Latest brake rigging spares Tenders | Government brake rigging spares Tenders

State Government

CTN :42915120

03 Dec, 2025 90.65 Lacs

Kota - Rajasthan

Tender For - rmc to mawasa - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator machine complete wi

State Government

CTN :42966383

04 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator mach

Central Government/Public Sector

CTN :42989339

08 Dec, 2025 19.89 Lacs

Visakhapatnam - Andhra Pradesh

Tender For regular maintenance and overhauling of bowl mills of tpp boilers --, servicing of gearbox as per sl.no.1.01.01 το 1.01.04 of scope of work, servicing of worm shaft as per 1.02.01 of scope of work, replacement/reversal of worm wheel & worm shaft as per sl.no.1.04.01 of sow, repair of mechanical face seal as per 1.05.01 of scope of work, repair of skirt & scrapper as per 1.06.01 of scope of work, repair of roller assemblies as per 1.07.01 of scope of work, replacement of journal as assemblies as per 1.08.01 of scope of work, replacement of bull ring segment as per sl.no 1.09.01 of scope of work, repair of mill discharge valve as per sl.no.1.10.01 of scope of work, repair of classifier as per 1.11.01of scope of work, repair/replacement of vane wheel segment as per 1.12.01 of scope of work, repair of reject hoppers and discharge gates as per scope of work 1.13.01, repair of pf bends as per 1.14.01 of scope of work, repair of p.f.pipelines, bends etc.by welding as per 1.15.01 of scope of work, replacement of victualic coupling as per 1.16.01 of scope of work, multiport outlets repair as per sl.no.1.17.1 of scope of work, repair of orifice plates as per sl.no.1.18.01 of scope of work, bowl mill area cleaning as per scope of work sl.no.1.20.01, replacement of upper radial bearing and associated works of bowl mill as per scope of work 1.23.01 το 1.23.21, replacement of ventury assembly as per scope of work 1.24.00, replacement of feed pipe as per scope of work 1.25.00, servicing of mill reject conveyors idlers as per scope of work s.no 2.01.01 το 2.01.08, servicing of mill reject conveyors return idlers as per scope of work s.no 2.02.01 το 2.02.08, replacement of inner cone as per sow s. no 5.01.00, hard facing of bowl extension ring, vane wheel segment and separator body as per sow s. no 5.02.00, servicing of pyrite hopper power cylinder as per sow s. no 5.03.00, servicing of lube oil system as per sow s. no 5.04.00, servicing of volumetric feeder as per sow s. no 6.01.00, servicing of eddy current drive gear box as per sow s. no 6.02.00, general maintenance of boiler-6 bowl mills & lube oil system, roller setting of boiler-6 bowl mill, replacement of venturi collar of boiler-6 bowl mills, replacement/resetting of gasket of victaulic coupling or feed pipe sleeve coupling (per coupling) of boiler-6 bowl mills, servicing, replacement and setting of classifier deflector blade mechanism (per mill) of boiler-6 bowl mills, replacement & servicing of journal spring assembly (per assembly) of boiler-6 bowl mills, checking & setting of spring compression (per mill) of boiler-6 bowl mills, replacement of journal assembly (per assembly) of boiler-6 bowl mills, servicing of journal assembly with journal head liner assy (per assembly) of boiler-6 bowl mills, replacement of grinding roll and its support bracket or replacement of dirty oil from journal assy of boiler-6 bowl mills, replacement of vane wheel segment assembly/air inlet arrangement (per mill) of boiler-6 bowl mills., replacement of gear or bibby coupling half of boiler-6 bowl mills, alignment of mill & motor of boiler-6 bowl mills, servicing & replacement of lube oil pump of boiler-6 bowl mills, repl. of w.s. gland packing or replacement of cooling water hoses or pyrite hopper gate problem or alignment of lop or servicing of stuffing box de/nde of cad/had or servicing of any one valve of mill lube oil lines or mrhs air valve or air receiver tank drain tap or inspection of any one pf pipe hanger or, cleaning of any one hag or cag seat of boiler-6 bowl mills., general maintenance of gravimetric feeder of boiler-6, inspection/replacement of bearings of main tail pulley, intermediate rolls & main pulley of gravimetric feeder of boiler-6, replacement of feeder belt of gravimetric feeder of boiler-6, replacement of take up screw and screw housing of take up pulley assembly of gravimetric feeder of boiler-6, replacement of belt drive reducer of gravimetric feed

State Government

CTN :42905414

03 Dec, 2025 93.24 Lacs

Kota - Rajasthan

Tender For digod to dobari - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, dismantling of flexible pavements dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per morth specification clause 202 by mechanical means bituminous courses & granular courses, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (penetration grade/modified bitumen) binder using plastic waste providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing of aggregate and plastic waste cutting in a hotmix plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. (bitumen vg-30) (by mechnical means) waste plastic @ 8% of bitumen. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, providing and erecting typical citizens information board as per approved drawing & specification made of two ms sheet of

CTN :42955197

08 Dec, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of wheel alignment equipment (q3) , computerised wheel balancer (q3)

CTN :42933123

06 Dec, 2025 NA

Bangalore - Karnataka

Tender For supply of repair of mt vehicle e e - hub greasing complete , ignition switch , fuse box , brake light switch , all wiring checkup and electrician labor charges , welding work , fog light switch , electrical wire half roll , tail lamp bulb , insulation tape , mechanical labor charges , alternator main wire change dashboard meter wire change and rectification electrical problems , oil filter , engine mounting pad , ac belt , air filter , labour charges , gasket , clip , oil drain plug , oil filter assembly , wheel balancing , wheel alignment , electrician labor charges for repairing all broken electrical wires , mechanical labor charges for the removal of old items fitment of new spare parts

CTN :42936374

08 Dec, 2025 NA

Jodhpur - Rajasthan

Tender For repair maint of maruti ertiga ba no 25b 143293k - parts of vehicle to be replaced , coolant , engine oil 05w40 make mobil , air filter , wiper blade , oil filter , name plate cover , fuel filter , maintenance and labour work required , wheel alignment and wheel balancing , complete greasing

CTN :42936408

08 Dec, 2025 NA

Jodhpur - Rajasthan

Tender For supply of repair maruti ertiga ba no 23b 139467k - parts of vehicle to be replaced , gear oil 80w90 make mobil , coolant , engine oil 05w40 make mobil , air filter , oil filter , fuel filter , maintenance and labour work required , wheel alignment and wheel balancing , complete greasing , brake bleeding , servicing complete

CTN :42895124

03 Dec, 2025 NA

Amritsar - Punjab

Tender For supply of tata safari fuel pipe repair e e--tata safari fuel pipe repair , tata safari egr repair , tata safari valve grinding , tata safari wheel alignment , tata safari van pipe repair

CTN :42900871

04 Dec, 2025 NA

Sonitpur - Assam

Tender For supply of repair of royal enfield - repair of royal enfield bullet , engine oil , air filter , clutch plate , throttle cable , oil seal for gear box , horn speaker , repairing of back shoker , plug , complete electrical rewiring for battery connecting head light arrow indicator switch assembly etc as directed by engr in charge , servicing of carborator , air hose pipe , engine oil filter , repair of front shock absorber , chain and socket kit , repair serving of wheel replacement of bearing brush and greasing and wheel alignment as directed engr in charge

Brake Rigging Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government