Latest brass bar Tenders | Government brass bar Tenders

CTN :41797551

03 Oct, 2025 NA

Khammam-T - Telangana

Tender For supply of screen bar 38mm drawing no 400 211 33 make elecon , screen bar 50mm drawing no 400 211 34 make elecon , frame side piece hopper part no 400 209 13 set of 2 nos 1 thus and 1 opposite make make elecon , frame side piece upper part no 400 209 14 set of 2 nos 1 thus and 1 opposite make make elecon , washer locking part no 400 209 46 make elecon , brass plug drawing no 400 209 47 make elecon , frame side liner set of 2 part no m01021slash 3 make elecon , frame side piece liner plate part no m01 002 slash 4 thus make elecon , frame side piece liner plate part no m01 002 slash 4 0pp make elecon , fluid coupling type cdr 584 make elecon

CTN :41799657

22 Sep, 2025 NA

Kangra - Himachal Pradesh

Tender For supply of lv7 itr beml 5306-004719 50-151 eye bolt for draw bar , lv7 itr beml 2530-004623 50-82 dust shield lot 1 , lv7 itr beml 2510-000655 cover assy , lv7 itr beml 50-474 locking plate 60 x 32 lot 1 to 4 , lv7 itr beml 50-173 hand brake wheel lot 2 to 4 , lv7 itr beml 6220-000052 1 light unit tail light b 80 n , lv7 itr beml 2530-002539 cover wheel hub cast iron lot 1 2 3 and 4 , lv7 av-15 574-713-009-000 limit switch do 500339 , k9 bmp nbc 675-71-225 oh-4357 gasket , lv7 krz 238-1601131 driven disc

Central Government/Public Sector

CTN :41795558

18 Sep, 2025 99.5 Thousand

Siliguri - West Bengal

Tender For supplying and fixing of electrical fitments for newly constructed toilet of d coy barrack and new jamin toilet at stc bsf of north bengal electrical installation - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size m.s. box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required. group b, rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. group b, wiring for circuit/ submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire., wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.2 x 4 sq. mm + 1 x 4 sq. mm earth wire. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire., supplying and fixing 3 pin 5 amps ceiling rose on the existing junction box/ wooden block including connection etc. as required. 3 pin 5 amp, supplying and fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. size : 180mm x 100mm x 60mm deep., supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator). 8 way , double door., supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c"curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole., supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c"curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.single pole and neutralsingle pole and neutral., earthing with g.i. earth pipe of following size including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 4.5 metre long, 40 mm dia ., supplying and laying following size g.i. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with gi thimble etc. as required.6 swg., supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted /welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. standard make., add applicable rate of gst @18% in place of 12% (0.0633mf) on dsr item. s no.(1 to 12), add 1% labour cess on s no. (1 to 12) + s no.13, modified estimate cost after using correction factor on account of gst @ 0.973 on dsr items s no. (1 to 12) + s no.13 + s no.14, supplying and fixing 3 mm thick phenolic laminated sheet cover in front of ms switch box including making hole and al. alloy/ cadmium plated iron screws, 20 mm, washers etc. as required.hylem/formica/anchor/as approved by engg incharge., supplying and fixing of 6 watt surface type trim cosmo panel square shape led light suitable for 240 volt, single phase, 50

Central Government/Public Sector

CTN :41519332

18 Sep, 2025 98.52 Lacs

Korba - Chhattisgarh

Tender For corrigendum : supply of sprocket hd, part no. - bd1000cf303 , cutting bit, part no. - bd1000fb508 , cutting bit holder, part no. - bd1000fb509 , scraper bar hd, part no. - bd1000fb601 , rotating bush housing mounting bolts, part no. - bd1000fb505 , fly wheel, part no. - bd1000fb506 , locking assembly, part no. - bd1000fb507 , tail shaft assembly with sprocket, part no. - bd1000fb401 , flexible element for flexible coupling, part no. - bd1000cf605 , chain tension bolt assembly with frame, part no. - bd1000fb407 , scraper chain, part no. - bd1000fb602

Central Government/Public Sector

CTN :41778475

25 Sep, 2025 NA

Porbandar - Gujarat

Tender For supply of yard materials : : - ss locking latch hosp 3 inch , csk screw 16x6mm , csk screw 13x8mm , csk screw 13x6mm , wooden drill bit , l clamp 1 inch , ss round rod 16mm , ss flat bar 308g1 , ms flat bar 1x10mm , marine ply wood 8x4 feet 8mm , marine ply wood 8x4 feet 12mm , marine ply wood 8x4 feet 18 mm , concrete nails 2 inch , concrete nails 1 inch , self drilling screw 2 inch , self drilling screw 1 inch , ss hinges 2 inch , ss locking latch hosp 4 inch

CTN :41519825

15 Sep, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of ball bearing 60032rs1 , fitied sealing piston ball valve a type nd80 18rt000c0242 , grooved pin 3x12 a1 , grooved pin 4x16 a1 , grooved pin 4x20 a1 , lip seal for non return valve od 17 15 49cr000c0061 , lip seal 39x60x821a7 , lock washer , nord lock washer nd5 steel , nord lock washer nd4 steel , nrv with od17 15 ruch fitting for hp air circuit , o ring 6 90x1 8020a8 , o ring 109 00x5 3020a8 , o ring12 00x2 0020a8 , o ring 132 72x6 9920a8 , o ring 15 00x2 6520a8 , o ring 15 10x2 7020a8 , o ring 20 00x2 0020a8 , o ring 20 00x2 6520a8an , o ring 30 80x3 6020a8 , o ring31 42x2 6220a8 , o ring 47 50x2 6520a8 , o ring 59 99x2 6220a8 , o ring 60 00x2 6520a8 , o ring 66 04x5 3320a8 , pin , pin v1x16 stain less steel , pin v2 28 stain less steel , pin v1 20 stain less steel , pin v3 2x32 stain less steel , ringinner i6 outer 10th 1 5teflon , ringinner 8 outer 12th 1 5teflon , ringinner 10 outer 14th 1 5teflon , ringinner 12 outer 16th 1 5teflon , ringinner 6 outer 10th 1 5teflon , valve seal , valve seal , seal for ball valve a type forged nd32 18rt000c0231 , seal for ball valve a type forged nd32 18rt000c0236 , seal 135x153x3 fibre nbr , seal , seal , sealing gasket for ball valve nd65 18rt000c0805 , spring , spring , spring , spring , spring , spring , stop guide ring , guide ring , valve eseal , valve seal , steel external snap ring 15 7x1 , grooved pin 8x55 a1 , sealing fitted piston , cusn12p washer 23x18x1 , grooved pin 2 5x9 a1 , fitted sealing piston , valve lock washer , hp air pressure reducer 8 1 bar for copper ruch circuit nd10 , hydraulic change over valve 6 way 2 position nd20 , o ring 9 50x2 6520a8 , o ring 15 08x2 62 20a8 , o ring 36 50x2 6520a8 , o ring 43 70x3 5520a8 , stop pin e36 4 , manually operated distributor nd15 4w 3p rudder gear , hydraulic changeover valve 6 way 2 position nd20 , wire sealing and lead for safety locking , grooved pin 2 5x9 a1 , fitied sealing piston ball valve a type nd125 18rt000c0249 , teflon sealing washer 30x18x1 , lattyflon sealing braid 6x6 length 500 mm , lattyflon sealing braid 8x8 length 500 mm , washer dec 5 galv steel , washer dec 6 galv steel , adjusting shim 15 , adjusting shim 16 , adjusting shim 17 , seal , peelable shim , seal , fitted sealing piston , peelable shim , peelable shim , plastic valve , lock washer , sg 10 2 auma 5 prong servomotor for valves , spring , valve seal , ring innero12 outer 16 th 1 5 teflon , sg 05 2 auma 5 prong servomotor for valves , nord lock washer nd4 steel , nord lock washer nd5 steel , flat gasket 24 5x32x2 10ac000c0135 , spring , o ring 25 00x2 6520a8an , o ring 30 00x2 6520a8an

Central Government/Public Sector

CTN :41596971

23 Sep, 2025 42.58 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & n

State Government

CTN :41731210

15 Sep, 2025 1.40 Crore

Gandhinagar - Gujarat

Tender For supplying and stacking various type of building, road & ther construction materials at various places of taluka mansa under taluka panchayat, mansa under mgnrega (annual unit rate) - cement isi mark (binani , j.k laxmi, ultratack, ambuja-53grade,etc.., supplying crushed stone aggregate(single size): 10mm nominal size, supplying crushed stone aggregate(single size): 20mm nominal size, supplying crushed stone aggregate 40mm to 63mm, supplying hand broken stone 40 to 63mm, supplying fine sand, coarse sand, stone dust, rubble (quarry) with conventional charge, tmt steel.. (all size-4,6,8,10,12 etc, tmt bar fe.415 brand ), hysd steel, binding wire, kota stone (policed) 25 mm, wall tiles / glaze tiles, vitrified tiles, wash basin, pvc water tank, indian orissa toi pan including p trap, cement sheet, ` patra g.i.sheet, 30/72 toilet door, colour (isi mark) (oil paints), colour (isi mark) (distamper,apex,imarsal,), iron pipe and angel, mixture machine rent, centing rent, shuttering ( with fitting), water tanker rent, electric light fitting material (with fitting), motor (1.5 hp stater with board), cable (1x3x4 sqm standard), murrum / binding material, white cement, board (mgnrega) with fitting, iron window & door, supplying coloured inter locking c.c. paver blockconcrete block 60mm, supplying coloured inter locking c.c. paver blockconcrete block 80 mm, ceramic tiles, wash basin white vitrious 550mm x 400mm, wash basin white vitrious 630mm x 510mm, r.c.c heavy duty non-pressure pipe i.s. class npequal to3 300mm dia., r.c.c heavy duty non-pressure pipe i.s. class npequal to3 450mm dia., r.c.c heavy duty non-pressure pipe i.s. class npequal to3 600mm dia., r.c.c heavy duty non-pressure pipe i.s. class npequal to2 300mm dia., r.c.c heavy duty non-pressure pipe i.s. class npequal to2 450mm dia., r.c.c heavy duty non-pressure pipe i.s. class npequal to2 600mm dia., vitrified granite tiles 8 mm to 10 m thick 24 x 24 size light shade, conveyance from 0.5 km tractor with trolly, conveyance from 1.0 km tractor with trolly, conveyance from 2.0 km tractor with trolly, conveyance from 3.0 km tractor with trolly

CTN :41735154

10 Sep, 2025 NA

Villupuram - Tamil Nadu

Tender For providing of work for new doors - abs door/equivalent (providing and laying)/(supply and fixing) for (3.39 sq.mtr) providing of 35mm thick factory made prelaminated abs door shutter moulded in different designs, consisting of all round frame made out of water proof solid foam pvc bar of size 20 x 32mm, reinforced by 32 x 32mm 2 nos for vertical made out of lvl, core material of 32mm thick high density craft paper honey comb board, sandwiched on both side with prelaminated abs sheet thickness of 1.5mm. pvc edge banding of size 0.45mm on the vertical sides. hardware made out of steel coated butterfly hinges 3 nos, for each shutter and isi make ss round lock with the standard specification., aluminium door (2.52 sq.mtr) for computer room fabricating, supplying and fixing in position of aluminium anodized powder coated of single leaf door with half paneled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick plain glass at top. the outer frame shall be with all box section at 2.319 kg/mtr and shutter frame made of section vertical & top rail @ 1.292 kg/m and aluminium clips:@ 0.176 kg/m, aluminium handle: 100 x 30 mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, pvc felt, handle for a length of shutter, locking arrangements, furniture fittings such as aluminium tower bolts 250 x 12mm 1 no. hydraulic door closer 1 no, lock -1 no. door stopper with rubber bush including cost of material labour charges and power charges required for fabrication including, chipping, dismantling masonry and redoing etc.

State Government

CTN :41719915

04 Sep, 2025 30.00 Lacs

Multi City - Bihar

Tender For biharsupply of machines and laboratory equipments for mechanical & civil engineering in the premises of government engineering college, kaimur - demonstrate & study of steam boilers and its mounting & accessories, to learn the mechanical properties of engineeing materials. (chart/, flex), to learn the working of steam power plant. (chart/ flex), to learn the working of vapour compression refrigeration system., (chart/ flex), to learn the working of impulse steam turbines. (cut section model), to learn the working of gas turbines. (chart/flex), to learn the working of reaction steam turbines. (cut section model), to learn the working of vapour absorption refrigeration system, hemispherical sectional models of screw threads, , standard bolt, , bolts of four types, , foundation bolts, , locking arrangement of bolts, , rivetted joints-wooden, , bush bearing, , plummer block or pedestal bearing, , foot step bearing, flexible coupling, , flanged coupling, , stuffing box, , connecting rod , spark plug, , sine bar complete set, (a) sine bar (100mm, hardened tool steel), (b) sine bar (200mm. hardened tool steel), sine centre complete set, sine centre complete set ( roller distance 200mm centre height : 65mm or roller distance 300mm, centre height 75 mm), vernier bevel protector, vernier bevel protector( blade edge angle 60 deg , 45 deg edge, blade length 150mm, ) range = 360deg, lc: min, it is capable of ), lathe tool dynamometer, x direction measuring range : 0 ± 3000 n ( 0. 1 n sensitivity ), y direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ), z direction measuring range : 0 ± 2000n ( 0.1 n sensitivity ) measurement : x, y & z direction force measurement simultancously. data recording, signal conditioner : gpds signal conditioner accuracy = ± 0.5 %, computer: window operating system, software “ i t “ lathe tool software exclusively designed and developed for measuring the forces in x. y & z direction during operation., software features are :, (a) digital display of forces, (b) graphical display of forces, (c) data recording, printing, transfer to ms excel, dimensions : sensor ( 55 x 125 x 55 mm ) 20mm x 80mm segment provided for fitting in the tool holder of lathe machine, power requirement : 220 v 1 phase, 50 hz, drill tool dynamometer, axial load capacity : 500kgf. torsional load capacity 50 kf. cm. computer: window operating system, software “ dt drilling tool software exclusively designe and developed for measuring axial & torsional forces developed during drilling operation, software features are :, (a) digital display of forces, (b) graphical display of forces, (c) data recording. printing, transfer to ms excel, vernier gear tooth caliper (0.02mm resolution, mi-26), slip gauge complete set slip gauge block set, metric, 87 or 103 block of grade 1 steel, optical flat, optical flat, l=12mm, d=45mm, 0.2um, optical flat, l=12mm, d=45mm, 0.1um, optical flat, l=15mm, d=60mm, 0.2um, optical flat, l=15mm, d=60mm, 0.1um, optical flat, l=0.5". d=1.8", 0.000008", optical flat, l=0.5". d=1.8", 0.000004", optical flat, l=0.6", d=2.4", 0.000008", optical flat, l=0.6", d=2.4", 0.000004", vernier calliper 300 mm, vernier calliper (digital) 150mm, micrometer outside 0-25mm, digital micrometer (25mm, 0.001mm resolution), journal bearing test rig, description: the apparatus consists of a plain steel shaft excavated in a bearing and directly driven by a fhp motor. the bearing is freely supported on the shaft and scaled at the motor end. the speed of the motor is controlled by the speed control uniy. manometer is mounted on bearing to measure the pressure at different position around the circumference, bearing is free and can be adjusted at any position of circular scale. the bearing can be loaded by attaching weights to the arm supported beneath it., technical details:, journal : diameter 50 mm bearing : diameter 55 mm weights : 4 weights, motor : variable speed fhp motor, control panel :

Brass Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government