Get complete information related to latest Bolts And Nuts Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bolts And Nuts Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bolts And Nuts Tenders.
Tender For supply of one meter long fish plate to rdso drgno. t-5916 with latest alterations for 60 kg (uic)/ 60e1 rails (each set of 1 mtr long fishplate comprise of 02 nos of fish plate to rdso drg no. t-5916 an d 06 nos fish bolts & nuts to rdso drg no. t-1899 and 06 nos single coil spring washers to rdso drgn o. t-1077 3), conforming to irs specification no. irs/t-1-2012(provisional) with acs no. 1 of sep2018 with latest amendment [ warranty period: 30 months after the date of delivery ]
Tender For various routine/preventive and breakdown maintenance work on as and when require basis at chp-gtps - replacement of hammer rings for stage ii crusher , replacement of hammer rings for stage i crusher , replacement of screen plate / breaker plate/kick off plate of stage i and ii crushers , replacement of rotor of stage i crusher with disassembling of removed rotor and assembling of new/repaired rotor , replacement of drive end side bearing / pedestal of crusher rotor or complete gear coupling set of crusher or repositioning of dislocated rotor of crusher , replacement of non drive end side bearing/pedestal of crusher rotor or complete alignment of crusher motor with crusher rotor , replacement of broken hammer rings of stage i and ii crushers (stage i crusher up to 12 nos.of hammer rings and stage ii crusher up to 06 nos. of hammer rings at a time) , replacement of rail of rail table of wagon tipplers 1/2/3/4 (in one side full length) , replacement of clamping rubber pads of clamp for wagon of wagon tipplers , replacement of whole resting pads for wagon of side beam of wagon tipplers , replacement of spill plate roller of wagon tipplers , repairing/preparation/ fitting and replacement of hooks/rods/turn buckle, chain, sling rope ,spring assembly etc. of vibrating trays and crusher house trays , spillage control at various locations , miscellaneous cutting/welding work require at various locations , replacement of gearbox in conveyor no. 2a/b,11a/b,12a/b,13,14/15,16a/b,17a/b ,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of gearbox in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement of slow speed coupling set (two halves) of drive pulley , replacement of coupling boltsand rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.2a/b,11a/b,12a/b,13,14/15,16a/b,17 a/b,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of coupling boltsand rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement/removing/refitting of various size and type of fluid coupling , replacement or removing & refitting of any internal/bearing/input/ output oil seal of various size and type of gear box , overhauling of dismantles old/used gearbox in all respect with fitment of input and output coupling. , replacement of drive pulley , replacement of drive end side bearing of drive pulley or repositioning of dislocated drive pulley , replacement of non drive end side bearing/any side pedestal of conveyor drive/non drive pulley , alignment of motor/ gearbox/drive pulley including decouple/couple of coupling , nut bolt and drive system checking with replacement of broken nut bolt in all 04 wagon tipplers no.1/2/3/4 as per scope , lifting and releasing of gravity take up of any conveyor belt for locking and de locking of belts for other than belt replacement work , loosening and tightening of horizontal type screw take assembly of any conveyor belts for other than belt replacement work , work of dismantling and re erection of new/repaired apron pan from existing apron feeder of wagon tippler , repairing of upper/lower structure/cone plates of damaged/bend apron pan , replacement of carrying roller of apron feeder , replacement of worn out/ damaged ti roller and garland rollers. , replacement of worn out/ damaged impact rollers , replacement of worn out/ damaged return rollers , replacement of various worn out/ damaged ti roller stands , replacement of various worn out/ damaged impact roller stands , replacements of various worn out/ damaged return roller stands , replacement of various worn out skirt rubbers [10 m each] and skirt rubber with angle , preparation and replacement of guide rollers with bracket in place of worn out/ damaged guide rollers as
Tender For supply of primary supports for nalco alumina 5th stream refinery - supply of primary supports, including packing & forwarding as per mr., pipe saddle, un 3786-01, consisting of plate, acc. to, un 3786-03 and manufact., drwg., loose point, plate 1.0038 s235jrg2, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of u-bolt, contact surface,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025vizag(3)+damanjodi(22)=25, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570, contact surface,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570, contact surface,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025vizag(38)+damanjodi(222)=260, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(23)+damanjodi(291)=314, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(4)+damanjodi(451)=455, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(5)+damanjodi(321)=326, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(60)+damanjodi(354)=414, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(3)+damanjodi(114)=117, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(10)+damanjodi(64)=74, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025vizag(5)+damanjodi(77)=82, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of two u-bolts, contact surface,, acc. to un 3786-03, and manufact. drwg., fixed, point, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of two u-bolts, form a din 3570, contact, surface, acc. to un 3786-03, and manufact. drwg., fixed, point, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025, u-bolt, un 3786-01, consisting of two u-bolts, form a din 3570, contact, surface, acc. to un 3786-03, and manufact. drwg., fixed, point, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025vizag(3)+damanjodi(27)=30, u-bolt, un 3786-01, consisting of two u-bolts, form a din 3570, contact, surface, acc. to un 3786-03, and manufact. drwg., fixed, point, u-bolt 1.0036 s235jrg1, con.surface 1.0038 s235jrg2, mat. deliv. cond. en 10025, u-strap, un 3786-01, consist