Latest brushless alternator Tenders | Government brushless alternator Tenders

Central Government/Public Sector

CTN :44632783

24 Apr, 2026 NA

Mumbai - Maharashtra

Tender For supply of brushless alternator of 4.5 kw, 110/130 v dc without any type of rectifier cum regulating unit but with other accessories as per rdso specification no. rdso/pe/spec/tl/0054-2003(rev-0) with amendment no. 1 & 2. [ warranty period: 30 months after the date ofdelivery ]

Central Government And Public Sector

CTN :44588106

30 Mar, 2026 NA

Bongaigaon - Assam

Tender For supply of cylindrical roller bearing nu- 311 (nu-311 ecj)size 55mm x 120mm x 29mm. makes: (a) nsk/japan. (b) skf/germany/austria & (c) fag/germany/india as per bill of materials of rdso specification no. rdso/pe/spec/tl/0054-2003 (rev 0) amndt-2 for 4.5 kw brushless alternator

CTN :44561461

23 Mar, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of repair and overhauling service - diesel generators- diesel generator sets; job work order for repair to diesel generator set 62 5 kva engine no t4 8907 1720562 alternator no lbs3k17b 26968h; yes; buyer premises

CTN :44535251

22 Apr, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of single row deep groove ball bearing with two shields, clearance c3, bearing no. 6309-2z/c3 of size 45mmx100mmx25mm of skf and similar. bearing should be of following makes only-(a) m/s skf/europe/india (b) m/s fag/germany (c) m/s nsk/japan as per bill of material of rdso specification no. rdso/pe/spec/tl/0054-2003 (rev. 0) with amndt. no. 1&2 and rdso letter no. - el/7.1.38/1 dated 21 december 2017 for 4.5 kw brushless alternators.

CTN :44481349

24 Mar, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of v-deep groove type six groove alternator pulley 25 kw,110/130 volt dc brushless alternator suitable for c-122 v-belt driven system as per rdso drg. no. skel-3645 (rev.-4) 2014, conforming to rdso specn. no. rdso/pe/spec/ac/0056-2014 (rev.-1) & rdso spec. no. elps/spec/tl/13 march-1998.

Central Government/Public Sector

CTN :44482194

30 Apr, 2026 NA

Hubli - Karnataka

Tender For supply of 4.5kw brushless alternator including rectifier cum regulator along with belt tensioning device for 110v dc train lighting system as per rdso specn no.rdso/pe/spec/tl/0054-2003 rev '0' with amendment no.1&2. each set consists of (a)one alternator with 2nos of safety chains(b)one alternator pulley with securing nut & locking arrangement(c)one rectifier cum regulator(d)crimping socket for alternator and regulator for outgoing/incoming cable(e)one tensioning gear assembly(f)one langer pin to suspend the alternator(g)one axle pulley,2nos rubber pads and fasteners etc(h)one instruction manual.

CTN :44445050

03 Apr, 2026 NA

Meerut - Uttar Pradesh

Tender For expression of interest for procurement of spares of tatra 815 euro version engine - shaft sealing g 60x80x13/ retainer seal, outlet insulation, top rubber seal (valve), sink screw, screw m5x10, clutch booster, hex nut m8 is:1364 (part-iii) 8-1983/ nut plain hexgon, diode, screw, m s nut, sealing ring 30x36, is:3175- 74 al, lock washer, hex hd screw m8x22 is:1364 (part-ii) 8.81983/ screw wood, clamping strip 9x235 csn 02 2757, gasket (6264001), gasket 0.5mm, sealing ring 33x3.2, hex hd bolt m10x85 is:1364 (part-i) 8.8-1983, sealing ring 33x3.2, clip for accelerator rod spring, shaft sealing a/bswfld 40x52x7 fpm 8015, clutch carrier, gasket 0.25mm, hose 100mm, hose 13x300 csn 137821.1, oil supply tube, lh, repair kit set (turbo blower rh & lh), clamping strip 9x235, gasket (06825-43), intake hose, alternator clamp, hose clamp / clamp, front cover, shim for engagement clutch bush, washer, self lubricating bushing, insulation tube, brush (443930151937), hose 36/46 l=45mm, shaft sealing 45x68x12.5, lock washer, sealing ring, spring washer, gasket, plain washer, sealing ring 25x21, sealing ring 14x20, washer 7.6/20x1.5 mgn 19.05.60/01.221, water proof starter motor 5.8kw/24v, hex hd screw m6x12 is:1364 (part-ii) 8.8-1983/ screw machine (106 103 140 611), gasket 0.50 mm, gasket 0.25mm, neck 20 csn 13 7854.22, plug, gasket (6264001), gasket 3 mm, hex hd bolt m 8x28 is:1364 (part-ii) 8.81983, tube, gasket 0.5mm, discharge tube, tube, hex nut m8 is:1364 (part-iii) 8-1983, shaft sealing gpv 30x55x9, is csn 02 9401.0, shaft sealing gpv 30x55x12, is csn 02 9401.0, spacer washer 0.05mm, gasket 0.5mm, gasket 0.25mm, gasket 0.25mm, hose rptu 127150 27/37, 420mm, lever pin, gasket 0.25mm, parallel key 6h9x6x25 is:2048-1983, directing sheet, clip for accelerator rod spring, gasket 0.25mm, shaft sealing a/bswfld 40x52x7 fpm 8015, gasket 0.25mm, gasket 0.25mm, hex hd screw m12x55 is:1364 (part-i) 8.8-1983, hose 100mm, gasket 0.25mm, hose 13x300 csn 137821.1, repair kit set (turbo blower rh & lh), gasket (06825-43), sealing ring 55x5 csn 02 9281.2 / sealing non-metallic round section, sealing washer, lid, needle bush hk 3520, sealing washer, spacer washer, front cover, rear cover, insulation, holder, outlet screw, resistor, washer, washer, self lubricating bearing 443932000210, holder, insulation, hex hd grease nipple 16m10x1 / fifting lubrication, insulation tube, holder, brush (443930151937), outlet screw, washer, insulation, clamping strip 9x360, shaft sealing g 60x80x13 / retainer seal (101-521-017-317), gasket, hose 36/46 l=45mm, 1.5 electric teflon insulated wire, eyelet round shape no 10, male female eyelet, adopter of steering pump, plug for front housing, fastening plate, bushing, washer 1.5mm, sealing ring 14x20 is: 3175-74 cu, sealing ring 28x2, intake valve guide, distance washer injectors (thicness 0.10 mm), cam shaftbush (thick), cam shaftbush (thick), sealing ring 120x3, sealing ring 25x21, gasket, sealing ring 11x7, screw, gasket, pin (304 002 3200), discharge tube, oil supply tube, washer, lock sheet 32, lock ring 24 is:3075 (part-i)-1986, gudgeon pin (304 3006), hose clip, lock washer, cover, plug m18x1.5 ona 1913.05, ring, self lubricating bearing, slotted nut m32x1.5, spacer washer 1.0 mm, nut plain hexagonal, hex hd bolt m 12x90, spacer washer 0.3mm, spacer washer 2.0 mm, ball bearing (6306), ball bearing (6303), gasket 0.25 mm, sealing ring 36x44, is 3175-74 al, lock ring 20 csn 022925.1, spring washer 22 is:6735-72, sealing ring 24x30 is:3175-74 al / sealing ring metal, hose l=180mm, clip 9 csn 02 2753.5, gasket 0.25mm, stud c m8x25 is:1862 -1975- 8.8, stud c m8x30 is:1862 (part ii)-1975- 8.8, clamping strip 9x235 csn 02 2757, hose holder, hose holder, gasket 3 mm, hose 25/35 l=90mm, sealing ring 20x26 is:3175-74 cu, plug, hex hd bolt m10x85 is:1364 (part-i) 8.8-1983, spacer washer 0.10mm, sealing ring, sealing ring 08x12, is:3175-74 cu / sealing ring metal, spacer washer 0.10mm, intake valve line, ball bearing 6206a

Central Government And Public Sector

CTN :44308545

13 Mar, 2026 1.15 Lacs

Koraput - Odisha

Tender For repair and maintenance of different capacity (up to 63 kva) dg sets for various telephone exchanges & bts sites under koraput ba ( sh :- rewinding and repairing of 62.5kva alternator at telephone exchanges malkanagiri with associated works and replacement of damaged engine radiator for 15kva dg set at bts motu)

CTN :44397641

18 Mar, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot miscellaneous scrap - sc. coach brushless alternator 4.5 kw, 110 volt, dc, v-belt driven, with or without pully, visaually perfect or open in condition, approximately copper content may be 9 kg in each alternator. location: - north side steel yard (beside road) lbpl, dbaw,gst 18%, tcs-1 %,hsn-85016100, allocation-20714208