Latest bone wax Tenders | Government bone wax Tenders

Central Government / Public Sector

CTN :40589780

24 Jun, 2025 NA

Multi City - Multi State

Tender For supply of inhibited mineral insulating transformer oil conforming to is:335 (type ii with inhibitors) or latest, with the followin g additional parameters as per rdso letter no:ti/psi/insoil/policy/19 dt. 26.07.19, or latest. (1) parmater: lowest cold start energising te mperature(lcset)- requirement - 0 degree c. (2) flash point- minimum -requirement ;140 degree c. (3)presence of oxidation inhibitor (dbp c-2, 6diteriary-butyl-para-cresol)- requirement: range( 0.25 to 0.30) percent. (4) oxidation stability- (a)total acidity(neutralization value aft er oxidation- requirement: max, 0.20 mg koh/g, (b)total sludge after oxidation- requirement: max, 0.05 percent. [ warranty period: 30 m onths after the date of delivery ]

Central Government/Public Sector

CTN :40581191

13 Jun, 2025 NA

Durg - Chhattisgarh

Tender For supply of allen key 14mm , allen key 17mm , d e spanner 32x36 , ring spanner 32x36mm , d e spanner 36x41mm , ring spanner 36x41mm , single head spanner 55mm , d e spanner41x46mm , ring spanner 41x46 , d e spanner 46x50mm , ring spanner 46xsomm , pipe wrench 12 , pipe wrench 18 , pipe wrench 24 , slide wrench 6 , insulating cutting plier 8 , nose plier 6 , hacksaw frame 18 , half round file 12 , flat file 12 , pincer 6 , oil cane , sledge hammer 20lbs with handle , filler gauge 0 point 03 to 1 point 00mm , pitch gauge inch , digital vernier calipers 300mm , spirit level , round file 12 rough , measuring tape 30 mtr , triangular file 8 , allen key size 1 to 10mm , d e spanner 6 32mm , ring spanner 6 32mm , d e spanner 55x60mm , thread making tap 16mm , tap handle , circlip plier inner , circlip plier outer , micrometer 100 to 150mm , micrometer 150 to 300mm , pitch gaugemm size , hand drill machine , bearing puller dia point 50mm , dial indicator , caliper inside and out side , box spanner set 10 to 46mm , measuring tape 15 mtr , screw jack 5 ton , rotary barrel pump manual , drill bits 6mm to 18mm , slide wrench 12 , screw driver 8

State Government

CTN :40567065

23 Jun, 2025 NA

Kinnaur - Himachal Pradesh

Tender For supply of insulating oil for transformer as per powergrid ts (q3)

State Government

CTN :40082154

09 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : online rate contract tender for supply of surgical consumable and kits to various hospitals of government of madhya pradesh for a period of 18 months - consumables, 1/2 ccs cut needle 48 mm stainless steel(length 45 cm size 4),needle, a v fistula sterilized twin needle(17 g (two needle pack)),, adult - double lumen catheter set(size: 11.5 fr-12 fr, 13cm to 15cm (curved)),, adult - double lumen catheter set(size: 11.5 fr-12 fr, 13cm to 15cm (straight)),, airway, nasopharyngeal, sterile, single use, set with 6.5mm(external diameter),, airway, oropharyngeal guedel, set with size of: no. 4(90 mm),, alcohol based hand sanitizer (500ml bottle with dispenser),contain, isopropyl alcohol not less than 75% v/v or ethanol not less than 80% v/v , hydrogen peroxide,0.125%v/v, glycerol 1.45 % v/v, distilled water/purified water / de-mineralised water(500ml bottle with dispenser),, bag(spikes),(as per attached specification), bcg(1 ml each),syrings, bone wax sterilised(2.5 gm/packet), brain thromboplastin(5ml bottle), capd fluid (continuous ambulatory peritoneal dialysis fluid) 1.5% 2 litre bag(each),(as per attached specification), capd fluid (continuous ambulatory peritoneal dialysis fluid) 2.5% 2 litre bag(each),(as per attached specification), capd simple(disconnect set),, central venous catheter kit(single lumen),kit, close wound drainage device under negative pressure(closed wound suction unit) size 200 ml(catheter size 16, each),, close wound drainage device under negative pressure(closed wound suction unit) size 200 ml(catheter size 18, each), collagen sheets(10 x 10 cm sheet),sheet, disposable hypodermic, needle for opthalmic use no-2, 1", disposable nasal canula compatible for heated humidified high flow oxygen therapy(pediatric size), disposable needle (20g), disposable needles (22g),surgical material, disposable needles (23g),needle, disposable needles (26 g (1 1/2 inch)), disposable needles (26 g (1 inch)), disposable needles (26 g),needle, disposable pricking lancet (pkt of 200 units), disposable scalp vein set size 22 no, disposable scalp vein set(size 20 no),, disposable spinal (l.p.) needle(25g),surgical material, disposable spinal needle(22 no),each, disposable spinal needle(23 no),each, disposable suction catheter(size 12),, disposable suction catheter(size 14),, disposable syringe {auto disabled (ad)/re-use prevantion(rup) syringe}((for vitamin k inj)(1ml with needle 26g)),, disposable(24-g each),needle, dj stent for ureter,8 fr, double lumen polyurethane cvp catheter 4 to 5 fr(length 8 to 13 cm,),, endotracheal tube internal with radioopaque line(dia 2.5 mm to 5 mm), endotracheal tube no 5.5(uncuffed),each, endotracheal tube no 6.0(uncuffed),each, endotracheal tube, soft cuff towards the distal end kink resistant inflation tube murphy eye at distal end with polished smoothness standard 15 mm connector sterile, single use curved shaped blister pack-suiting the shape of product(size 4 , each),tube, endotracheal tube,soft cuff towards the distal end kink resistant inflation tube murphy eye at distal end with polished smoothness standard 15 mm connector sterile, single use curved shaped blister pack-suiting the shape of product(size 3),tube, endotracheal tubes size 9.5 cuffed should have low pressure high volume cuff and radio opaque line(size 9.5 , each),, feeding tube (catheter)(10 g, each),, femoral catheters double lumen kit curved double lumen catheter set(12 f (curved) adult),, fistula sterilized twin needle(16 g (two needle pack)),, follyscathetor 10 no(pediatrics),, follyscathetor 8 no(pediatrics ),, hickman catheter single lumen(4.2 fr),(as per attached specification), hickman catheter single lumen(6.6 fr),(as per attached specification), hme filter(as per attached specification), each, hypodermic needles for single use bis gauze(23 length, 25 mm +-1),needle, i.v cannula (two way) size(16 nos),, i.v cannula for single use (intravascular catheters) bis (gauze 22,length 25), i.v cannula size with inj. va

CTN :40572531

20 Jun, 2025 NA

Indore - Madhya Pradesh

Tender For dental materials - 1.5 mm "x" miniplate s.s., 1.5 mm "y" miniplate s.s., 1.5 mm "l" miniplate with gap left s.s., 1.5 mm "l" miniplate with gap right s.s., 1.5 mm "l" miniplate without gap left s.s., 1.5 mm "l" miniplate without gap right s.s., 1.5 mm 4 hole miniplate with gap (straight) s.s., 1.5 mm 4 hole miniplate without gap (straight) s.s., 10 mm screw for 2.5 mm plate, 10 mm screw for 2mm mini plate ss, 2.5 mandibular reconstruction (20 hole) plate with angle, 2.5 mandibular plate left angle s.s., 2.5 mandibular reconstruction (20 hole) straight plate s.s., 2.5 mm mini plate 6 hole with gap, 2.5mm 4 hole miniplate with gap (straight) s.s., 2mm 10 hole miniplate s.s., 2mm 20 hole miniplate without gap (straight) s.s., 2mm 4 hole miniplate without gap (straight) s.s., 3.0 round body silk suture, 5% taper hand endodontic files, 6 mm screw for 2mm mini plate ss, 6 mm screw for 2.5 mm. mini plate, 6 mm screw x 1.5 mm for 1.5 mm mini plate, 8 mm screw for 2.5 mm plate, 8 mm screw for 2mm mini plate ss, 8 mm screw x1.5 mm for 1.5 mm mini plate, abrasive & polishing burs, abrasive finishing stone for ni-cr &cr-co. assorted, abressive sand for sand blaster 1 kg, absorbable gelatine sponge (abgel), absorbent paper (plain), absorbent points(15-40)(45-80), accuchek strips, acrylic cold cure 400 gms.& 400 ml.both in single pack, acrylic cold cure shade for jc different shades a(1)b(1)c(1)d(1)e(5)f(1)450 gm.450 gm. powder., acrylic heat cure 450 gm. powder, 256 ml, liquid, 112 ml. cold mold seal pink/clear, acrylic heat cure shade for jc different shades a(1)b(1)c(1)d(1)e(3)450 gm.powder, acrylic trimmer stone t2, acrylic trimmer stone t1, acrylic trimmer stone t3, acrylic trimmer stone t4, adhesive plaster roll, air rotor cartridges (std. and high torque), airotor burs (diamond) different shapes, airotor diamond burs tapering, with ce mark, airotor diamond burs flat fissure with ce mark, airotor diamond burs inverted cone with ce mark, airotor diamond burs round with ce mark, airotor spray for quick lubrication of handpiece (approx. 500 ml), alcohol 100% (ethanol ), alginate impression material 1125 gms. jar, alpine green wheels assorted for contra angle hand piece & streaght hand pice, alu wax, amalgam finishing kit, ammonia, antiseptic lotion, apf gel with fluoride application trays 200 gm. pack, arsenic fiber for dental use, articulating paper for prosthodontic purpose to check occlusion, austins retractors, automix gic type ii capsules, b.p. blade (11 no.), b.p. blade (15 no.), b.p. blade (15c no.), band material .125x.003, band material .150x.003, band material .150x.004, band material .180x.005 molar, barbed broches 21 mm (pkt 6 piece), base former moulds adult, base former moulds pediatric, base paste for ceramic, base plate shellac u/l, beading wax, biodentine, bite registration paste., bleaching kit - in office gel form, bleaching powder, blockout wax, bod gardner pattern mallet, bondable & weldable beggs oval buccal tubes, bondable beggs round buccal tubes double weldable beggs round buccal tubes double , bondable brackets beggs high flauge (flat & curved), bonding material light cure (trans bond xt), bonding material self cure (rely a bond), bone graft material synthetic - tricalcium phosphate , hydroxiapatite and /or combinationdfdba, fdba, glass reinforced, bone graft material containing glass particle, particle size above then 90 micron, bone graft material bmp s and growth factors, bone graft material dfdb, bone graft material fdba, bone graft material hydroxyappatite crystal,, bone graft material synthetic alloplastic material, bone graft material tricalcium phosphate, bone graft material xenografts, bone wax, botroclot, bow friction stop 100-092 (ortho or g), boxing wax, brackets (beggs) weldable ), brass pin stage 1,2,3 lock pins, brass wire ( 0.7mm), brush for denture cleaning, buccal tube bondable .022x.028 mbt single double & u/l & u / triple, buccal tube weldable .022x.028 mbt sin

Central Government And Public Sector

CTN :39762063

04 Jun, 2025 NA

Darjeeling - West Bengal

Tender For bid to ras supply of supply of on-line insulating oil drying system for generator transformer of teesta low dam-iv , installation & commissioning of on-line insulating oil drying system for generator transformer tldiv

CTN :40065393

05 Jun, 2025 18.84 Lacs

Netanar - Chhattisgarh

Tender For corrigendum : providing of custom bid for services - testing of insulating oil of ehv and hv class power transformers for a period of two years for 3 mtpa isp at nagarnar, near jagdalpur chhattisgarh state

Central Government/Public Sector

CTN :40533433

02 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of spare for insulating oil handling system

CTN :40506872

18 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - weasher 3 by 8 inch bsf , o ring , nut brush terminal(os sl no-187) , bearing cap bolt(os sl no-7) , spnr de 14x15mm(ces cps260) , bolt self lock 1.5 inch f by whsg , hexagon socket screw (os sl no-142) , stud for silencer connection , set screw for front cover(os sl no-157) , nut cyl head , o ring , dowel pin (os sl no-133) , joint (os sl no-140) , joint (os sl no-111) , nut for air cleaner mtg stud (os sl no-149) , spl screw 5 by 16 bsf , o ring for rocker bracket , stud 5 by 16 inch x 1.25 inch long , joint , bearing bush de , joint for transfer block (os sl no-122) , joint (os sl no- 128) , bolt crankshaft to adaptor , special simmonds nut , spring , stud for injector pipe clamp , locking plate (os sl no-16) , joint (os sl no-103) , shim 0.0003 feet thick (os sl no-131) , shim 0.0005 feet thick(os sl no-132) , gasket(os sl no-188) , hose 9 by 16-0.5mtr , gasket , joint (os sl no-141) , o ring for delivery pipe flange , bolt (ms sl no-117) , joint for air clearance base (os sl no-150) , insulating washer (os sl no-190) , rubber faced washer for cyl head cover (os sl no-1 , stud cyl head to ex manifold (os sl no-151) , valve cap(p-21) , timing pointer (os sl no-58) , bolt fly wheel (p-57) , abutment washer , rubber shroud (os sl no-137) , split pin (os sl no-207) , jublee clip (os sl no-255) , exhaust manifold gasket (os sl no-153) , gasket cover cylinder(chicago260) , joint timing case to back plate , circlip (os sl no-202) , plug (p-37) , joint back plate to crank case , plier insulated 150mm(ces-34) , joint for inlet manifold (os sl no-148) , joint for rear cover (os sl no-163) , o ring (p-11) , o ring (os sl no-121) , joint for front cover (os sl no-159) , locator pos terminal (os sl no-191) , ferrule , connection piece , gasket for discharge pipe , gasket for discharge pipe , grease cap 3 by 8 bsf(chicago) , oil seal (os sl no-129) , insulator washer (os sl no-192) , filer element assy , joint for side cover rh rear (os sl no-162) , brush spring , spring inner , hammer engineer ballpein 0.5 kg , brush(a l page-109) , hose 9 by 16-1.8mtr , bearing bush , o ring (os sl no-96) , felt pad (os sl no-224) , banjo bolt , tab washer , joint crankshaft seal hsg to f by w hsg (os sl no-66) , insulator (os sl no-186) , tee coonection(p-13) , hose 9 by 16-2mtr , brush connector positive , valve spring , valve , l bracket (p-55) , dowel pin(dia14x30)(ces-33) , joint for side cover rear to c by c(os sl no-161) , centre tube (os sl no-155) , bolt , main bearing cap (p-7) , bush assembly , ceramic insert (os sl no-136) , joint (ms sl no-16) , heatsink assy positive , bushing body o pump (p-7) , s assy of pipe feed pump to filter (os sl no-102) , covering plate (os sl no-70) , oil seal , oil seal burton wood(ctlg p-23) , oil relief valve(ms sl no-03) , anti vibration mount(p-25) , set screw (os sl no-50) , oil filter cap (os sl no-167) , s assy of pipe feed pump to filter (os sl no-104) , tee connection(p-13) , s a of pipe filter to fuel pump(os sl no-105) , spring (pinion)(os sl no-212) , fan belt (oem) , auxiliary diode , insulator (os sl no-195) , kit thrust washer(os sl no-4) , plug(p-29) , water pump seal (os sl no-135) , o ring (p-29) , lead assy y positive (os sl no-189) , o ring(p-3) , s a of pipe oil , c e bearing (os sl no-231) , regulator , flexible hose(p-29) , roller bearing hofman (os sl no-83) , ball bearing hoffman (os sl no-84) , o ring(p-3) , front cover (os sl no-156) , taper roller bearing (os sl no-130) , heat sink assy aux (os sl no-197) , driving shaft (os sl no-134) , joint housing to back plate(ms sl no-67) , bush assembling kit(p-61) , element filter , filter service indicator(chicago p-20) , liner cyl s by s outer dia y (p-7) , de bearing , p2p controller service kit(os em r655 dt 01.02.19) , bearing sre , hose filter to fuel pump , rotor assy(a l page-99) , ring set(p-15) , cable(p-11) , kit main bearing(chicago) , oil by pass valve , s a of fan 19.5 in dia 6 blade (os sl no-125) , thermo