Latest brake support Tenders | Government brake support Tenders

corporations/Associations/Others

CTN :41008377

10 Jul, 2025 NA

Indore - Madhya Pradesh

Tender For auction sale of scrap sheared body scrap(l),scrap radiator and condenser with piping,scrap defaced engine (4w),scrap catalytic converter empty,scrap door with bonnet & boot trunk with glass and plastic,scrap glass,scrap tyres with and without rim (4w),scrap battery bulk (pcb category),scrap sheared body scrap (h),scrap wiring harness,scrap automotive seats,scrap fabric,scrap chassis scrap,scrap compressor,scrap alternator/ starter,scrap rubber-pcb category,scrap plastic (pcb category),scrap mix steel with dead axle, fuel tank etc,scrap brake booster w/o cylinder,scrap motor,scrap tyres with and without rim (2w),defaced engine scrap (2w)

Central Government And Public Sector

CTN :40978118

29 Jul, 2025 NA

Surat - Gujarat

Tender For supply of swagelok make model no. ss-1rs6mm needle valve integral-bonnet ss316 body 6 mm od end connections , swagelok make model no. ss-1rs10mm needle valve integral-bonnet ss316 body 10 mm od end connections , swagelok make model no. ss-1rs12mm needle valve integral-bonnet ss316 body 12 mm od end connections

CTN :40974712

15 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of spring washer (p-22) , locking washer (plate no-7) , fibre washer , fibre washer , nut for adjusting rod (p-14) , sealinf ring for 14 & 19 , slotted nut (p-26) , rivet flat hd (p-07) , rivets , rivet flat head (p-14) , grease nipple (plate no-7) , lock nut (plate no-7) , cotter pin , pin for leve , link lever (ctlg fig-03) , clamp , copper washer , set screw (fig-i) , gasket exhaust manifold , key for coupling (plate no-4) , grease nipple (p-09) , locking wire (fig-i) , stud , union (p-04) , union , nut (p-15) , rock stud (plate no-7) , stud (fig-i) , stud (fig-i) , pin for die (plate no-7) , clutch spring , oil lubricator (plate no-4) , clutch opening die (plate no-7) , step bolt (p-16) , joint , water inlet manifold to cylinder head , joint end , drain plug (plate no-14) , joint , venturi to induction mainfold(ms-202) , drain plug , bonnet clips (plate no-2) , thrust washer (plate no-3) , stud cyl block , thrust washer (p-14) , cap , inlet and exhaust valve(ms-192) , joint exhaust manifold outlet flange(ms-196) , gland , fuel tap , die , heater switch (p-20) , hose connection , fixing pin (plate no-4) , spring for adjusting rod(p-14) , pad oil filter element(ms-175) , oil seal housing (plate no-4) , dust excluder (plate no-3) , fork operating spindle (plate no-7) , stud , gland for cock , fuel filter (p-21) , adjusting rod (p-14) , joint for hanger , pin for die & split pin , dog , spring inlet and exhaust valve outer(ms-190) , clamping stud with nut(fig-i) , locking nut (fig-i) , filter cap (plate no-14) , oil pressure gauge(p-20) , joint , outer clamping plate (plate no-10) , pin for pivot bracket(p-17) , driving belt , plate driving(facing in 3 segment) , belt water pump , pin for coupling (plate no-4) , oil pressure meter (plate no-14) , rubber coupling (plate no-4) , fulcrum pin (p-15) , bush for clutch plate (fig-i) , distance end piece (fig-i) , coupling block (plate no-4) , shim set (fig-i) , bearing (fig-i) , top bush (plate no-3) , ball brg , worm case cover (plate no-4) , sealed ball bearing , selector lever(p-15) , split universal coupling (plate no-4) , universal coupling (plate no-4) , flexible hose , bearing (plate no-4) , bush for clutch operator (fig-i) , collar assy (ctlg fig-03) , backrest(plate no-18) , bottom cushion (plate no-18) , side clutch operating (plate no-10) , clutch operating fork (plate no-7) , clutch lining set (fig-i) , reverse clutch plate (plate no-10) , forward clutch plate (plate no-10) , 2nd inter shaft (fig-h) , forward clutch plate assy , brake ferodo (p-14) , housing cover r.h for 3rd inner shaft , spindle for steering (plate no-4) , ferode lining , clutch lining , bevel wheel , bearing (fig-i) , bearing cover rh for 3rd inner shaft , coupling shaft , bearing (fig-i) , main bearing housing (fig-i) , driving disct , pinion 1st and 3rd speed (fig-h) , pinion 3rd & 4th speed(30 teeth(fig-h) , pivot (plate no-3) , brake strap assy , rear foot plate

CTN :40975616

15 Jul, 2025 NA

Doda - Jammu And Kashmir

Tender For supply of eme sp d d - brake pad , front filter , bonnet cable , bonnet shocker , brake fluid dot 4

CTN :41003265

18 Jul, 2025 NA

Dimapur - Nagaland

Tender For supply of rotary pump 505 , l t wire 1 5mm , convoy light , spring front buffer , speedometer cable , speedometer assy , oil filter , sparking plug head , air pressor horn relay , door handle inner , door palta , door button , air cleaner hose , air cleaner filter inner outer , mud flap , gear lever dust boat , bonnet lock , bonnet cable , trailor control valve , dash board cover , door handle , door hinge , door hinge rear , 4x4 cable , benjo union , handle , dual brake valve , bulb 12v , tail light assy , solonid motor generator , tash board inner outer , gasket , hose , carburator adapator , spark plug , spring returning , air filter element , chain sprocket kit , brake shoe spring , spark plug h h , sprocket drive , brake shoe , eng mounting , fuel hose 14x14 nut 12 , fuel hose 14x14 nut 24 , vrc cable , dust cover , gear lever kit , startor motor , dash board cover tata , dash board lock , door knob , cylinder head , dash board light , wiper linkage , engine mounting , door hinges ) /bid number : gem/2025/b/6400338 * /dated: 08-07-2025 & & / bid document 1 / 42

CTN :40785044

15 Jul, 2025 90.00 Lacs

Hisar - Haryana

Tender For corrigendum : supply of surgical consumable items - bacterial filter, bubble cpap circuit with peep generator (bubbler), bubble cpap infant bonnet of different sizes for neonates, bubble cpap mask of different sizes for neonates, bubble cpap mini flow of different sizes for neonates, bubble cpap nasal prong of different sizes for neonates, bubble cpap patient interface kit with different sizes mask and prong, nasal canulla, cap, miniflow, midline nasal tubing, cpap boussicnac mask, hfnc machine circuit disposable compatible to fisher paykel, hfnc paediatric circuit inspired 02 flow, hme filter, jackson rees circuit (peaditrics), neonatal dual heated vantilator circuit with humidifier chamber for sle 5000 ventilator, nrm (high) mask, patient interface for cpap (kit) containing different size of mask nasal cannula cap with mini flow, silicon face mask 4 no. with boring, silicon face mask 5 no. with boring, silicon face mask 6 no. with boring, veltilating bag, ventilator circuit neonantal (sle-5000), ventilator circuit single limb trilogy evo-300 (philips) adult, ventilator circuit single limb with proxima line for (respironics-v-680) philips, ventilator circuit with double water trap (aeonmed), ventilator circuit with double water trap drager, ventilator circuit with double water trap meditec england allied, ventilator circuit with double water trap with flow sensor (bel), ventilator circuit with double water trap with proxima line size adult mak for (respironics-v-680) philips, ventilator circuit with double water trap with proxima line size adult mak for (triology ev-300) philips, venturi mask

CTN :40439615

11 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of 2 way switching service ball valve 1 by 4 inch , needle valves screwed bonnet , pressure gauges with 1 by 4 od , pressure gauges with 1by 4 od , quick disconnect with double shut off , flexible braided hose , sample cylinder with seamless design

CTN :40816145

15 Jul, 2025 3.96 Lacs

Murshidabad - West Bengal

Tender For corrigendum : procurement of bonnet seal ring for various types of high pressure for stage -i, sgtpp.

CTN :40963109

14 Jul, 2025 50.0 Thousand

Faridkot - Punjab

Tender For supply of water pump , gasket , door handle , lh lock , rh lock , coil ignition , accelerator cable , bonnet shocker

Corporations/Associations/Others

CTN :40955745

18 Jul, 2025 12.66 Lacs

Multi City - Karnataka

Tender For supplying of water supply materials for yearly tender of the year of 2025-26 - extra blade (size 24x2x0.100) (rate as per market rate)bkr, teflon tape (tape size 12 mm x 10 mtr) (rate as per market rate)bkr, solvent cement (rate as per market rate)bkr, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and valves and provision for corresponding dia ms flanges etc. complete for sluice valve of pn -10.0 and 80mm (item no. 2.23.2 page no. 22 volum-5 pwd sr-2023-24)bkr, size 80 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, size 65 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply and delivery at site of brand new best make non-return valve as per is 778/1984 with isi mark and as per its latest amendments size 50 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni, outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 indoor type note 1) dol- direct online starter 2) s-d- star delta starter etc. complete. for outdoor 3 to 6 hp pumps (item no. 13.24.2 page no. 155 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni with phase selector switch, isolating switch outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 no. electrcal protection like single phase preventor. upto 3 hp pumps (item no. 13.23.1 page no. 154 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 135 lpm at 110 m equl 12 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 155 lpm at 84 m equl 10 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000, 3phase, ss bowl and impeller with low volt motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. for 3 hp etc. complete 6.50 hp - 245 lpm at 70 m equl 8 stg outlet dia - 2.50 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete 2.00 hp/1.5kw 20 stg (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24) bkr, supply of isi mark 175mm nominal bore, plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to is 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends. isi marking weighing 25.10kg/m.prices include collar-medium duty. (item no. 12.32 page no. 134 volum-5 pwd sr-2023-24)bkr, for 150 mm dia gi tee (item no. 11.9.11 page no. 130 volum-5 pwd sr-2023-24)bkr, for 125 mm dia gi tee (item no. 11.9.10 page no. 130 volum-5 pwd sr-2023-24)bkr, for 100 mm dia gi tee (item no. 11.9.9 page no. 130 volum-5 pwd sr-2023-24)bkr, for 80 mm dia gi tee (item no. 11.9.8 page no. 130 volum-5 pwd sr-2023-24)bkr, for 65 mm dia gi tee (item no. 11.9.7 page no. 130 volum-5 pwd sr-2023-24)bkr, for 50 mm dia gi socket (item no. 11.9.6 page no. 130 volum-5 pwd sr-2023-24)bkr, for 40 mm dia gi tee (item no. 11.9.5 page no. 130

Brake Support Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

Corporations/Associations/Others