Latest bracket tube Tenders | Government bracket tube Tenders

State Government

CTN :39996366

06 May, 2025 3.45 Crore

Kanchrapara - West Bengal

Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of control cables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o

State Government

CTN :40009183

08 May, 2025 40.00 Lacs

Rewa - Madhya Pradesh

Tender For supply of jail factory raw material and other material in central jail rewa m.p.-, plastic cans thick/thin(nail size), birchi various sizes, thinner (in one litre pack), shell super, chander super, ply 19 mm (48), ply 12 mm (48), ply 06 mm (48), sunmaika (48), fevicol (in one/two kg. pack), white/yellow/red clay, turpentine oil (in one litre pack), paints various types (in one litre pack), iron hinges (in various sizes), carpenter pencil, triangular file 4, triangular file of big saw 8, screw steel (all sizes in pack of 100), foam 04 inch 32 density (3x6) 100 mm, foam 02 inch 32 density (3x6) 50 mm, foam 01 inch 32 density (3x6) 25 mm, reggine all colors, udfin yellow (01 liter pack), acacia wood shavings, wood shavings sarai, revolving chair wheel gutka, solution (01 liter pack), silli stone, cobbler nail small / big, velvet cloth all types, safeda / asian putty, electric oil, building rod 8,10 no., plain iron rod 2, 3 threads, iron repeat different size, iron strip 1 inch wide 1 thread thick, gi sheet 24 gauge, gi wire thick / thin, carbite, iron black sheet 12 gauge and 14 gauge, yellow wax, cloth paper 60 no., 80 no., 120 no., muslin cloth, panel pins ( all sizes), sheet box hooks, sheet box handles, painting brushes all sizes, iron m.s. pipes all sizes, flexible ply 6mm (8x4) water proof, iron cutter blade big, iron cutter blade small, turkey amber, iron/wood primer, kandul iron pipe 1, mangering tape 03 meter, steel long hinges 06 feet, steel chair pipe knots, mosquito net, plastic handle, aldroff, runda machine cutter blade, levenation board (18 mm), section (b) weaving industry, alum, rock salt, colours all types (fixed), canvas strip 4, fine belt a 82, tarvay steel powerloom 13, powerloom mental comb 36 no. x 72, fine belt a 102, b-37, b-43, shovel 72 x 20, fine belt a 94 & a 120, grease servo super (01 kg pack), movioil servosuper 15 w40 (20 liter pack), section (c) sewing industry, white thread terrycot (800 meter), measure, cow leaf, shuttle (small machine), top rod, cow, plate, white button transparate (1000 pack), bobbin hair, tailor inch tape, tailor chalk (10 piece pack), machine oil (1 liter pack), hand needle 7 no. (steel), machine needle 18, 21 no., inter lock needle, lavlvi, press buckram, section (d) printing press industry, white paper (1727) 57 gsm, white paper (1822) 57 gsm, ledger paper (1727) 80 gsm, brown paper (3646) 36 kg, plastic master 110 micron, universal vase (05 liter pack), font concentrate (05 liter pack), offset jobbing black ink (01 kg pack), winding cloth, winding thread 6/20, refined flour, arrowroot, i.pari sheet (2228) 300 gsm (mpr paper), colored card sheet (2228) 210 gsm, blue vitriol, straw board yellow/white (all in ounces), ruled paper (1626) 57 gsm., offset sponge, rin supreme soap (pack of 250 gm), twine, cover paper (2336) 110 gsm., answer sheet ruled paper (1822) 57 gsm., roller cloth 90 no., roller cloth 160 no., blanket (2123), coloured card sheet (2228) 180 gsm., coated card sheet (2228) 200 gsm., cover paper (2030) 110 gsm., colour paper (1822) 54 gsm., chit paper (2030), stapler pins 24 nos., one side coated card sheet (2228) 180 gsm, numbering machine

Central Government/Public Sector

CTN :40025422

12 May, 2025 NA

Bangalore - Karnataka

Tender For supply of supply of networking item - 1 inch hdpe pipe , supply of 12 core multimode outdoor armoured fiber , supply of 24 core multimode outdoor armoured fiber , supply of fully loaded liu pigtails , supply of jpu fully loaded , 24 port cat 6 utp jackpanel , supply of cat 6 single information outlets with backbox and shuttered face plate commscope , supply of cat 6 dual information outlets with backbox and shuttered face plate commscope , supply of cat 6 shield metal field keystone jack commscope amp molex systimax panduit , supply of cat 6 shield metal field rj45 plug commscope amp molex systimax panduit , supply of cat 6 utp patch cord 1 meter red green commscope amp molex systimax panduit , supply of cat 6 utp patch cord 2 meter red green commscope amp molex systimax panduit , supply of cat 6 utp patch cord 3 meter red green commscope amp molex systimax panduit , supply of modular concealed gi metal box , supply of 1 inch pvc flexible pipe with accessories , supply of 1.5 inch pvc flexible pipe with accessories , supply of 2 inch pvc flexible pipe with accessories , supply of cat 6 utp cale box 305 meter commscope amp molex systimax panduit , supply of 1 inch conduit pipe , supply of 1.5 inch conduit pipe , supply of 1 inch casing and cappinng , supply of 1.5 inch casing and cappinng , supply of 2 inch casing and cappinng , supply of 2 inch gi pipe , supply of 1 inch ms pipe , supply of 6 2 inch raceway casing white , supply of 4 2 inch pvc casing white , supply of 2 2 inch pvc casing white , supply of 9 u wall rack with pdu and accessories , supply of 15 u wall rack with pdu and accessories , supply of 27 u floor mounting rack 800x800 with pdu and accessories , ofc laying with hdpe pipe with digging soft soil and refilling 3 feet x 1 feet approx , ofc laying with hdpe pipe with clamping required material clamping nail etc .should be provided by the vendor 3 feet x 1 feet approx , ofc laying with hdpe pipe through hdd , consruction supply and installation of cement chambers with covers 2.5ftx2.5ftx2.5ft , supply and fixing of ofc route markers stone , installation of liu , splicing and testing of pigtails , installation of utp jack pannel , laying of utp cable per meter , groove cutting in walls floors and fixing pvc 1 1.5 inch pipes , groove cutting in walls floors and fixing of modular concealated gi metal box metal box covering them , termination of i o box and fixing of face plate , laying of 1in conduit pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 1.5in conduit pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 1 incasing and cappinng required material screw gatta bend collar junction box should be provided by the vendor , laying of 1.5in casing and capping required material screw gatta bend collar junction box should be provided by the vendor , laying of 2in casing and capping required material screw gatta bend collar junction box should be provided by the vendor , laying of 2in gi pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 6 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , laying of 4 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , laying of 2 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , ofc outdoor 12core splicing kit with necessary consumables and enclosure , ofc otdr test per core bid details/ 2 / 43 charges with report , network and server support deploying of 5 service engineers

State Government

CTN :40015266

23 Apr, 2025 4.98 Lacs

Multi City - Telangana

Tender For ktps-v-cam-transportation of material, t and p, ms erw pipes, various scrap material, ash, coal, silt and debris etc by engaging tractor (including carrier) from section store to ash pond / internal transportation from one spot to another spot at ash pond and inside plant premises as and when required as per the directions of in charge engineer at site, during the period from 01-04-2025 (or from actual date of utilization) to 31 -03 - 2026-reg.

State Government

CTN :40015262

30 Apr, 2025 NA

Bhadradri Kothagudem - Telangana

Tender For supply of ms erw pipes for unit-9 overhaul

CTN :40037186

21 Apr, 2025 NA

Hyderabad-T - Telangana

Tender For procurement of ms gi - nipple pipes & ss valves for khaocp, bpa.- reg.

CTN :40028691

15 Apr, 2025 29.17 Lacs

Mandamarri - Telangana

Tender For diversion of existing pipelines 450mm di, 250mm hdpe, 200mm ms and 100mm gi pipes besides national highway-363 for passage of coal belt, kk1 chp, mandamarri area, mancherial dist, t g

CTN :40029727

30 Apr, 2025 21.52 Lacs

Bapatla - Andhra Pradesh

Tender For supply & fixing of ms pipes and gate valves at wtp, repairs to wtp in repalle municipality . (under 15th fc grant)

CTN :39697772

24 Apr, 2025 NA

Thiruvarur - Tamil Nadu

Tender For corrigendum : supply of thrust washer , sealing ring a 10x14 , o ring 47x2 , gasket ring 14 2 18 2 , o ring 6x1 7 , o ring 13 3 2 4 , o ring 34x2 , allen screw m6x90 , washer 8 4 , o ring 11x2 7 , connector sheath , needle jet 2 72 , float needle valve w voton tip , float needle clip , jet 85 , main jet 155 , o-ring 46x3 , o ring 6 4x1 8 , o ring 57x3 , gasket ring a 16x22 , o ring 10 82x1 78 , thrust washer 12 5 21 5 1 , shim , o ring 7x2 n , gasket , o ring 5x2 , spring , stud m8x186 , stud m8x200 , combined screw m4x12 , collor cap nut m8 , spring washer 8 3 13 6 0 4 , o ring 62x1 5 , o ring 9x2 , o ring 16x5 , rotary seal , oil seal 32x52x7 , oil seal a 12x30x7 fpm , cable clamp 8 m5 , cable clamp 15m5 , clamp 59 , marking sleeve 1 , marking sleeve 2 , marking sleeve 3 , marking sleeve 4 , rubber plate , diaphragm , floats bracket , tie wrap 142x3 2 mm , screw set crankcase , pin , pin d8x20 , dowel 10 8x25 , oil seal 6x11x3 4 5 , ring half , countershunk screw m5x12 , slotted head screw m3x6 , collor nut m8 , hex nut m5 , lock washer 16 , circlip , retaining ring 52x2 , o ring 6x1 9 , o ring 19x2 , o ring 30x2 5 , o ring 5x1 5 , o ring 2 5x1 5 n , bracket , tube , diffuser , jet needle , fixation screw , sleeve , idle jet 30 , idle jet 35 , spring clip , throttle valve bid number/ & ( * ) : gem/2025/b/6050294 dated/ + : 13-03-2025 bid document/ 3 3 1 / 56