Latest brass pot Tenders | Government brass pot Tenders

Central Government / Public Sector

CTN :39629089

01 Apr, 2025 NA

Secunderabad - Telangana

Tender For supply of set of accessories consisting of 05 items for dual flush valve suitable for make: m/s marc model mac-3080 or m/s essess model no-e251c or m/s jaquar model flv-chr-1085. 1) brass chrome plated cap of si ze (approx.) od-56 mm with one end internal threads & built in anti-theft arrangement: qty 01 no/set. 2) set of brass c hrome plated front push buttons od -35 mm (approx.) cap of od- 45 mm (approx.) having anti-theft arrangement with one end suitable to fit in above mentioned models: qty 01 set/set. 3) outer spring of od 50 mm(approx.) and free leng th of around 40 mm(approx.) to suit above models. qty- 01 nos/set 4) internal spring free length 70mm, od -30mm thi ckness around 1.5mm (approx.) qty-1 nos/set 5) hdpe rectangular shaper washer of size 40x20 mm(approx.) internal shaping holding arrangement which suit above models: qty-1 nos/set. ]

State Government

CTN :39614772

12 Mar, 2025 34.70 Lacs

Latehar - Jharkhand

Tender For supplying of spares part for india mark-ii deep well hand pump under d wand s div latehar for the year 2024-25 - spare parts of deep well hand pump india mark-ii., hexagonal bolt m12 x 1.75 x 40 mm long, hexagonal ( high tensile) bolt 10mm, nyloc nut m10x1.5, handle axle(stationless steel), chain with coupling, handle assembly (gi), water tank assembly (gi), lower valve assembly im ii, upper valve assembly im ii, rubber seat retainer im ii, reducer cap for cylinder im ii, nitrile sealing ring im ii, hexagonal rod coupling, pump head assembly (gi) with front cover bolt & third plate, nitrile rubber clinder sealing big for lower valve for im ii, nitrile rubber clinder sealing small ring for upper valve im ii, nitrile rubber cup washer for im ii & iii, ball bearing 6204z, cylinder assembly complete set for im ii cylinder, cylinder body with brass liner for im ii with reducer cap for top & bottam, upper valve guide, b.s connecting rod, spacer, add 5% gst.

State Government

CTN :39601440

11 Mar, 2025 35.85 Lacs

Ranchi - Jharkhand

Tender For supply of spare parts for standard deep well hand pump im ii/im iii under d.w.and s. division, ranchi west, ranchi during the year 2024-25. - spare of deep well hand pump for im-ii & im-iii (vlom-65 & vlom-50) conforming to is:15500 (relevant part 1 to 8)/2004 (with latest amendment) only from manufacturers/ suppliers approved from bis/unicef after proper verification of offer sheet, inspection certificate, marking and packing etc, as per bis/unicef s standard norms., hexagonal bolt m12x1.75x40mm long common to im ii & iii, handle axle (stainless steel), ball bearing 6204 z, spacer for handle, chain with coupling, hexagonal rod coupling m12x1.75x50mm long., nitrile rubber cup washer for india mk-ii, pump head assembly (g.i.) with front cover , hexagonal nut & bolt & third plate., front cover (g.i.), handle assembly (g.i.), (a) water tank assembly for mark ii (g.i.), connecting rod 3mtr. long with coupling and nut (electrogalvanized), cylinder assembly complete set for im-ii, upper valve(plunger) assembly complete set for im ii, lower (check) valve assembly complete set for im ii, plunger rod (s.s,) for mark-ii, upper valve guide (g.m.) for mark-ii & mark-iii (vlom-65), third plate for head assemble (galvanized), cylinder body with brass liner for im-ii with reducer cap for top and bottom., gun metal spacer (bucket), 32mm g.i. socket, add 5% gst

State Government

CTN :39601442

12 Mar, 2025 30.00 Lacs

Ranchi - Jharkhand

Tender For supply of spare parts for standard deep well hand pump im ii/im iii under d.w.and s. division ranchi east, ranchi during the year 2024-25. - spare of deep well hand pump for im-ii & conforming to is:15500 (relevant part 1 to 8)/2004 (with latest amendment) only from manufacturers/ suppliers approved from bis/unicef after proper verification of offer sheet, inspection certificate, marking and packing etc, as per bis/unicef s standard norms., hexagonal bolt m12x1.75x40mm long common to im ii & iii, hexagonal nut m12x1.75mm, hexagonal rod coupling m12x1.75x50mm long., cylinder body with brass liner for im-ii with reducer cap for top and bottom., hexagonal bolt for front cover m12x1.75x20mm long., upper valve(plunger) assembly complete set for im ii, lower (check) valve assembly complete set for im ii, upper valve guide (g.m.), reducer cap for cylinder mark-ii, check valve guide mark-ii, g.m. spacer i.m. -ii, rubber seat retainer for mark-ii, b.s. connecting rod 3.00 m long, water tank assembly for mark ii, c.i. cylinder im-ii, pump head assembly, plunger rod (ss) for mk -ii, add 5% gst

State Government

CTN :39614819

12 Mar, 2025 31.14 Lacs

Ramgarh - Jharkhand

Tender For supply of spare parts of deep well hand pump conforming with latest amendment under dws division ramgarh 204-25 - spare parts of india mark ii deep well hand pump conforming to i.s. - 15500 (pt-ii)/2004 to be procured only from approved manufacturers from approved manufacturers from unicef approved qualified supplier & after proper verification of offer sheet inspection certificate marketing and packing etc as per unicefs standard norms, hexagonal bolt m12x1.75x40mm long common to both mk-ii & iii., hexagonal nut m12x1.75. , high tensile bolt m10x1.5x40mm long., nyloc nut m10x1.5mm, handle axle (stainless steel)., ball bearing 6204z., spacer for handle, chain with coupling., nitrile rubber cup washer for mark-ii & ill., nitrile rubber sealing ring mark-ii., nitrile rubber seating big for lower valve mark-ii., nitrile rubber seating small for upper valve mark-ii., hexagonal rod coupling m12x1.75x50mm long, pump head assembly (g.i.), front cover (g.i.), handle assembly (g.i)., water tank assembly for mark-ii (g.i.), connecting rod 3mtrs long with coupling & nut (electrogalvanized)., cylinder assembly complete set for india mark-ii., upper valve assembly complete set for lm-ii, lower valve assembly complete set for im-ii, reducer cap for cylinder mark-ii, plunger rod (s.s.) for mark - ii, upper valve guide (gm)., rubber seat retainer far mark- ii, third plate for head assembly (galvanized), cylinder body with brass liner for im-ii with reducer cap for top & bottom., brass linear, check valve seat for mark - ii, 32 mm g.i. socket, gst @ 5% (add sgst 2.5% + cgst 2.5%)

corporations/Associations/Others

CTN :39594382

05 Apr, 2025 7.40 Lacs

Dewas - Madhya Pradesh

Tender For tender for supply of upvc ball valve 15 mm , upvc ball valve 20 mm , upvc ball valve 25 mm , upvc ball valve 40 mm , upvc ball valve 50 mm , upvc brass elbow 15 mm , upvc brass elbow 20 mm , upvc brass elbow 25 mm , upvc brass elbow 25 x 15 mm , upvc brass elbow 20 x 15 mm , upvc brass elbow 25 x 20 mm , upvc brass fta 15 mm , upvc brass fta 20 mm , upvc brass fta 25 mm , upvc brass fta 40 mm , upvc brass fta 50 mm , upvc brass fta 25 x 15 mm , upvc brass fta 20 x 15 mm , upvc brass fta 25 x 20 mm , upvc brass mta 15 mm , upvc brass mta 20 mm , upvc brass mta 25 mm , upvc brass mta 40 mm , upvc brass mta 50 mm , upvc brass mta 20 x 15 mm , upvc brass mta 25 x 15 mm , upvc brass tee 15 mm , upvc brass tee 20 mm , upvc brass tee 25 mm , upvc brass tee 20 x 15 mm , upvc brass tee 25 x 15 mm , upvc brass tee 25 x 20 mm , upvc coupler 15 mm , upvc coupler 20 mm , upvc coupler 25 mm , upvc coupler 40 mm , upvc coupler 50 mm , upvc cross tee 15 mm , upvc cross tee 20 mm , upvc cross tee 25 mm , upvc elbow 15 mm , upvc elbow 20 mm , upvc elbow 25 mm , upvc elbow 40 mm , upvc elbow 50 mm , upvc end cap 15 mm , upvc end cap 20 mm , upvc end cap 25 mm , upvc end cap 40 mm , upvc end cap 50 mm , upvc f.t.a. 15 mm , upvc f.t.a. 20 mm , upvc f.t.a. 25 mm , upvc f.t.a. 40 mm , upvc f.t.a. 50 mm , upvc halfset 15 mm , upvc halfset 20 mm , upvc halfset 25 mm , upvc halfset 40 mm , upvc halfset 50 mm , upvc long handle ball valve 15 mm , upvc long handle ball valve 20 mm , upvc long handle ball valve 25 mm , upvc long handle ball valve 40 mm , upvc long handle ball valve 50 mm , upvc m.t.a 15 mm , upvc m.t.a 20 mm , upvc m.t.a 25 mm , upvc m.t.a 40 mm , upvc m.t.a 50 mm , upvc pipe sch-80 15 mm , upvc pipe sch-80 20 mm , upvc pipe sch-80 25 mm , upvc pipe sch-80 40 mm , upvc pipe sch-80 50 mm , upvc red bush 20 x 15 mm , upvc red bush 25 x 15 mm , upvc red bush 25 x 20 mm , upvc red bush 40 x 15 mm , upvc red bush 40 x 20 mm , upvc red bush 40 x 25 mm , upvc red bush 50 x 15 mm , upvc red bush 50 x 25 mm , upvc red bush 50 x 32 mm , upvc red bush 50 x 40 mm , upvc red elbow 20 x 15 mm , upvc red elbow 25 x 15 mm , upvc red elbow 25 x 20 mm , upvc red tee 20 x 15 mm , upvc red tee 25 x 15 mm , upvc red tee 25 x 20 mm , upvc red tee 32 x 15 mm , upvc red tee 32 x 20 mm , upvc red tee 32 x 25 mm , upvc red tee 40 x 15 mm , upvc red tee 40 x 20 mm , upvc red tee 40 x 25 mm , upvc red tee 50 x 15 mm , upvc red tee 50 x 20 mm , upvc red tee 50 x 25 mm , upvc red tee 50 x 40 mm , upvc reducer 20 x 15 mm , upvc reducer 25 x 15 mm , upvc reducer 25 x 20 mm , upvc reducer 40 x 15 mm , upvc reducer 40 x 20 mm , upvc reducer 40 x 25 mm , upvc reducer 50 x 15 mm , upvc reducer 50 x 20 mm , upvc reducer 50 x 25 mm , upvc reducer 50 x 40 mm , upvc step over bend 15 mm , upvc step over bend 20 mm , upvc step over bend 25 mm , upvc tank nipple 15 mm , upvc tank nipple 20 mm , upvc tank nipple 25 mm , upvc tank nipple 40 mm , upvc tank nipple 50 mm , upvc tank nipple socket end 15 mm , upvc tank nipple socket end 20 mm , upvc tank nipple socket end 25 mm , upvc tank nipple socket end 40 mm , upvc tank nipple socket end 50 mm , upvc tee 15 mm , upvc tee 20 mm , upvc tee 25 mm , upvc tee 40 mm , upvc tee 50 mm , upvc thrd elbow 15 mm , upvc thrd elbow 20 mm , upvc thrd elbow 25 mm , upvc thrd elbow 40 mm , upvc thrd elbow 50 mm , upvc thrd tee 15 mm , upvc thrd tee 20 mm , upvc thrdtee 25 mm , upvc thrd tee 40 mm , upvc thrd tee 50 mm , upvc union 15 mm , upvc union 20 mm , upvc union 25 mm , upvc union 40 mm , upvc union 50 mm , threded end plug 15 mm , threded end plug 20 mm , upvc elbow 45 15 mm , upvc elbow 45 20 mm , upvc elbow 45 25 mm , upvc elbow 45 40 mm , upvc elbow 45 50 mm , upvc y stainer , upvc nr valve 20 mm , upvc nr valve 25 mm , upvc hex nipple 25 mm , upvc solvent 118 ml , air rock drill hydraulic pressure pipe , air rock drill hydraulic pressure pipe , pvc green suction pipe , pvc green suction pipe , pvc green suction pipe , pvc green suction

State Government

CTN :39408852

12 Mar, 2025 NA

Karur - Tamil Nadu

Tender For corrigendum : procurement of auto garage equipments spares annual rate contract - auto garage equipment spares, hourmeter 12v make:yenkey-electronics-615091020001, tc oil filter element - ek3246 elofic / pi 441800., master cyl. assy.(tandam)-p.no.:29066698, make:bi, wheel cylinder lh - part no. 64677953 -tvs girling, wheel cylinder kit - mi no.64967159,make: tvs-bt, universal joint kit-part.no.112007 - xlogwb/gogo / model gx 20, oil filter element for bolero jeep make: purolator - pi-170300 / pi - 530500, air pressure gauge - p. no. : 2150 make : pricol, engine oil pr. gauge ( 0-7 kg/cm2 ),make - pricol - p.no: 2017, ammeter - part.no. 4035 / 40005 make: pricol only, trans. clutch pressure gauge - 2155 make:pricol / oe part no.: 8000102906, diaphragm p.no. : 843 310 make : tvs-wabco, spring - p. no. : m 843300 make : sundram clayton, seal assy p.no. m-841000 make: sundram clayton, elgi air horn asy.-make:elgi,model:std-p.no:s09101, unloader valve -m301910 hm - 81011976 make : s.c., radiator cap, small 7 lbs - part no.ho-103, make : hold on / sippy brass type, radiator cap - big size 69mm dia filler neck, shim for pinion nut 24v self motor 9030-896, pinion & bearing assy.24v 11 teeth - 9030-859 aa, clutch outer plate for 24v self motor 9030-951 a, clutch inner plate for 24v self motor 9030-876 b, pressure plate for clutch 24v self motor 9030-623, plunger assy for armature 24v self motor 9030-298a, field coil(main) for 24v self motor 9030-51, solenoid switch assy for 24v self motor 267-4a, field coil (aux.) for 24v self motor - 9030-52a, carbon brush for 24v self motor - 9030-644, brush carrier assy for 24v self motor - 9030-77, c.e. shield assy for 24v self motor - 9030-76, thrust washer for armature 24v self motor-9030-237, bearing bush for de shield p.no:9030-693 (:make: lucas-tvs / kirloskar/ menon), oil seal-de shield assy24v selfmotor9030-808pos3850, packing washer (namada)24v self motor 9030-1241 ( 1 packet consist of 50 nos ), field connector for solenoid 24v - 9030-932, positive connector for solenoid switch - 9030-930, moving contact for solenoid switch 24v - 9030-1190, horn assy 24 with condenser vibersonic 21 -v c/fht (make : roots ), point set-12v/ 24v roots make horn vibrosonic type, carbon brush for 8" remi coach fan (type: c.f.-20), regulator assy 24v alternator - p.no. 26938063 a, brush assy for 24v alternator 9030-340, brush box assy for 24v alternator 9030-315a, fan assy for 24v alternator 9030-683, heat sink assy (aux) 24v alternator 9030-1603b, heat sink assy.negative-24v alternator- 9030-1939, de shield for 24v alternator - 9030-1688 d, fixing screw for de shield alternator - 9030-382, wiper blade - 81001915, battery terminal positive-brass, stp type, battery terminal negative make : shanco, stp type, regulator for 12v alternator - 26214575, bulb no 67,12 v, bulb halogen 12v-60/55w make:mico bosch no. 99510300041, pull & push switch - make : minda / hella long thread, ignition key switch - part.no. j-1019 - make : jay, starter button brass body with sealed rubber boot type - make :pricol ,part no: 3516, head light switch 24v- part.no. 6rd922504-make:pmp, head light holder - hp 1656 make: harson, head light assy. - part. no. : vsh-1431 / vsh-1432, make : vasko, 03 pin type, lucas type (02 nos. per set) ( make: anl-lux, mahindra di round: 81-5124), bulb 24 v-21w -pin type no:2441, bulb no.67, 24 v, allite p.no.t-711, bulb head light halogen 24 v 100/90 w collar type, electronic flasher unit - 24v - make: hella, copper ring terminal 50 sq.mm non insulated-7137, wire 4mm size: 32 / 0.2,max od : 1.95mm, finolex make, wires 5mm size:28/0.3, max od : 2.55mm, finolex-make, wires 6mm size:35/0.3 , max od : 2.75mm, finolex make, wires 8mm size:65/0.3, max od : 3.9mm, finolex-make, main bearing 010 u/s p.no:f0218210 make:bm copper, main bearing thrust washer(std-size) make: kir/ bm, tappet p.no: f4330022 make:al, connecting rod bearing-std size make:bimetalcopper, con. rod bearing 010 u/s, make :bm copper ., c

corporations/Associations/Others

CTN :39620173

20 Mar, 2025 NA

Multi City - Multi State

Tender For auction sale of bty o/s,tarpauline old,blanket o/s,air conditioner o/s,gen set 5.5 kva with trolley,jack assy o/s,(i) fire ext 50 ltr with brass cap,fire ext 6.5 ltr,mss(mild steel scrap),woolen regs,boggie wheel (alluminium with rubber mix),fire ext 50 ltr with brass cap,boggie wheel (alluminium with rubber mix),mfm (mixed ferrous metal),blanket,fire extingusher 50 kgs with brass cap,boot dms,boot dms/ankle,boot dms ankle,fire extinguisher 50 kg with brass capr

Central Government And Public Sector

CTN :38055734

10 Mar, 2025 NA

Kudankulam - Tamil Nadu

Tender For bid to ras supply of tip e 200, part no 74300222 for taiwan plasma corporation make sp 301 i water cooled cutting torch , tip e 100, part no 74300162 for taiwan plasma corporation make sp 301 i water cooled cutting torch , electrode a 100, part no 731300204 for taiwan plasma corporation make sp 301 i water cooled cutting torch , electrode a 200, part no 731300202 for taiwan plasma corporation make sp 301 i water cooled cutting torch , water tube, part no 739w3001 for taiwan plasma corporation make sp 301 i water cooled cutting torch , manual cutting torch body, part no 73030101 for taiwan plasma corporation make sp 301 i water cooled cutting torch , manual cutting torch handle, fiber 180 mm, part no 73530002 for taiwan plasma corporation make sp 301 i water cooled cutting torch , shield cap , brass and fiber, part no 73330004 for taiwan plasma corporation make sp 301 i water cooled cutting torch , shield cap, ceramic, part no 73330001 for taiwan plasma corporation make sp 301 i water cooled cutting torch

CTN :39578202

17 Mar, 2025 10.00 Lacs

Tirunelveli - Tamil Nadu

Tender For 2025-2026 annual tender in sivagiri town panchayat - gi pipe (1/2") mtr, gi pipe (3/4") mtr, gi pipe (1") mtr, gi pipe (1 1/4") mtr, gi pipe (1 1/2") mtr, gi pipe (2") mtr, gi pipe (2 1/2") mtr, gi pipe (3") mtr, gi pipe (4") mtr, gi pipe (5") mtr, gi pipe (6") mtr, 1/2" gi union, 3/4" gi union, 1" gi union, 1 1/4" gi union, 1 1/2" gi union, 2" gi union, gi elbow (1/2"), gi elbow (3/4"), gi elbow (1"), gi elbow (1 1/4"), gi elbow (1 1/2"), gi elbow (2"), gi elbow (2 1/2"), gi elbow (3"), gi elbow (4"), gi elbow (5"), gi elbow (6"), gi bend (1/2"), gi bend (3/4"), gi bend (1"), gi bend (1 1/4"), gi bend (1 1/2"), gi bend (2"), gi bend (2 1/2"), gi bend (3"), gi bend (4"), gi bend (5"), gi bend (6"), gi tee (1/2"), gi tee (3/4"), gi tee (1"), gi tee (1 1/4"), gi tee (1 1/2"), gi tee (2"), gi tee (2 1/2"), gi tee (3"), gi tee (4"), gi tee (5"), gi tee (6"), gi coupling (1/2"), gi coupling (3/4"), gi coupling (1"), gi coupling (1 1/4"), gi coupling (1 1/2"), gi coupling (2"), gi coupling (2 1/2"), gi coupling (3"), gi coupling (4"), gi coupling (5"), gi coupling (6"), gi reducer (1/2"), gi reducer (3/4"), gi reducer (1"), gi reducer (1 1/4"), gi reducer (1 1/2"), gi reducer (2"), gi reducer (2 1/2"), gi reducer (3"), gi reducer (4"), gi reducer (5"), gi reducer (6"), 2" gi cork, 3" gi cork, 4" gi cork, 1/2" gi hex nipple, 3/4" gi hex nipple, 1" gi hex nipple, 1 1/4" gi hex nipple, 1 1/2" gi hex nipple, 2" gi hex nipple, 2 1/2" gi hex nipple, 3" gi hex nipple, 3/4" 3/4 feet gi pipe nipple, 3/4" 1 feet pipe nipple, 3/4" 2 feet pipe nipple, 3/4" 2 1/2 feet pipe nipple, 3/4" 3 feet pipe nipple, 1 1/2" 1 feet gi pipe nipple, 1 1/2" 2 feet gi pipe nipple, 2" 1 feet gi pipe nipple, 2" 2 feet gi pipe nipple, 2" 1/2feet gi pipe nipple, 3" 1 feet gi pipe nipple, 3" 2 1/2 feet gi pipe nipple, 4" 3feet gi pipe nipple, 3/4" gi end cap, pvc pipe 1/2" (mtr), pvc pipe 3/4" (mtr), pvc pipe 1" (mtr), pvc pipe 1 1/4" (mtr), pvc pipe 1 1/2" (mtr), pvc pipe 2" (mtr), pvc pipe 63mm (mtr), pvc pipe 75mm (mtr), pvc pipe 90mm (mtr), pvc pipe 110mm (mtr), pvc pipe 140mm (mtr), pvc pipe 160mm (mtr), pvc coupler 1/2", pvc coupler 3/4", pvc coupler 1", pvc coupler 1 1/4", pvc coupler 1 1/2", pvc coupler 2", pvc coupler (63mm), pvc coupler (75mm), pvc coupler (90mm), pvc coupler (110mm), pvc coupler (140mm), pvc coupler (160mm), pvc elbow 1/2", pvc elbow 3/4", pvc elbow 1", pvc elbow 1 1/4", pvc elbow 1 1/2", pvc elbow 2", pvc elbow (63mm), pvc elbow (75mm), pvc elbow (90mm), pvc elbow (110mm), pvc elbow (140mm), pvc elbow (160mm), pvc bend 1/2", pvc bend 3/4", pvc bend 1", pvc bend 1 1/4", pvc bend 1 1/2", pvc bend 2", pvc bend (63mm), pvc bend (75mm), pvc bend (90mm), pvc bend (110mm), pvc bend (140mm), pvc bend (160mm), pvc end cap 1/2", pvc end cap 3/4", pvc end cap 1", pvc end cap 1 1/4", pvc end cap 1 1/2", pvc end cap 2", pvc end cap (63mm), pvc end cap (75mm), pvc end cap (90mm), pvc end cap (110mm), pvc end cap (140mm), pvc end cap (160mm), pvc tee 1/2", pvc tee 3/4", pvc tee 1", pvc tee 1 1/4", pvc tee 1 1/2", pvc tee 2", pvc tee (63mm), pvc tee (75mm), pvc tee (90mm), pvc tee (110mm), pvc tee (140mm), pvc tee (160mm), pvc mta 1/2", pvc mta 2", pvc mta (63mm), pvc mta (75mm), pvc mta (90mm), pvc mta (110mm), pvc mta (140mm), pvc mta (160mm), pvc fta (50mm), pvc fta (63mm), pvc fta (75mm), pvc fta (90mm), pvc fta (110mm), pvc fta (140mm), pvc fta (160mm), 2" pvc saddle piece 2" x 3/4", 2 1/2" pvc saddle piece, 3" pvc saddle piece 3" x 3/4", 4" pvc saddle piece 4" x 3/4", 5" pvc saddle piece 5" x 3/4 ", 6" pvc saddle piece 6 " x 3/4 ", isi sluice value (2"), isi sluice value (2 1/2"), isi sluice value (3"), isi sluice value (4"), isi sluice value (5"), isi sluice value (6"), isi sluice value (8"), isi sluice value (10"), 3/4" gate value, 1" gate value, 1 1/2" brass gate value, 2" brass gate value, 3" brass gate value, 4" brass gate value, 3" brass non return value, 4" brass non return value, 14" pipe range, pipe chain range, cutting player, haxsa blade

Brass Pot Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors