, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn30 providing and fixing in position fully panelled matti / nandi wood shutters for doors, stylesand rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as perdrawing and panels of 20mm thick including cost of materials, labour, hom of machineries complete asper specifications. ( excluding cost of fixtures ), atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, hom of equipments and testingcomplete as per specifications.(for 1000 litre capacity) as per is 12701 1996. specification no.kbs13.22, atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn29 providing matti / nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, hom of machineriescomplete as per specifications., atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn25 providing and removing centering, shuttering, strutting, propping etc., for beams
Tender For supply of material and machinaries the construction of a kitchen at the kannada higher primary school in bannur village of athani taluka - pvc pipe of 4kgcum75 mm morb35, ceramictiles 30x 30 cms morb25, providing and installing of pre painted galvalume iron trapezoidal profiled sheet, providing and fixing in position brass bib cock of approved quality 20mm nominal bore, providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm, fabricating, supplying and erecting m.s. tubulartruss, providing and fixing in position black cuddapah slab / shahabad slab / thandur blue slab 4 cms thick, providing and fixing glazed vitrified tiles of approved make, quality and colour of size 600x600x10mm thick, providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings, providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications, providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton, atn9 hom of vibrator 0.71 days, atn8 plasticizer / super plasticizer, atn7 mixer (concrete) - 1 cum capacity, atn6 portland cement, atn5 broken stone aggregate 12 mm to 10 mm size, atn4 broken stone aggregate 20 mm size, atn3 broken stone aggregate 40 mm size, atn22 burnt bricks class 35 (non modular), atn2 coarse sand (zone iii), atn15 mixer (concrete small used in culvert), atn14 bond stone 20 x 20 x 45 cm, atn13 rubble stones, atn11 binding wire, atn10 tmt bars fe 500, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn30 providing and fixing in position fully panelled matti / nandi wood shutters for doors, stylesand rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as perdrawing and panels of 20mm thick including cost of materials, labour, hom of machineries complete asper specifications. ( excluding cost of fixtures ), atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, hom of equipments and testingcomplete as per specifications.(for 1000 litre capacity) as per is 12701 1996. specification no.kbs13.22, atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn29 providing matti / nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, hom of machineriescomplete as per specifications., atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn25 providing and removing centering, shuttering, strutting, propping etc., for beams
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; overhauling repairing servicingrefitting trail of clarifier unit including repair re alignment of rail track with ms base plate supportsupply installation..
Tender For supply of 5 pin 230 v flush type , pvc casing caping 25 mm width , pvc board 4 inch by 4 inch , call bell ding dong type , change over switch 250 a 4 pole , pvc board 10 inch by 12 inch , pvc board 10 inch by 8 inch , female thread socket ppr 40 mm dia , pvc three layer water storage tank 1000 ltrs with cover , pvc pipe 110 mm bore , pvc three layer water storage tank 500 ltrs with cover , ppr pipe 20 mm outer diameter , wall mixture cp 3 way 15 mm , pvc low level flushing cistern 10 ltr capacity , health faucet cp with tube 1 point 5 mtr long , bib cock cp 15 mm , ppr pipe 25 mm outer diameter , angle valve cp 15 mm , centre hole basin mixture cp 15 mm , sink mixture cp 15 mm , western toilet european pattern p trap or s trap , kitchen sink with out drain board , pvc angle stop valve 15 mm , pvc bib cock 15 mm , stainless steel curtain rails 4mtr each , tap angle valve 15mm brass fancy , tap cp bib 15mm brass fancy , wc orissa pattern viterous china 450 by 350 mm , hand wash basin viterous china glazed , looking mirror 5 mm with frame 600 mm by 450 mm , bib cock brass 15 mm , ppr union 15mm , plywood bwr 8 ft by 4 ft by 4 mm , pvc bib cock 15 mm with wall flange , ppr union 20 mm , looking mirror cabinet type 450 by 300 mm , ppr elbow 15 mm , lever type flushing cisten single flush system 10 ltr , glass shelf 6 mm thick with cp railing of size 450 by 200 mm , kitchen rack stainless steel 36 inch by 24 inch , ppr tank socket 15mm , hydraulic door closer , plywood bwr 8 ft by 4 ft by 6 mm , pvc connection pipe 15 by 600 mm , ewc seat cover white colour with nuts and bolts , pvc bend 110 mm bore , u clamp 20mm dia , door stopper aluminium , plywood bwr 8 ft by 4 ft by 8 mm , tee equal gi 15 mm , towel rail cp 600 mm long , aluminium sliding bolt 250 mm long , pvc health faucet with tube 1 point 5 mtr long , cp waste coupling 32 mm , nipple gi 15 by 100 mm , ppr elbow 20 mm , pvc connector 110 mm bore , aluminium anodised handle 100 mm , ms butt hinges 100 mm , powder coating bib tap , m seal 100 gms , ppr tank socket 20 mm , helical door spring , ppr pipe 25 mm dia 3 layer with socket , bib cock 15 mm cp long body , ppr socket 15mm , pvc waste pipe flexible type 32 mm and 600 mm long , pvc bend for cistern , gi bend 15 mm , angle valve cp , white cement , ppr union socket 25mm , pvc towel rail 600 mm , pvc shelf 450 by 200 mm , ppr 25mm tank socket , pvc soap dish , ppr pipe clamp 20 mm dia , nails 3 inch 75mm long , pvc pillar tap 15 mm , nails 1 inch 25mm long , pvc bend 75 mm , nails 2 inch 50mm long , aluminium barrel tower bolt 100 mm , pvc tee 110 mm , tee gi red 20 by 20 by 15mm , shower cp 100 mm with rod , lime unslaked , screw full trap 1 inch long pkt of 100 , screw full trap 1 by 2 inch long pkt of 100 , tank socket gi 20 mm , ppr socket 25 mm , glazing putty oil glazed , door or wall hook rail set peg set 6 pin , dooror or wall hook rail set peg set 3 pin , 2 way bib cock cp , 2 way angle cock cp , synthetic enamel paint black colour , paint brush 25mm , teflon tape 19mm 10mtr , towel ring cp , toilet paper holder cp , connection pipe wired 600mm , bib cock aassembly cp , basin mixer assembly cp , ppr gate valve 20 mm , ppr gate valve 25 mm , flushing handle suitable for 10 ltrs cistern , ppr union 25 mm , ppr u clamp 20 mm dia , ppr socket 20 mm , pvc water storage tank 200 ltrs with cover , pvc water storage tank 300 ltrs with cover , jet spray cp 15 mm , foam cushion 530 by 530 mm with tapestry cloth 32 mm density , foam sheet 6 ft by 3 ft by 75 mm , paint synthetic enamelled olive green , paint synthetic bid details/ 2 / 148 enamelled white , varnish , touch wood , cloth malmal 600 mm width , fevicol , elbow 3 way gi 32 mm , paint brush 50 mm , nails wire round 25 mm , paint brush 100 mm , nails wire round 50 mm , french polish , nails wire round 40 mm , primer , wooden screw 35 mm pkt of 100 , teak wood beading 3 by 4 inch by 1 by 2 inch round 2 mtrs long , wooden screw 45 mm pkt of 100 , wooden screw 50 mm pkt