Tender For supply of knuckle pivot pin with washer for bg wagonto rdso drg-sk-62724 item-4 alt-31 mat spec rdso spec wd-70-bd-10 rev-4 or latest to krpl38987087 [ warranty period: 30months after the date of delivery ]
Tender For pivot pin assembly for jib crane-2 at spc bay to rwf drg no. rwf/misc/m-1313. note: 1) one set consists of item no.1 to 7. 2) mtc for item no.1 , 2 , 3 & 6 to be furnished along with the supply. 3)hardness certificate for item no.1 to be furnished along with the supply. 4) make of the items at 4&5 (bearing) shall be of skf/ntn/timken/fag only 5) the bearings shall be procured only from oem or its authorised dealeres and the supplier should furnish the documents authenticating the purchase of bearing only from oem/authorised dealer alongwith the supply. [ warranty period: 12 months after the date of delivery ]
Tender For auction sale of rolling stock - total qty: 03 nos (approx weight for sale quantity: ferrous: 71 mt approx) u/s. condemned bg overaged and heavily corroded coaches to be sold leaving excluded fittings as per crse/chg/bsp letter no. mech/hq/010/010/warranty dated 23.09.2021, description of excluded fittings. 1)icf bogies with complete fittings and wheel sets, axle box and bearing and side bearer bronze piece. 2) distributor valve 3) brake cylinder body mounted and bogie mounted. 4) wheel sets coaches. 5) centre pivot pin of icf coaches. coach no. sec 908602 rccn, sec 908205 rcc and sec 888713 tr/tv remarks:- (a) bidders are advised to inspect lots before participation in auction. disposal weight as approximate, it is for reference only (b) the lot to be sold on ""as is where is basis"" (c) precaution should be taken by the purchaser for fire or any casualty on his own risk and cost & any loss/damage that may arise (if any) due to theft, accident, flood etc shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances.
Tender For auction sale of rolling stock - total qty: 01 no (approx weight for sale quantity: ferrous: 39.00 mt approx. u/s. condemned bg overaged and heavily corroded coach to be sold leaving excluded fittings as per crse/chg/bsp letter no. mech/hq/010/010/warranty dated 23.09.2021, description of excluded fittings. 1)icf bogies with complete fittings and wheel sets, axle box and bearing and side bearer bronze piece. 2) distributor valve 3) brake cylinder body mounted and bogie mounted. 4) wheel sets coaches. 5) centre pivot pin of icf coaches. coach no. sec 01026 wgfcwac remarks:- (a) bidders are advised to inspect lots before participation in auction. disposal weight as approximate, it is for reference only (b) the lot to be sold on ""as is where is basis"" (c) precaution should be taken by the purchaser for fire or any casualty on his own risk and cost & any loss/damage that may arise (if any) due to theft, accident, flood etc shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances.
Tender For auction sale of others - scrap of cs and ms containing release unserviceable material of c&w qty 95.00 mt such as such hex head bolt & castel nut, door sealing bracket, door chainless cotter short, swing door bolt eye, man hole cover, vapour extractor cock, filling pipe cap, valve spindle gland, gland for 100 mm lubricated t.p. valve, locking plate, bolster inner spring, wear plate brake beam, brake beam, side frame key for ctrb, bolsterspring snubber, key bolt with spring washer, side frame friction liner, top side bearer liner, height adjustment packing 37 mm, height adjustment packing 12 mm, empty tie rod, loaded tie rod, main pull rod short, control rod for btpn, knuckle thrower, shank wear plate for cbc, bearing piece assembly, safety loop, brake beam support, locking bracket, spring for bk head (wm), empty load device, end push rod, brake beam hanger (wm trolley), operating arm, brake head adjuster (wm), pin with split pin for bk beam (wm), flap door, door check spring, bolt with nut, rivets ms, split pin, bulb cotter, washer ms black dia m, m.s. channel, angle, round steel bar, ms flat, stud for locking plate, top housing for pu pad, wedge for casnub bogie, center pivot bottom, center pivot top, narrow jaw adapter, wide jaw adapter, p.u. pad, hand brake screw with nut, main pull rod assembly (slack adjuster side), knuckle ht, coupler rod, lock for cbc box, knuckle pin, yoke pin for cbc, handle for center brake rigging, roller for bogie pull rod, automatic twist lock shaft, damaged flappers of gantry, brake beam of casnub bogie, diaphragm, fasteners, brake shoe, sab parts, follower plate etc. location scrap yard krca, near new sick line office. delivery by actual weight only and as is where is basis. custodian sse c&w krca. fdp 50 days. the lot details is as per survey sheet only. delivery will be given after the full payment only
Tender For corrigendum : auction sale of others - scrap of cs and ms containing release unserviceable material of c&w qty 45.00 mt such as such hex head bolt & castel nut, door sealing bracket, door chainless cotter short, swing door bolt eye, man hole cover, vapour extractor cock, filling pipe cap, valve spindle gland, gland for 100 mm lubricated t.p. valve, locking plate, bolster inner spring, wear plate brake beam, brake beam, side frame key for ctrb, bolsterspring snubber, key bolt with spring washer, side frame friction liner, top side bearer liner, height adjustment packing 37 mm, height adjustment packing 12 mm, empty tie rod, loaded tie rod, main pull rod short, control rod for btpn, knuckle thrower, shank wear plate for cbc, bearing piece assembly, safety loop, brake beam support, locking bracket, spring for bk head (wm), empty load device, end push rod, brake beam hanger (wm trolley), operating arm, brake head adjuster (wm), pin with split pin for bk beam (wm), flap door, door check spring, bolt with nut, rivets ms, split pin, bulb cotter, washer ms black dia m, m.s. channel, angle, round steel bar, ms flat, stud for locking plate, top housing for pu pad, wedge for casnub bogie, center pivot bottom, center pivot top, narrow jaw adapter, wide jaw adapter, p.u. pad, hand brake screw with nut, main pull rod assembly (slack adjuster side), knuckle ht, coupler rod, lock for cbc box, knuckle pin, yoke pin for cbc, handle for center brake rigging, roller for bogie pull rod, automatic twist lock shaft, damaged flappers of gantry, brake beam of casnub bogie, diaphragm, fasteners, brake shoe, sab parts, follower plate etc. location scrap yard krca, near new sick line office. delivery by actual weight only and as is where is basis. custodian sse c&w krca. fdp 50 days. the lot details is as per survey sheet only. delivery will be given after the full payment only
Tender For supply of seal, oil, part no. 3020189 , shim, part no. 185573 , shim, part no. 65259c , shim, part no. 65259a , screw hexagon head cap, part no. s173a , gasket, gear cover, part no. 181187 , screw captive washer , part no. 3042888 , washer, plain, part no. 140218 , washer, lock, part no. s 610 , screw, hexagon head cap, part no. 103009 , harness wiring, part no. 3875359 , gasket, flywheel housing, part no. 64565 , screw, hex head cap, part no. s 112 , seal, oil, part no. 3020187 , gear, flywheel ring, part no. 124507 , shaft pivot, part no. 3003393 , washer, plain, part no. 3014103 , camshaft, part no. 4073136 , pump, lube oil, part no. 4979719 , shaft, barring, part no. 3201739 , valve, intake, part no. 3083876 , screw, captive washer cap, part no. 3014766 , screw, hexagon head cap, part no. s 137 , gasket, gear housing, part no. 181085 , elbow, male adapter, part no. 68139 , nozzle, piston cooling, part no. bm98572 , shield, heat, part no. 3058349 , gasket, connection, part no. 216487 , spacer, bearing, part no. 3229036 , clip, part no. 107460 , plug expansion, part no. 3007635 , tee, male adapter, part no. 3039532 , connector male, part no. 116935 , heat exchanger gasket, part no. 4009319 , heat exchanger gasket, part no. 4009318 , gasket, sea water pump, part no. 3055769 , screw, hexagon head cap, part no. 216701 , screw, twelve point cap, part no. 3028279 , plug, threaded, part no. 173085 , plug, ball, part no. 3047961 , barrel and plunger, part no. 3238193 , screw, hexagon head cap, part no. 108601 , screw, socket set, part no. 168319 , nut regular hexagon, part no. s 212 , screw, hexagon head cap, part no. 209700 , tee, female pipe, part no. 70802 , connector, male, part no. 68138 , bracket, air filter, part no. 3236417 , set piston rings, part no. kit3803471 , washer, plain, part no. 3025100 , screw, hexagon head cap, part no. s 145 , spring, compression, part no. 173176 , washer , plain, part no. 153520 , screw, hex flange head cap, part no. 3005508 , screw, hexagon head cap, part no. s 169 a , screw, hexagon head cap, part no. 169195 , spacer, mounting, part no. 148916 , screw, twelve point cap, part no. 3015585 , tappet, valve, part no. 4071615 , cap screw hex, head cap, part no. 3237429 , bushing, part no. 3060905 , seal keyway, part no. 3200287 , cap, fuel pump filter, part no. 157088 , coupling, plain hose, part no. 3069170 , exchanger, heat, part no. 4104786 , gear, engine barring, part no. 206091 , disc, valve, part no. 196057 , screw hexagon head cap, part no. s 173a , washer, lock, part no. s 603 , o ring, part no. 215705 , shim, part no. 65259b , dowel, pin, part no. 64816 washer lock, part no. s 679, washer, plain, part no. s 610, screw, hexagon head cap, part no. 669121a, screw, hexagon head cap, part no. s 109, clip, part no. 204263, brace, tube, part no. 101476, clamp, t bolt, part no. 140315, clamp, t bolt, part no. 125741, clamp, t bolt, part no. 125742, dust cap, part no. 3225660, bushing, part no. 140330, washer, part no. 69699, plug, pipe, part no. 3008469, screw, hexagon head cap, part no. 212752, elbow, male union, part no. 3033024, elbow, male union, part no. 118347, elbow, male adapter, part no. 120437, o ring seal, part no. 3011337, seal rectangular ring, part no. 215090 , plug pipe, part no. 3025458, nut, heavy //bid details 2 / 92
Tender For supply of knuckle pivot pin for h type tight lock coupler with aar 'h' head and balance draft gear to rdso specification no. rdso/2011/cg-03 (rev.-03) [ warranty period: 30 months after the date of delivery ]