Get complete information related to latest Boundary Work Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Boundary Work Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Boundary Work Tenders.
Tender For custom bid for services-emergency repair/ replacement of header in kb line pump house under age e/m (west) of ge (west) agra-1 taking down supplying, fixing, testing and commission of ms header made out of heavy duty erw pipe of size 300 mm dia with end plates of 6 mtrs length with inlet connection 200 mm dia03 , and outlet connection 150 mm dia -03 nos on pcc pillars complete all as specified and directed. note:- all accessories like all fittings ( standard ms fittings with welded joint shall be used on the pipes) including tees, elbows, d-joint, reducer, union , flanges, rubber gaskets, gi nuts bolts, washer, including supporting/ fixing the pipe on floor/wall/ ceiling with clamps, hangers, angles with clamps, hangers, angles as per specification complete with two or more coats of synthetic enamel paint of approved make/ shade over one coat primer complete. 01 job 2 taking down and s&f ms pipe erw steel including specials, nominal 300 mm dia as per is 3589 (1981) thickness 5.4 mm. 3 taking down & s&f ms pipe erw steel including specials, nominal 200 mm dia as per is 3589 (1981) thickness 5.4 mm. 4 taking down & s&f ms pipe erw steel including specials, nominal 150 mm dia as per is 3589 (1981) thickness 5.4 mm. 5 taking down & supply, laying and jointing for the 100 mm bore on floor/wall, galvanized steel tubing medium grade including isi marked gi fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of tee or ms clamp complete all as specified and directed 6 taking down & supply, laying and jointing for the 80 mm bore on floor/wall, galvanized steel tubing medium grade including isi marked gi fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of tee or ms clamp complete all as specified and directed. 7 s&f in replacement 200 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 8 s&f in replacement 150 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 9 s&f in replacement 100 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 10 s&f in replacement 80 mm bore cast iron sluice valve both ends flanged pn-1.6 with iron wheel (isi marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed. 11 m&l for rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 complete all as specified and directed. 12 excavation with the help of jcb and labour charges.
Tender For renovation, beautification and installation of play equipments at jhilmil park at ward no.02 - spiral slide : slide made of 8mm thick frp sheet. chute2.5 wide, platform 2x2.5, height of platform 6, height of structure8, made of gi pipe of 0.75"nb to 1.5"nb dia., double swing : dimension:10x6x8(ht.), legs and crossbar constructed of 50nb gi pipes, 6mm rubber coated chains. seats made of frp with ms reinforcement. finished with asian paints pu, merry go round : 4 seater, size:diameter:5, main pipe 75nb gi pipe, supporting pipes 40nb gi, handle 18nb gi, seats:12"x10" made of frp, pu paint, double see-saw : size: 4x10. made of 50nb gi pipes and 18nb gi pipes for handle and leg rest. seates made of frp of size 10x7 each fitted with 6" spring at the bottom of seat for easy bounce back. finished with pu paint, park bench ( cast iron bench ) : banch made of cast iron and iron or sal wooden planks. l=4.5, supplying model dust bin: made of frp. height:3 and dia.18". finished with synthetic enamel paint., fabrication and supply of glass fiber models, sculpture, mannequins etc. having height up to 1.0 m, supplying and stacking of good earth (adequate for horticulture work) at site including royalty (earth measured in stack will be reduced by 20% for payment), supplying and fixing grasses tiles of grass maxican carpet/selection no. 1 healthy & fresh grasses (size 1x1 or bigger) including watering and maintenance of the lawn for 30days or more till the grass forms a thick lawn free from wees and fit for mowing including supplying good earth as required by engineer-in-charge. (rate includes supply of labour, tools & plants including materials), (b) priming one coat on timber or plastered surface with synthetic enamel oil bound primer of approved quality including smoothening surfaces by sand papering etc., (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary., (a) on timber or plastered surface: (1) with super gloss (hi-gloss). (iv) two coats (with any shade except white)., supplying and planting of different plant /trees ( supplying well grown plants bushy and healthy, minimum height as specified i.e.exposed height including all leads & lift,carriage, handling, manuring, applying presticide and fertilizer etc., xix) bougainvillea (name variety, bushy plants, full bloom) of height 90cm-60cm incement pots of size 30cm., supplying and planting of different plant /trees ( supplying well grown plants bushy and healthy, minimum height as specified i.e.exposed height including all leads & lift,carriage, handling, manuring, applying presticide and fertilizer etc., vi) duranta healthy plant of big size, supplying and planting of different plant /trees ( supplying well grown plants bushy and healthy, minimum height as specified i.e.exposed height including all leads & lift,carriage, handling, manuring, applying presticide and fertilizer etc., xxxiii) dracaena reflexa of height 30 cm to 90 cm in earthen pots of size 20 cm., supplying and planting of different plant /trees ( supplying well grown plants bushy and healthy, minimum height as specified i.e.exposed height including all leads & lift,carriage, handling, manuring, applying presticide and fertilizer etc., ii) rangon chineese of size not less than 20cm, supplying and planting of different plant /trees ( supplying well grown plants bushy and healthy, minimum height as specified i.e.exposed height including all leads & lift,carriage, handling, manuring, applying presticide and fertilizer etc., viii) china palm of leaves 4-5 in earthen pots size 25cm, weather coated wall fine art (including all materials, colour etc.) as directed., single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., labour for laying single brick flat soling including rammi
Tender For bid to ras supply of propeller type ac ventilating fans - exhaust fans (v2) as per is 2312 (q2) , electric ceiling fan with bldc motor (v3) isi marked to is 374 (q2) , led street light 120 w having microwave motion sensor the fixture would have an efficacy of 135 lpw as system efficacy and 175 lpw as chip efficacy ip 66 , led light 72 w post top victorian look suspended mounting arrangement to be mounted on poledo fuse element 11kv 5 amp , led bollard ufo shape 2 feet height 10 w , supply only 5 star 1 point 5 ton hi wall split units indoor outdoor complete with cordless remote control unit and with cooling and heating function of capacity complet connected accessories , supply only electric water heater storage type steel body with copper inner tank and heating element up 2 kv capacity 25 litre bee 5 star , supply only water cooler fully stainless steel electric driven single phase having approx storage and nominal cooling capacity of 40 divide 80 ltrs per day complete , smart led street light endprlplussl 120 watt led 730 pasytopic micr sensor base operation detection range 10 metre light , led street light endprlplussl 120 watt led 730 pasytopic micr sensor base , supply only 12 volt 65 ah sealed maintenance free battery for 30 kva online ups installed at hq swc bldg , wall mounting fancy lightfitting 9 watt complete , lt 1 point 1 kv cable and termination joint 3 point 5 core 25 to 50 sqmm , lt 1 point 1 kv cable and termination joint 3 point 5 core 70 to 120 sqmm , lt 1 point kv cable and termination joint 3 point 5 core 185 sqmm , exhaust fan iron body of size 300 mmvolt single phase , xlpe cable joint ht of size 150 sqmm 3 core straight through joint for 11 kv , xlpe cable joint ht of size 185 sqmm 3 core outdoor end termination type , shaivi pipe supporting clamping system s4 channel 10 feet 1 nos profile bracket 3 to 2 nos ubolt rm 4mm to 1 nos zinc coated nails , shaivi pipe supporting clamping system s4 channel 10 feet 1 nos profile bracket 3 to 1 nos ubolt rm 75mm 1 nos zinc coated nails , shaivi pipe supporting clamping system s4 channel 18 feet 1 nos profile bracket 3 to 2 nos ubolt rm 20mm 4 nos zinc coated nalis 4 nos , heating element 1 point 5 kw large tringle cup type , led spot light 9 watt complet set , heating element 1 point 5 kw round cup type , glass pane pin headed 4mm thick 4 x 3 sheet , glass pane plane 4 mm thick 4 x 3 sheet , galavnised mild wire mess 0 point 90x 15 mtr tube , forged valve 15mm bore half turn , looking mirror 18x 15 mm with plastic frame , lighting arrestors for 33 kv heavy duty set of 3 pc , glavanise wiremesh 5mm dia wire average width 1 point 14 mm wire mesh width 1 point 12 mtr and 50 feet long , straight through joint for xlpe cable 11 kv of 95 sqmm , lt straight through joint 70 to 95 sq mm , indoor end joint 70 to 95 sqmm , straight through joint for xlpe cable 11 kv of 120 sqmm
Tender For providing and installation of electro-mechanical accessories at cwr site and allieds works at ekpara pwss, block-rampurhat-i under bolpur mechanical division - supply and delivery of openwell submersible pumping machinery set suitable for wet pit installation complete with stainer along with all accessories with following specification: pump : discharge (q) : (1800-1280) m3/hr. & head (h) : (19-38) mtrs.method of starting : sd, shaft-stainless steel-ss-304, impeller- crome steel/ci/s.s / bronze, suc & del size- 90/80 mm dia, type of position-horizontal. mechanical sealmotor : 12.5hp (suitable for open well)operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2800 rpm, method of starting : s/dmake : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor. ( n.b : manufacturers test certificate along with charecteristics curve, moc and gurantee certyificate have to be submitted at the time of delivery.), supply & delivery at site of 35 mm x 3.5 core size aluminum armored, xlpe insulated 1.1 k.v. grade cable, conforming to is 7098(i) as per direction of eic.(make:- gloster / polycab / mescab / or any approved vendor list of phed.) ( n.b : manufacturers test certificate have to be submitted at the time of delivery.), supply & delivery of 100a kit-kat rewireable (porcelain fuse carrier & base) (make:- havells / l&t / or any approved vendor list of phed.), supply & delivery of 100 amps re-wireable porcelain fuse unit type tpn main switch with steel sheet enclosure (conforms: is/iec600947-1&3). (make: havells /approved vendor list of phed.), supply & delivery of re-wireable type tpn changeover switch 100 amps 415v, 50hz, 4 pole offload with steel sheet enclosure (conforms: is/iec60947-1&3). (make: havells /approved vendor list of phed.), 100 amps, 4way, wall mounted copper busbar chamber with steel sheet enclosure (conforms:is/iec:60947-3). (make: havells /approved vendor list of phed.), supply and delivery of the following pipes, valves, pipes and gauges etc at site-- (make: approved vendor list of phed.), 100mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 150mm dia m.s. black pipe p/e conforming to is:1239 part-1 (2004), heavy (c class)., 100mm dia m.s. blank flange 15mm thick perforated as per is1538., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 100mm dia. cast iron double flanged manually operated rising spindle type sluice valve generally conforming to is: 14846, having body, door, dome / bonnet, gland in graded cast iron to is 210 gr. fg 260, four faces of ss aisi 304 and spindle nut of gunmetal to is 318 gr. ltb 2, outside screw rising stainless steel aisi 304 spindle, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges faced and drilled to is:1538 table 4 & 6. valves tested by closed end method only. (moc & tc needed for valve)., 100mm dia. cast iron double flanged single door swing non-return valve generally conforming to is:5312 part i, having body, door, cover in graded cast iron to is 210 gr. fg 260; body & door rings of stainless steel to ss aisi 304 , hinge pin of ss aisi 304, valves suitable for a maximum working pressure of 10 kg/cm (seat test) & body tested to 15 kg/cm . flanges drilled to is 1538 table 4 & 6.(moc & tc needed for valve)., 100 mm dia dismantling joint pn-1.0 ci dismantling joint complete galvanised , stud, nut and washer and follower flanges, drilled to is:1538 table 4 & 6. ( at delivery side of pump ), supply & fixing of perforated gi cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. s&f gi connector, 6mm dia ms suspender, bolts & nuts, steel fastener etc. as required of the following size. incl. al painting of ms support. [200x50x1.25mm x 3mtr long (18swg)] [app
Tender For supply of fabricated items based on the drawings - hook bolt assly rail for eot crane as per drg no m by m by 199 by 4 , dust sealing channel for impeller breaker as per drg no m by m by 389 item 3a , dust sealing channel for impeller breaker as per drg no m by m by 389 item 3b , tube mill coupling bolt basic and silica between gearbox and tube mill as per drg no m by m by 053 by item 1 , pan side scraper arm for 1 ton cci mixer mcb shop as per drg no s 0020 000 p0050 , pan side scraper for 1 ton cci mixer mcb shop as per drg no s 0020 000 p0052 , agitator mixing blade with hard facing 12 blades in one set for 1 ton cci mixer mcb shop as per drg no s 0020 000 p0047 , pan bottom scraper for 1 ton cci mixer mcb shop as per drg no s 0020 000 p0053 , pan bottom scraper arm for 1 ton cci mixer mcb shop as per drg no s 0020 000 p0051 , pan supporting roller assy 511 09 00, for light mixer machine as per drg no m by m by 138 by c , wall scraper for light mixer machine as per drg no m by m by 026 by c , vibrating screen clamp as per drg no m by m by 124 , lever assy for skip hoist as per drg no m by m by 113 by r3
Tender For corrigendum : supply and installation of electrical fixtures and gadgets in bolpur ib at bolpur under burdwan zone in west bengal. - supply & delivery of 3 phase 415v fixed speed cassette type air-conditioner machine having cooling capacity not less than 14100w, eer 2.7 to 3.2, noise level not more than 56db. this cassette type air conditioning machine should be fitted with scroll compressors, lcd remote & all other accessories suitable for refrigerant-r32/r410a. (make-o-general /mitsubishi electric/mitshubishi heavy industries as per approved by eic/authority)., supply & delivery of 240v split air-conditioner machine having cooling capacity not less than 6875 w, isser 3.8 to 4.39, bee rating not less than 3 star, noise level not more than 46db. this split air conditioning machine should be fitted with rotary compressors, lcd remote & all other accessories suitable for refrigerant-r32/r410a. (o-general /mitsubishi electric /mitshubishi heavy industries as per approved by eic/authority)., installation, testing & commissioning of the above-said split ac outdoor unit on existing iron structure and indoor unit on wall & mending good the damages as per direction of e.i.c., installation, testing & commissioning of the above-said split ac outdoor unit by fixing iron angle unit on wall & mending good the damages as per direction of e.i.c., supply & installation of extra add-on items- hvac grade 5/8"(for suction) & 3/8"(for discharge) 1.15mm thickness copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & installation of extra add-on items- hvac grade 5/8"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & installation of extra add-on items- hvac grade 1/2"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & laying of 4core 2.5sq.mm 1.1 kv insulation grade sheathed cu cable with gas line as per direction of eic for making interconnection/communication between indoor to outdoor unit of split type ac m/c.(make- havells/finolex/polycab as approved by e.i.c), supply and laying 5/8(20mm) heavy type pvc pipe for water drainage., supplying, fabrication & fixing of iron stand of m.s. angle size (40 mm x 40mmx6mm) for installation of outdoor unit of 4.0 tr split ac incl. drilling 2 nos holes in each angle and horizontal angle angle 40 mm x40mm x 6 mm in each stand. each stand will be properly fixing by supporting angle (25x25x5mm) and flushnut on peripheral wall as per machine configuration & load with adequate service access as per direction of eic, supplying and fixing 415 v four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection (a) 160 amp fp mccb (make legrand/crabtree/siemens/l&t/ abb as approved by e.i.c) [d-8/10], supplying and fixing 240/415 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection (make legrand/crabtree/siemens/l&t/abb as approved by e.i.c) [d-6/7] (a) 6-32 amp tp mcb, distribution wiring in 1.1 kv single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) in 20mm size pvc rigid conduit fr (precision make) incl. necy. fittings as required[e-14] i) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ecc [e-14/ 1(a)(iii)], s & f 3phase 9-15a , 415 v dol starter (make-l & t ,cat no. ss94351 or equivalent model of abb/siemens as per dierction of e.i.c) to be fixed on wall with all fixing accessories complete as