Latest brass mesh scrap Tenders | Government brass mesh scrap Tenders

CTN :39958809

21 Apr, 2025 2.93 Lacs

Nadia - West Bengal

Tender For corrigendum : supply of flood fighting materials with utilisation as an when required basia under juridiction of krishnagar irrigation sub division under nadia irrigation division. - supplying nylon cage netting 1 metre x 1 metre x 1 metre size with knot having mesh size 17.5 cm x 17.5 cm constructed with nylon thread (210 x 24) having tensile strength not less than 250 kg. / sq. cm. including carriage, delivery and stacking at site inclusive of all taxes complete., supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., labour charges for dumping and placing in position properly filled in nylon crates with filled in gunny / poly cement bags (minimum 25 nos. having capacity 50 kg) with local earth or sand, sewing and tying the crate with nylon wire within a lead of 150 m. and all lifts in river slope or bed by cutting trenches upto 50 cms depth, if necessary, or by boat including cost of hire charges of boat, boatmen and other necessary equipments and also carriage and charge of filling bags with earth / sand but excluding cost of nylon crate and gunny/poly cemrnt bags as per direction of the engineer in charge. nb:- volume of each earth/ sand filled bags should not be less than 0.028 m3. size of nylon crate is 1metre x 1metre x 1metre. (a) where boats are not necessary., labour charges for dumping and placing in position properly filled in nylon crates with filled in gunny / poly cement bags (minimum 25 nos. having capacity 50 kg) with local earth or sand, sewing and tying the crate with nylon wire within a lead of 150 m. and all lifts in river slope or bed by cutting trenches upto 50 cms depth, if necessary, or by boat including cost of hire charges of boat, boatmen and other necessary equipments and also carriage and charge of filling bags with earth / sand but excluding cost of nylon crate and gunny/poly cemrnt bags as per direction of the engineer in charge. nb:- volume of each earth/ sand filled bags should not be less than 0.028 m3. size of nylon crate is 1metre x 1metre x 1metre. (b) where boats are necessary., labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of engr-in-charge (cost is excluding the cost of any types of filling materials). nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts.

CTN :39958826

21 Apr, 2025 2.90 Lacs

Nadia - West Bengal

Tender For corrigendum : supply of flood fighting materials with utilisation as an when required basis for coming monsoon 2025 under jurisdiction of debagram irrigation section i under debafram irrigation sub division. - supplying nylon cage netting 1 metre x 1 metre x 1 metre size with knot having mesh size 17.5 cm x 17.5 cm constructed with nylon thread (210 x 24) having tensile strength not less than 250 kg. / sq. cm. includingcarriage, delivery and stacking at site inclusive of all taxes complete., labour charges for dumping and placing in position properly filled innylon crates with filled in gunny / poly cement bags (minimum 25 nos.having capacity 50 kg) with local earth or sand, sewing and tying the crate with nylon wire within a lead of 150 m. and all lifts in river slope or bed by cutting trenches upto 50 cms depth, if necessary, or by boat including cost of hire charges of boat, boatmen and other necessary equipments and also including cost of bags, carriage and charge of filling bags with earth / sand but excluding cost of nylon crate as per direction of the engineer in charge.nb:- volume of each earth/ sand filled bags should not be less than 0.028 m3.size of nylon crate is 1metre x 1metre x 1metre.(b) where boats are necessary. same as item no 1, supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., extra rate for item no above for each additional lead of 60 metre or part thereof beyond the initial lead of 30 metre. 10 (ten)extra lead, dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts.

CTN :39958836

21 Apr, 2025 2.88 Lacs

Nadia - West Bengal

Tender For corrigendum : supply of flood fighting materials with utilisation as an when required basis for coming monsoon 2025 under jurisdiction of debagram irrigation section ii under debafram irrigation sub-division. - supplying nylon cage netting 1 metre x 1 metre x 1 metre size with knot having mesh size 17.5 cm x 17.5 cm constructed with nylon thread (210 x 24) having tensile strength not less than 250 kg. / sq. cm. includingcarriage, delivery and stacking at site inclusive of all taxes complete., labour charges for dumping and placing in position properly filled innylon crates with filled in gunny / poly cement bags (minimum 25 nos.having capacity 50 kg) with local earth or sand, sewing and tying the crate with nylon wire within a lead of 150 m. and all lifts in river slope or bed by cutting trenches upto 50 cms depth, if necessary, or by boat including cost of hire charges of boat, boatmen and other necessary equipments and also including cost of bags, carriage and charge of filling bags with earth / sand but excluding cost of nylon crate as per direction of the engineer in charge.nb:- volume of each earth/ sand filled bags should not be less than 0.028 m3.size of nylon crate is 1metre x 1metre x 1metre.(b) where boats are necessary. same as item no 1, supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., extra rate for item no above for each additional lead of 60 metre or part thereof beyond the initial lead of 30 metre. 10 (ten)extra lead, dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts.

CTN :39958839

21 Apr, 2025 2.76 Lacs

Nadia - West Bengal

Tender For corrigendum : supply of flood fighting materials with utilisation as an when required basis for coming monsoon 2025 under jurisdiction of tehatta irrigation section under debagram irrigation sub division. - supplying nylon cage netting 1 metre x 1 metre x 1 metre size with knot having mesh size 17.5 cm x 17.5 cm constructed with nylon thread (210 x 24) having tensile strength not less than 250 kg. / sq. cm. includingcarriage, delivery and stacking at site inclusive of all taxes complete., labour charges for dumping and placing in position properly filled innylon crates with filled in gunny / poly cement bags (minimum 25 nos.having capacity 50 kg) with local earth or sand, sewing and tying the crate with nylon wire within a lead of 150 m. and all lifts in river slope or bed by cutting trenches upto 50 cms depth, if necessary, or by boat including cost of hire charges of boat, boatmen and other necessary equipments and also including cost of bags, carriage and charge of filling bags with earth / sand but excluding cost of nylon crate as per direction of the engineer in charge.nb:- volume of each earth/ sand filled bags should not be less than 0.028 m3.size of nylon crate is 1metre x 1metre x 1metre.(b) where boats are necessary. same as item no 1, supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., extra rate for item no above for each additional lead of 60 metre or part thereof beyond the initial lead of 30 metre. 10 (ten)extra lead, dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts.

State Government

CTN :39924307

19 Apr, 2025 22.23 Lacs

Jalandhar - Punjab

Tender For supplying and installation of furniture for 4 no. temporary courts at existing judicial courts complex jalandhar - judges - main chair for court & retiring room - providing, supplying and placing of high back chair for dias / retiring room . seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. full back size: 46.5 cm. (w) x 60.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m and hardness load 12 +/- 2 kgf for 25% compression.back spine: the support spine should be made up of high pressure die cast polished hed aluminum.armrests : the armrest should be having two adjustment, height (6.0 0.5cm) and depth (6.0 0.5cm). height adjustment should be provided in aluminum structure of armrest which should be connected to aluminum back spine and should be operated by button. the depth adjustment should be provided in pad which should be fixed to armrest structure. armrest top should be made up of pu molded over plastic inner.active bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features: 360 revolving type front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort tilt tension adjustment can be operated in seating position 5 position tilt limiter giving option of variable tilt angle to the chair seat / back tilting ratio of 1:2 the mechanism housing should be made up of hpdc aluminum & black powder coated (dft 40 to 60 micron)seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 3.75 0.1 cmlumbar support assembly: the lumbar support assembly should consist of lumbar spine (material-glass fiber filled nylon) which should be fixed to aluminum back spine. the lumbar pad (material- poly propylene) should be fixed to lumbar spine through lumbar pad support. lumbar support assembly has height adjustment of 5.0 0.5cm.pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 0.3cm.pedestal assembly with castors:the pedestal should be high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-center dia.(75.0 1.0cm. with castors.)headrest :the neckrest assembly consshould be ts of upholstered neckrest inner(material-polypropylene) with moulded polyurethane foam and polyster fabric.upholstered inner should be fixed to neckrest cover.neckrest should be fixed to back assembly through neckrest spine .neckrest assembly has height adjustment of 5.5 +/- 0.5cm and rotation adjustment of overall 20 +/- 2 .twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter.overall dimensions of chairseat height - min 45.5 to max 55.5cm, reader / steno chair: providing, supplying and placing of mid back chair reader /steno chair . seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. mid back size: 36.5 cm. (w) x 55.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m and hardness load 12 +/- 2 kgf for 25% compression.back

State Government

CTN :39823571

15 Apr, 2025 NA

Patiala - Punjab

Tender For corrigendum : rate contract of consumable items for jan aushadhi store government rajindra hospital patiala - 2-0 17mm 3x3x1.5 with pledgets, braided polyster and coated with polt butylate suture 5-0 4846, braided polyster and coated with polt butylate suture no.2, braided polyster and coated with polt butylate suture no.5, 0.014"*260cm wire, 0.018"*300cm wire, 0.035"*150cm wire, 0.035"*260cm wire, 1 cc syringe, 1.4 mm side port keratome, 10-0 double arm nylon suture, 10-0 double armed nylon suture on a spatulated needle, 10ba20, 10ba20d, 10ba30d, 10ba40, 10ba50d, 10ba60, 14ba20, 14ba20d, 14ba30d, 14ba40, 14ba50d, 14ba60, 1971 bag+plate, 1972 bag+plate, 1973 bag +plate, 2 cc syringe, 20ml syringe, 5.2 mm keratome, 50cc syringe, 5cc syringe, 5f tiger catheter, 60 cc syringe, 6-0 double silk suture, 6100 bag, 6fr femoral sheath, 6fr radial sheath, 8-0 vicryl suture, abg kit, act vials (bl life sciences), adhesive surgical tape, adk 28 no, adk 32 no, airway 4 no, ambu bag adult, ambu bag with mask, ankle binder (all sizes), antimicrobial incise drape l size, antimicrobial incise drape m size, aortic cannula 18fr, aortic cannula 20fr, aortic cannula 22fr, arm pouch (all sizes), arm pouch sling, baby wipes, biliaflet mechanical aortic valve, biliaflet mechanical mitral valve, bimannual irrigation aspiration (21g) compatible with oertli faros machine, bipap mask, bipap mask medium size, bipap mask small size, blade 11no, blade 12 no, blade 15no, blade 23no, blood transfusion set (sterilized), bone wax sterlised, bougee, bp apparatus, braided polyster and coated with polt butylate suture (ethibond) 2 no. 4843, braided polyster and coated with polt butylate suture (ethibond) 2-0 26mm 6x3x1.5 with pledgets, cap surgical, cardioplegia aortic root cannula with vent 5fr, cardioplegia aortic root cannula with vent 7fr, cardioplegia aortic root cannula with vent 9fr, cardioplegia cornary ostial perfusion cannula 10fr, cardioplegia cornary ostial perfusion cannula 12fr, cardioplegia cornary ostial perfusion cannula 14fr, cardioplegia delivery system(delnido), cardioplegia retrograde cannula 15fr, c-arm cover, catgut 1 no rb 4259ep, catgut 1-0 4242, catgut 2-0 rb, catgut 3-0 rb, catgut 5-0 cutting needle, catgut loop, catgut no 1 rb 40mm, cautery lead bipolar, cautery pencil unipolar, cbd stent 10fr x 10cm double pigtail, cbd stent 10fr x 10cm straight, cbd stent 7fr x 10cm double pigtail, cbd stent 7fr x 10cm straight, center line triple lumen, chest tube 24no, chest tube 28 no, chest tube 32 no, chest tube no 20 straight and angled, chest tube no 28 straight and angled, chest tube no 32 straight and angled, chest tube no 36- straight and angled, child ambu with face mask, chromic catgut no. 2 roundbody, circular stapler 28 mm, circular stapler 33 mm, clavicle brace, codan set pvc, colostomy adhesive remover spray, colostomy bag and kit, colostomy barrier cream, combined spinal epidural set 18 no, composite mesh 15 x 15 cm, composite mesh 20 x 15 cm, composite mesh 30 x 20 cm, connectors- y connector size, 3/8x3/8x3/8 for heart lung machine, connectors- y connector size:1/2x1/2x1/2 for heart lung machine, connectors- y connector size:1/4x1/4x1/4 for heart lung machine, container 30ml, container 60ml, cord clamp, core biopsy gun 18 no., core biopsy gun 20 no., corrugated drain, cotton umbilical tape, crape bandage 10cm x 4m, crape bandage 15 cm x 4m, crescent blade 2.6mm, cresecent blade, d.l.t tube left & right 37frg, d.l.t tube left & right 39frg, d.l.t tube left & right 41frg, dialyzer, digital thermometer, disposable examination gloves latex free size, disposable pressure infusion, disposable pressure pump for rfa, disposable proctoscope l, disposable proctoscope m, disposable syringe without lock 10ml, disposable syringe without lock 20 ml, disposable syringe without lock 50 ml, disposable vitrectomy cutter compatible with oertli faros machine, dj stent 6no, drape sheet, dy connecting tube, dynamic cock up splint (all sizes),

Central Government/Public Sector

CTN :39905116

23 Apr, 2025 NA

Kurukshetra - Haryana

Tender For supply of revolving chair with fixed arm rest (polypropylene) synchronic tilt mechanism. upright locking with360 degree-revolving type, pedestal base: nylon having nylon twin wheel castor of 5 no?s having 50mm di ameter , seat (100% polyester fabric(220 gm/m2) black in colour) : pressed and moulded with pu foam (density of 45 kg per m3) with ergonomic seat design having curved sliding seat, backrest is made of: one piece injecti on moulded frame, chair included the pneumatic height adjustments: yes, height adjustment: up to 65mm (?5 mm), with fixed lumbar backrest support (mesh fabric), overall width: 650mm(?10 mm), backrest height:650 mm(?15 mm), backrest width:500mm(?10 mm), seat height:525mm(?10 mm), seat width:460mm (?10 mm), s eat depth:480mm (?10 mm), thickness of plywood used in seat :12mm(?1mm), minimum of 01 year warranty r equired, certificates like bifma, iso, oem, green guard, aiota should also be enclosed. [ warranty period: 12 months after the date of delivery ]

corporations/Associations/Others

CTN :39896785

23 Apr, 2025 5.00 Lacs

Ranchi - Jharkhand

Tender For supply of surgical consumables items - taylor brace , clavicle brace , skin traction kit , pelvic traction kit , cuff and collar , fetal doppler , bed pan , urinal , x ray view box led 14 x17 , romovac -16 no , romovac -14 no , romovac -08 no , mesh 6 x11 , mesh 15 x15 , nylon 2-0 , upt kit , iv set , bt set , disposable siring 5 cc , glucostrip , glucometer , gloves no-8 , gloves no-7 , gloves no-6.5 , surgeon cap disp

corporations/Associations/Others

CTN :39897841

29 Apr, 2025 45.96 Lacs

Bokaro - Jharkhand

Tender For supply of frp mesh no. - 16 size - 1000mmx2800m m , frp mesh no. - 10 size - 1300mmx1800m m , splash/v-bar ct coil size 61mmx61mm ( 1mm) thickness 1.2mm, length-8" perforation diamond 7mmx7mm , d-lock for v bar grid, moc: gla ss filled nylon, make-cool deck industries pvt ltd.

Central Government/Public Sector

CTN :39872995

19 Apr, 2025 1.25 Lacs

Bikaner - Rajasthan

Tender For supply of purchase of consumable for research items - nylon net 40 mesh 4.2m width x 100 m length, agro shading net 75% uv stabilized 3 m width x 50 m length , pvc coated tarpolin fabric size: 20x20 ft., ant bird net hdpv uv stabilized 30 m length x 10 m width mesh size: 3/4 inch x 3/4 inch, filament 0.8 mm, total rs.

	Apr 2025
Su	Mo	Tu	We	Th	Fr	Sa
30	31	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	1	2	3
4	5	6	7	8	9	10

	Mar 2025
Su	Mo	Tu	We	Th	Fr	Sa
23	24	25	26	27	28	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31	1	2	3	4	5

	Apr 2025
Su	Mo	Tu	We	Th	Fr	Sa
30	31	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	1	2	3
4	5	6	7	8	9	10

	Mar 2025
Su	Mo	Tu	We	Th	Fr	Sa
23	24	25	26	27	28	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31	1	2	3	4	5

Brass Mesh Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector