Latest brass pipe Tenders | Government brass pipe Tenders

Central Government/Public Sector

CTN :40559115

13 Jun, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of gasket for 32 mm n.b. pipe for flange welded joint (pipe to equipment). drawing no.:- wd-83062-s-07 , alt (6) item - 1 specification: - 04-abr-2019, (rev.-2). [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40559425

20 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply of set of brass pipe fittings (female connector without ferrules for gauges connected with nylon tubes) as per clw drg.no. 1209 -18.406-107, serial nos. 01 & 02, alt.5 or latest if any confirming to clw specification no.clw/ts/99/cf/5 alt.8. set consisting of 02 items as follows. 1) female connector 6mm od (nylon tube) x 1/4 inch bsp(p) as per clw drg. no. 1209-18.406-107, serial no. 01, alt -5 or latest if a ny. qty/set.-01 no. 2) female connector 6mm od (nylon tube) x 3/8 inch bsp(p) as per clw drg. no.1209-18.406-107, serial no. 02, alt - 5 o r latest if any. qty/set. = 01 no [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40559428

20 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply of brass pipe fitting male connector 6 mm odx1/8" bspt (m) as per clw specification no. clw/ts/99/cf/5 alt-8 for 3-phase loc os. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40521258

19 Jun, 2025 2.96 Lacs

Kanyakumari - Tamil Nadu

Tender For supply of 5008054 hdep pipe 140 mm od with both side collar and ms flanges is 49841995 pe 100 pn10 in 6 mtr length with both sides collar and ms flange fixed welded , 5008053 hdpe pipe conforming to is 49841995 material grade pe100 pressure rating pn10 in 6 mtr length of size 110 mm od , 5008057 hdpe pipe 160 mm od with both side collar and ms flange is 4984 1995 pe 100 pn 10 in 6 mtr , 5008009 hdpe pipes conforming to is 4984 1995 material gradepe100 pressure ratingpn10 in 6 mtr length of size 110 mm od , 5008022 hdpe pipes conforming to is4984 1995 material gradepe100 pressure rating pn8 in 6 mtr length of size 140 mm od

Central Government/Public Sector

CTN :39595097

03 Jun, 2025 NA

Goa - Goa

Tender For bid to ras corrigendum : supply of bronze fittings lot 13 for frigate gsl yard nos 1258 and 1259 - bronze straight equal union tee with outer thread dn15 pn160 , bronze straight equal union tee with outer thread dn20 pn160 , bronze end welded piece dn25 , bronze welded piece on pipe for union fittings dn15 pn40 , bronze track welded piece with adjusted plug dn15 , bronze welded piece for finger protector on pipe dn200 pn40 , bronze union-end snap-up overlapped connection dn3 pn100 , bronze intermediate union for overlapped connection type 6 dn6 pn100 , bronze screw in union with threaded end for pipe thread type 9 dn6 pn 16 , bronze screw-in union with threaded end for metric thread type 8 dn3 pn16 , bronze screw-in union with threaded end for metric thread type 8 dn10 pn16 , bronze plug nut m36x2 pn10 , bronze plug nut dn32 pn100 , bronze plug nut dn10 pn100 , bronze plug nut dn6 pn100 , wrench for quick opening nuts dn50 65 80 , bronze end welded piece dn20 m39x2

CTN :40423805

05 Jun, 2025 NA

Darjeeling - West Bengal

Tender For corrigendum : construction of hardened amn bkr (30 mt ) under the aor of hq 27 mtn div - part i :concrete , plastering work and water proofing compoundpart ii : reinforcementpart iii : centering shuttering & formwork, pre-fabricated mild steel door of size 1100x1700mm outer frame made out of isa 40x40x6mm and door shutter frame of isa 35x35x5mm and all as stiffner of isa 30x30x3mm as per drawing, app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg/sqm,, polythene membrane sheet of grade 2504 thickness 150micron, hdpe sand bag of size 34 x14 inside insulated interlocking stitch weight of the bag is42-45 gram/bag, anti freezing compound approved by accepting officer / confirming to latest is standards, water proofing compound in 1 kg packing,, pre-fab steel jally made up of isa 30x30x3mm frame and cover frame made of 25x25x3mm and 10 mm dia bars in jally @ 25mm centre to centre bothways welded to frame of size 900x900mm complete all as per rfp & drg ., pre painted cgi sheet 2100mm x 800mm x 0.63mm,, 50mm thk pcc jumbo interlocking coloured tiles,each tile covering and area of 0.0264sqm (0.12mx 0.22m), confirming to is- 15658-2006, alkaline pipe 50mm dia., fire resistance paint for internal surface., fire resistance primer for internal wall surfaces, synthetic enamels painting to steel surfaces as specified., red oxide primer., bitumen 80/20 grade,, structural steel ismb300, 6.60 mtr length (roof beam), shs 75x75x5mm 6.60 mtr length (roof beam), deck sheet-1.0mm tr-80 grade,350, 12mm thick ms base plate of size 0.30x0.30 mtr (column), 5mm thick ms plate of size 0.300x 0.40 mtr(90 degree angle), anchor bolt of 20mm dia,0.45mtr length, hdpe pipe(rain water pipe) 75mm dia best quality, hdpe hose pipe 25mm dia (bore) corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi., 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set. make : kirloskar, crompton, honda and quivalent., fire extinguisher a/b/c type portable net 2 kg capactiy cylindrical isi marked (bis 15683 : 2006 range > 2 mtrs (minimum) with discharge pipe & nozzle complete and suitable bucket for hanging on wall., lighting conductors set complete with all accessories as per details given below:-(a) zinc & alloy coated safe earthing electrode (76.3mm dia) 2mtr long with back filled compound conduct lite - 2 bags cpri approved.(b) air terminal four pointed aluminium rod 12mm dia and 600mm long fitted on gi pipe.(c) gi pipe med grade 06 mtr long 40mm dia. make: tata/ jindal/ bansal.(d) epoxy insulator with screw 10 nos.(e) copper cable 35 sqmm multi-stranded single core. make : plaza/ havells/ rallison/ isi-10 r/m.(f) testing points terminal box made out of gun metal or phosphorous of size 75 x 75 x 25mm with screw.(g) nut & bolts 2" x 1/2" - 08 nos(h) foundation nuts & bolts 16mm x 400mm - 4 nos(j) frp earthing pit with cover -01 nos(k) copper lugs 35 sqmm for connection of cable with nut & bolt of suitable size - 02 nos, electric earthing set complete with items as given below :-(a) gi earthing plate 600mm x 600mm x 6mm thick with two nos holes - 01 no.(b) gi pipe15mm dia light grade for the protection of gi wire, make : tata/jindal/prakash - 8 mtr.(c) gi pipe 20mm light grade for watering, make : tata/jindal/prakash - 1.2 mtr.(d) gi wire 4mm dia - 02 kgs.(e) gi funnel with wire mesh suitable for 20mm dia gi pipe - 1 no(f) common salt - 50 kgs.(g) frp earthing pit with cover - 01 no.(h) gi nut bolt with washer of size 10mm dia 25mm long - 2 nos. (h) charcoal - 50 kgs., supply and installation solar lantern model no ms122 solar lantern contains battery , solar pannel, led bulbs and automatic charging of working time 25 hours and led life time 40000 hrs , solar pannel of 5w li-ion type battery 2200 mah capacity of volt 7.4v, supply and installation luminous solar inverter

Central Government / Public Sector

CTN :40270806

05 Jun, 2025 NA

Panipat - Haryana

Tender For corrigendum : supply of primary supports for p25 project at iocl panipat refinery - supply of primary supports, u-bolt, un 3786-01, consisting of u-bolt form a, din 3570,, acc. to un 3786-03 and, manufact. drwg., longitudinal, guide, u-bolt 1.0036 s235jrg1, mat. deliv. cond. en 10025-1/-2, pipe shoe, manufact. drwg., consisting of two plates,, welded at right angles to, each other, with two clamps, form a,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, pipe shoe, manufact. drwg., consisting of two plates,, welded at right angles to, each other, with two clamps, form a,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, pipe shoe, manufact. drwg., consisting of two plates,, welded at right angles to, each other, with two clamps, form a,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, pipe shoe, manufact. drwg., consisting of two plates,, welded at right angles to, each other, stiffening plates,, with two clamps form a,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, pipe shoe, manufact. drwg., consisting of two plates,, welded at right angles to, each other, stiffening plates,, with two clamps form a,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, pipe shoe, manufact. drwg., consisting of two plates,, welded at right angles to, each other, stiffening plates,, with two clamps form a,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, pipe shoe, manufact. drwg., consisting of two plates,, welded at right angles to, each other, stiffening plates,, with two clamps form a,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, slope pipe shoe, manufact. drwg., consisting of plates, two of, them welded at right angle to, each other, with two clamps, form a,, vertically adjustable,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, slope pipe shoe, manufact. drwg., consisting of plates, two of, them welded at right angle to, each other, with two clamps, form a,, vertically adjustable,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, slope pipe shoe, manufact. drwg., consisting of plates, two of, them welded at right angle to, each other, with two clamps, form a,, vertically adjustable,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, slope pipe shoe, manufact. drwg., consisting of plates,, welded at right angle to, each other, stiffening plates,, with two clamps form a,, vertically adjustable,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, slope pipe shoe, manufact. drwg., consisting of plates,, welded at right angle to, each other, stiffening plates,, with two clamps form a,, vertically adjustable,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, slope pipe shoe, manufact. drwg., consisting of plates,, welded at right angle to, each other, stiffening plates,, with two clamps form a,, vertically adjustable,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, slope pipe shoe, manufact. drwg., consisting of plates,, welded at right angle to, each other, stiffening plates,, with two clamps form a,, vertically adjustable,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, slope pipe shoe, manufact. drwg., consisting of plates,, welded at right angle to, each other, stiffening plates,, with two clamps form a,, vertically adjustable,, acc. to manufacturing drwg.,, loose point, clamp a36, plate a36, mat. deliv. cond. astm a36/a36m, pipe shoe, manufact. drwg., cons

State Government

CTN :40514371

03 Jun, 2025 NA

Delhi - Delhi

Tender For supply of mechanical items for various tubewells installed at loknayak puram, bakkarwala. - supply of gi pipe 50 mm dia, medium class with gi flange welded on both sides, each pipe 3mtr. long with threading work on each side of pipe, each flange should have 4 holes and cut for submersible cable. make: jindal / tata or any other make approved by djb., supply of gi tail piece medium class 0.5 mtr. long inclduing one end flanged and the other end threaded of 50 mm dia., supply of ms clamp 8 mm thick suitable for 8 inch bore dia, complete with nut and bolts and washers for holding the 50 mm dia pipe including bending and shaping etc. as required., supply of gi bend 50mm dia 90 deg. double flange. heavy class, make: ganesh / jindal/ tata / isi, supply of 6 mm thick steel wire rope to hold the pump., supply of required off size threaded nut bolts and washers of good quality., supply of ms bore cover 4 mm thick suitable for 8 inch bore size in 2 pieces complete with bolting arrangement angle iron frame and provision of 50 mm dia hole in the center., supply of neoprene rubber packing 3 mm thick, suitable for 50 mm bore pipe and having 4 holes for nut / bolts.

Central Government/Public Sector

CTN :40512014

05 Jun, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of gasket for 32 mm n.b. pipe for flange welded joint (pipe to equipment). drawing no.:- wd-83062-s-07 , alt (6) item - 1 specification: - 04-abr-2019, (rev.-2) [ warranty period: 30 month s after the date of delivery ]

Central Government/Public Sector

CTN :40511903

27 Jun, 2025 NA

Kalyan - Maharashtra

Tender For supply of set of brass pipe fittings as per clw specification no. clw/ts/99/cf/5 with latest revision. a s per annexure-1 attached (one set consist of three items are 90 nos.). material to be procured clw appro ved source or their authorized dealers only ]

Brass Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors