Latest brake system Tenders | Government brake system Tenders

Central Government/Public Sector

CTN :39587508

17 Mar, 2025 NA

Multi City - Multi State

Tender For supply of connecting lever assly. to m/s. escorts drg. no. 3kb 4325( consisting of 07 items) of m/s escorts make parking brake system of emus/memus , m/s escorts drg./pt.no. and qty. required per set are mentioned as follows;-1) desc.- lever-m/s escorts drg./pt. no.- 3 kb 4322-qty./set- 1 no. 2) lever arm- 4 kb 4323- 2 nos. 3) pin- 4 kb 4324- 1 no. 4) link- 4 kb 4321- 2 nos. 5) split pin 5 x 32- is: 549 - 4 nos. 6) plain washer 22 - is: 2016 - 6 nos. 7) pin - 4 kb 4374- 1 no. escorts drg. no. 3kb4325 spec: escorts drg. no. 3kb4325.

Central Government / Public Sector

CTN :39586133

14 Mar, 2025 NA

Waltair - Andhra Pradesh

Tender For retro fitment of twin pipe brake system in wagons during periodical over hauling repairs at wagon repair workshop/vadlapudi,for a period of one year

Central Government / Public Sector

CTN :39589133

02 Apr, 2025 NA

Multi City - Multi State

Tender For supply of set of spares for bogie mounted brake system for boxhnl wagons

CTN :39587524

04 Apr, 2025 NA

Multi City - Multi State

Tender For supply of pressure switch assembly for e70 brake system

CTN :39587743

19 Mar, 2025 NA

Multi City - Multi State

Tender For supply of release run magnet valve special repair 3282 for tri-plate panel mounted irab-9/irab-10 brake system to sil's drg. no. 29195802 or similar for electric locos. make/brand - rotex.

CTN :39588076

14 Apr, 2025 NA

Multi City - Multi State

Tender For supply of control card module assembly for e-70 brake system

CTN :39557280

14 Mar, 2025 6.00 Lacs

Bikaner - Rajasthan

Tender For supply of vocation educaton lab item- automotive- vernier caliper digital, exte rnal micrometer, digita l)range, exte:rnal micrometer, range(manual), internal microrrd!ter, range(digital), dial gauge (metric, system)with magne, stand plunger type , telescopic gauge set, bor~uge +, feeler gauge metric , straight edge , divider , inside caliper , outside caliper , torque wrench set of 3 , digital multi meter , hydrometer , depth gauge range , bevel gauge , battery charger , tyre pressure gauge (hand held, digital) , hydrolic jack (trolley , type) , maintenance tools , fasteners :- , bolts gr 8, gr 5, gr 2 , nuts , studs, screws, washers ., roll-pins/spring-pins, c clips, general purpose tools, double ended spanner, set, ring spanner set, socket spanner set with, 20 sockets, t- handle, extension rod, extension rod, ratchet h;mdle, rotating union, side cutting plier, , round nose plier, fl a~ nose plier, ball peen hammer with, handle, cross peen hammer, with handle, screw driver, screw driver, phillips screw driver, philiips sc'aw driver, ' hacksaw frame fixed", hacksaw blades, cold chisel flat, . allen key set, oil cane, file flat bastard, . ~ilo $qutlrc rough, file flat s th 2nd cut, file rasp cut , emery paper/cloth , chassie frame (lmv) (old) diesel , cut model of any engine (mpfi) old, motorized , live axle assly with differential & final drive / cut model of same, mounted on stand , dead axle assly with stub axle mounted on stand , components of suspension system , cut model of shock absorber , components of steering system (at least each, one) mounted on stand , air brake system with compressor , mechanical brake assembly , hydraulic brake assembly , components of automobile electrical system (at least each one) mounted on a board. , different coloured automobile cables , cooling system , components (mounted on a board) , lubrication system components , compressor (in working condition) , gearbox (old) and clutch assembly. cut section , fuse , some other item , required , projector with screen , working bench , bench vice , table for instructor , chair for instructor , almirah steel , hand grinder 5 , grace gur , mallet hammer , screw gauge , center punch , automotive puncture , repair kit , alignment gauge (manual) , first aid kit , fire extinguisher

CTN :39557285

14 Mar, 2025 60.00 Lacs

Bikaner - Rajasthan

Tender For supply of vocation educaton lab item- automotive- vernier caliper digital, exte rnal micrometer, digita l)range, exte:rnal micrometer, range(manual), internal microrrd!ter, range(digital), dial gauge (metric, system)with magne, stand plunger type , telescopic gauge set, bor~uge +, feeler gauge metric , straight edge , divider , inside caliper , outside caliper , torque wrench set of 3 , digital multi meter , hydrometer , depth gauge range , bevel gauge , battery charger , tyre pressure gauge (hand held, digital) , hydrolic jack (trolley , type) , maintenance tools , fasteners :- , bolts gr 8, gr 5, gr 2 , nuts , studs, screws, washers ., roll-pins/spring-pins, c clips, general purpose tools, double ended spanner, set, ring spanner set, socket spanner set with, 20 sockets, t- handle, extension rod, extension rod, ratchet h;mdle, rotating union, side cutting plier, , round nose plier, fl a~ nose plier, ball peen hammer with, handle, cross peen hammer, with handle, screw driver, screw driver, phillips screw driver, philiips sc'aw driver, ' hacksaw frame fixed", hacksaw blades, cold chisel flat, . allen key set, oil cane, file flat bastard, . ~ilo $qutlrc rough, file flat s th 2nd cut, file rasp cut , emery paper/cloth , chassie frame (lmv) (old) diesel , cut model of any engine (mpfi) old, motorized , live axle assly with differential & final drive / cut model of same, mounted on stand , dead axle assly with stub axle mounted on stand , components of suspension system , cut model of shock absorber , components of steering system (at least each, one) mounted on stand , air brake system with compressor , mechanical brake assembly , hydraulic brake assembly , components of automobile electrical system (at least each one) mounted on a board. , different coloured automobile cables , cooling system , components (mounted on a board) , lubrication system components , compressor (in working condition) , gearbox (old) and clutch assembly. cut section , fuse , some other item , required , projector with screen , working bench , bench vice , table for instructor , chair for instructor , almirah steel , hand grinder 5 , grace gur , mallet hammer , screw gauge , center punch , automotive puncture , repair kit , alignment gauge (manual) , first aid kit , fire extinguisher

CTN :39557288

14 Mar, 2025 6.00 Lacs

Bikaner - Rajasthan

Tender For supply of vocation educaton lab item- automotive - vernier caliper digital, exte rnal micrometer, digita l)range, exte:rnal micrometer, range(manual), internal microrrd!ter, range(digital), dial gauge (metric, system)with magne, stand plunger type , telescopic gauge set, bor~uge +, feeler gauge metric , straight edge , divider , inside caliper , outside caliper , torque wrench set of 3 , digital multi meter , hydrometer , depth gauge range , bevel gauge , battery charger , tyre pressure gauge (hand held, digital) , hydrolic jack (trolley , type) , maintenance tools , fasteners :- , bolts gr 8, gr 5, gr 2 , nuts , studs, screws, washers ., roll-pins/spring-pins, c clips, general purpose tools, double ended spanner, set, ring spanner set, socket spanner set with, 20 sockets, t- handle, extension rod, extension rod, ratchet h;mdle, rotating union, side cutting plier, , round nose plier, fl a~ nose plier, ball peen hammer with, handle, cross peen hammer, with handle, screw driver, screw driver, phillips screw driver, philiips sc'aw driver, ' hacksaw frame fixed", hacksaw blades, cold chisel flat, . allen key set, oil cane, file flat bastard, . ~ilo $qutlrc rough, file flat s th 2nd cut, file rasp cut , emery paper/cloth , chassie frame (lmv) (old) diesel , cut model of any engine (mpfi) old, motorized , live axle assly with differential & final drive / cut model of same, mounted on stand , dead axle assly with stub axle mounted on stand , components of suspension system , cut model of shock absorber , components of steering system (at least each, one) mounted on stand , air brake system with compressor , mechanical brake assembly , hydraulic brake assembly , components of automobile electrical system (at least each one) mounted on a board. , different coloured automobile cables , cooling system , components (mounted on a board) , lubrication system components , compressor (in working condition) , gearbox (old) and clutch assembly. cut section , fuse , some other item , required , projector with screen , working bench , bench vice , table for instructor , chair for instructor , almirah steel , hand grinder 5 , grace gur , mallet hammer , screw gauge , center punch , automotive puncture , repair kit , alignment gauge (manual) , first aid kit , fire extinguisher

CTN :39557289

14 Mar, 2025 1.00 Lacs

Bikaner - Rajasthan

Tender For supply of vocation educaton lab item- retail dhermas- vernier caliper digital, exte rnal micrometer, digita l)range, exte:rnal micrometer, range(manual), internal microrrd!ter, range(digital), dial gauge (metric, system)with magne, stand plunger type , telescopic gauge set, bor~uge +, feeler gauge metric , straight edge , divider , inside caliper , outside caliper , torque wrench set of 3 , digital multi meter , hydrometer , depth gauge range , bevel gauge , battery charger , tyre pressure gauge (hand held, digital) , hydrolic jack (trolley , type) , maintenance tools , fasteners :- , bolts gr 8, gr 5, gr 2 , nuts , studs, screws, washers ., roll-pins/spring-pins, c clips, general purpose tools, double ended spanner, set, ring spanner set, socket spanner set with, 20 sockets, t- handle, extension rod, extension rod, ratchet h;mdle, rotating union, side cutting plier, , round nose plier, fl a~ nose plier, ball peen hammer with, handle, cross peen hammer, with handle, screw driver, screw driver, phillips screw driver, philiips sc'aw driver, ' hacksaw frame fixed", hacksaw blades, cold chisel flat, . allen key set, oil cane, file flat bastard, . ~ilo $qutlrc rough, file flat s th 2nd cut, file rasp cut , emery paper/cloth , chassie frame (lmv) (old) diesel , cut model of any engine (mpfi) old, motorized , live axle assly with differential & final drive / cut model of same, mounted on stand , dead axle assly with stub axle mounted on stand , components of suspension system , cut model of shock absorber , components of steering system (at least each, one) mounted on stand , air brake system with compressor , mechanical brake assembly , hydraulic brake assembly , components of automobile electrical system (at least each one) mounted on a board. , different coloured automobile cables , cooling system , components (mounted on a board) , lubrication system components , compressor (in working condition) , gearbox (old) and clutch assembly. cut section , fuse , some other item , required , projector with screen , working bench , bench vice , table for instructor , chair for instructor , almirah steel , hand grinder 5 , grace gur , mallet hammer , screw gauge , center punch , automotive puncture , repair kit , alignment gauge (manual) , first aid kit , fire extinguisher

Brake System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector