Latest building alteration work Tenders | Government building alteration work Tenders

Central Government/Public Sector

CTN :40330612

11 Jun, 2025 37.97 Lacs

Faizabad - Uttar Pradesh

Tender For corrigendum : tender for supply of supply of bakelite sheet with 1nos of 6a dp mcb and stud type connector suitable for 4cx 6sq mm cable complete as required. , supply of 25w led street light luminiare with pre die cast aluminium housing and ip 66 protection , pf greater than equal to 0.95 , thd less than 10 percent , cri greater than equal to 70 as per technical specification complete as required. , supply of lt power cable of 1.1 kv grade of following sizes aluminium conductor xlpe insulated pvc sheathed armoured cable confirming to is 7098 part-i-1988 with upto date ammendment as required. a) 3.5 c x 95 sq. mm , supply of lt power cable of 1.1 kv grade of following sizes 4c x 6sq.mm(copper conductor) , supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket , bend , couplers etc. conforming to is 14930 , part ii complete with fitting and cutting , jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. a) 63 mm dia (od-63 mm & id-50 mm nominal) , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. a) above 35sq.mm and up to 95 sq mm , laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1kv grade of following size in the existing rcc/gi/hume/metal/hdpe pipe etc. as required. b) up to 35 sq mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. a) 3.5c x 95 sq.mm , supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. b) 4c x 6sq.mm(copper conductor) , itc of gi octagonal pole of following length in reinforced cement concrete 1 ratio 2 ratio 4 (1 cement 2 coarse sand 4 stone aggregate 40mm nominal size) foundation i/c excavation and refilling etc. complete as required a) 5 mtr. height , itc of 30w led street light luminiare on existing pole bracket i/c connection with 1.5sq.mm frls copper wire complete as required. , earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. , providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut , bolt , spring , washer excavation and re-filling etc. as required. , earthing with g.i. earth pipe 4.5 metre long , 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. , providing and laying earth connections , from earth electrode with 6 swg dia , g.i wire in 15mm dia , g.i pipe from earth electrode including connection with g.i. thimble excavation and re-filling as required. , providing and fixing 6 swg g.i. wire on surface or in recess for loop earthing alongwith the existing cable as required. , design , fabrication , supply , installation , testing & commissioning of outdoor feeder pillar , cubicle type , made out of 2 mm thick crca sheet , totally enclosed , ip 55 , free standing , floor mounting , dust and vermin proof , indoor , compartmentalised , suitable for operation on 3 phase and neutral , 415 v , 50 hz ac system , including internal wiring with suitable size wires/cable , interconnection , duly powder coated painting etc. , including supply & installation of following switchgears , metering instruments and accessories in the feeder pillar as required as per attached boq in atc , shifting of 5 mtr height str

CTN :40568370

23 Jun, 2025 NA

Dimapur - Nagaland

Tender For supply of shelter part , double sleeping bunk , bed side locker , ordinary portland cement grade 43 , coarse sand , 20mm stone aggregates , 40mm stone aggregates , hardcore 63mm stone aggregates , pcc solid block , mild steel tmt bars 8mm dia , mild steel tmt bars 10mm dia , glazed ceramic coloured tiles , non-skid ceramic coloured tiles , ply wood 12mm , balli 100mm dia , wooden runners , nails , binding wire , vitreous china water closet orissa pattern , pvc flushing cistern of 10 ltr capacity , cp cast copper alloy bib cock long body 15mm , cp cast copper alloy pillar cock 15mm bore , cp cast copper alloy stop cock concealed type 15mm , cp cast copper alloy angle cock type 15mm bore , cp shower rose 75 mm dia with swivel arm 15mm , cp towel rail 600 mm long 20mm dia with bracket , stainless steel peg set of 5 , soap tray chromium plated standard pattern , vitreous china wash hand basin , pvc connection pipe 450mm , pvc frame looking mirror , staging for water storage tank , triple layer hdpe water storage tank , ppr tank nipple 25mm diameter , float valve brass 20mm with complete set , ppr pipe 25mm diameter , ppr elbow 25mm diameter female threaded , 25mm diameter ppr elbow , ppr tee 25mm diameter , ppr socket 25mm diameter , ppr gate valve 25mm diameter , ppr union 25mm diameter , ppr reducing elbow 25 to 20mm diameter , ppr pipe 20mm diameter , ppr tee 20mm diameter , ppr elbow 20mm female threaded , ppr 20mm diameter elbow , ppr socket 20mm diameter female threaded , ppr pipe suitable for fixing of 20mm diameter , ppr pipe suitable for fixing of 25mm diameter , ppr pipe end cap 25mm diameter , ppr pipe cap 20mm diameter , thread gola , pvc pipe 110mm dia 3m long with socket , pvc floor trap ahani trap 110mm , pvc cowl 110mm dia , pvc bend 110mm bore , pvc tee 110 mm bore , anaerobic frp lldpe septic tank 1000ltrs , soak pit chamber , wood screw , gi saddle u clamp for gi pipe 15mm bore , gi saddle u clamp for gi pipe 20mm bore , integral water proofing compound , white cement , lime unslacked , mason thread , teflon tape , white zinc , solvent cement , powder coated aluminium drapery rod 25mm , powder coated aluminium brackets for drapery rod 25mm dia , powder coated aluminium end cap studs , gi earthing plate , common salt , charcoal , gi wire 4mm , ci cover 5mm thick , gi funnel with wire mesh , rawl plug , screw steel full threaded 32 mm , gi pipe 20mm , gi pipe 50mm , led batten surface , pixel bulk head fitting in deep drawn anodized , ceiling fan 1200mm sweep with electronic , exhaust fan 300mm sweep , pvc insulated sheathed unarmoured cable , porcelain insulating hangers , pvc copper conductor cable of size 1sqmm , pvc copper conductor cable of size 1 point 5sqmm , pvc copper conductor cable of size 2 pont 5sqmm , pvc copper conductor cable of size 4sqmm , modular switch piano flush type 6 amps , modular switch piano flush type 16 amps , modular socket outlet multi purpose , surface mounting plastic boxes for switches 12 module , surface mounting plastic boxes switches 8 module , surface mounting plastic boxes for switches 6 module , surface mounting plastic boxes for switches 4 module , combined cover plate with frame for switch socket of 12 module , combined cover plate with frame for switch socket of 8 module , combined cover plate with frame for switch socket of 6 module , combined cover plate with frame for switch socket of 4 module , blanking plate for switch socket , ceiling rose with square box surface bakelite , pvc flexible ribbed pipe 20mm dia , pvc conduit pipe 20 mm dia pvc conduit pipe , pvc elbow for 20 mm dia pvc conduit pipe , pvc space bar saddles for 20 mm dia pvc pipe , pvc coupler for 20 mm dia pvc pipe , pvc tee for 20 mm dia pvc pipe , pvc casing capping 25mm , pvc coupler for 25mm casing capping , pvc tee for casing capping 25mm , pvc socket for casing capping 25mm , pvc elbow for casing capping 25mm , pvc corner bend for casing capping 25mm , pvc casing capping 32mm , pvc coupler for 32mm

CTN :40013359

04 Jun, 2025 10.43 Lacs

Baramulla - Jammu And Kashmir

Tender For bid to ras supply of pre fabricated store shelter made up of steel structure of size 18.30m x 6.10m x 3.00m clear height up to ceiling level with partition walls , fire extinguisher of capacity 6 kgs along with its accessories confirming to is 13849 two nos with each shelter , lightning conductor will be provided as under and stores are as per appx f , manufactured sand m sand conforming to is 383 1970 specifications for coarse and fine aggregates. , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded , aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded , bricks common burnt clay building bricks sub class b modular , glass dividing strips 40x4mm , prefabricated foundation reinforcement type f 2 made of 12 mm and 10 mm , form work type 2 timber form work material for columns of size 0.3 x 0.3 x 0.9m , ms clamp made of ms flat 40 x 4 mm 200mm long bent in l shape with two holes , pvc ceiling rose 2 obliq 3 terminal. , led tube light fitting complete 4 feet long 18 watt tube rod and electronic ballast , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core aluminum conductor , cable pvc insulated and pvc seathed 1.5 sqmm single core with copper conductor suitable upto 1100 v conforming to is 694 1990 , modular switch one way 6 amps one module conforming to is 3854 1966. , ms screw 20 mm full threaded per pkt 100 nos conforming to is 723 1972 , ms screw 25 mm full threaded per pkt 100 nos conforming to is 723 1972 , tape insulation 2 cm width 10.00mtr long isi marked , mcb single pole 230v ac 50 hz 6 amps 10ka conforming to is 8828 1996 iec 60898 2002 suitable for lighting and other domestic loads. , mcb distribution boards in sheet metal enclosure 4 ways single door with blanks conforming to is 8623, , residual current circuit breaker with overload and short circuit protection double pole 32 amps , modular socket 6a 2 obliq 3 pin combined 2 module , white cover plate with frame 2 module , white cover plate with frame 4 module , metal flush box 2 module , metal flush box 4 module , pvc casing caping pipe 25mm x16mm conforming to is 14927 part ii , pvc casing caping l bend 25mm conforming to is 371 1979 , pvc casing caping elbow 25mm dia conforming to is 9537 part iii 1983 , pvc casing caping t 25mm for conduit pipe , pvc casing caping square box 4 inch x 4 inch , drilling machine bosch gbh 2 26 re sds plus 2 mode rotary hammer drill 800 watts 26mm electrically driven. make bosch. , sieve for sieving fine and coarse agg 900 x 1500mm made of angle iron frame with stand. , aluminum straight edge 50mm square 2mm thick 1800 mm long , wooden flat gurmala , water levelling pipe pvc 100 mtr , hand rivet gun machine , tasla iron 18 , shovel with wooden handle , brick hammer 1.2kgs , cutting plier insulate 6 , screw driver 12 inch with insulated plastic handle , hacksaw frame with 2 blade , drill bit 6mm dia , drill bit 8mm dia , drill bit 10mm dia , hand gloves insulated with rubber , tape measuring metallic 30m , mason trowel karchi , axes picks with wooden handle , fawda with wooden handle , crowbar 5 feet long , rammer with wooden handle of wt 5 10 kg , pipe wrench 12 inch , pipe wrench 18 inch , aluminum spirit level 6 inch , brick line , spanner adjustable 12 inch

CTN :40065767

04 Jun, 2025 12.05 Lacs

Baramulla - Jammu And Kashmir

Tender For bid to ras supply of living shelter 10 to 12 men - pre fabricated shelter made up of steel structure and hybrid pir panels in wall , fire extinguisher of capacity 2 kgs along with its accessories confirming to is 13849 two nos with each shelter , heating device kerosene based two nos heating , lightning conductor. lightning conductor will be provided as under and stores are as per appx e and drg at appx f sheet 10 10 , aggregate 20mm. stone aggregate to be crushed rock , aggregate 40mm. stone aggregate to be crushed rock , manufactured sand m sand confirming to is 383 2016 specifications for coarse and fine aggregates , bricks common burnt clay building bricks sub class b , white cement make- birla white jk cement acc packet 01 kg , water proof floor silica panels of size 600 x 600 mm with minimum thickness of 10 mm , non skid ceramic tiles coloured 7 to 8 mm thick in floors etc , prefabricated foundation reinforcement type f 2 made of 12 mm and 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups including cutting bending , form work type 2 timber form work material for columns of size 0.3 x 0.3 x 0.9m and columns footing of size 0.9 x 0.9 x 0.3 m , rapidite quick setting liquid. , ms clamp msde of ms flat 40 x 4 mm 200mm long bent in l shape with two holes of 12mm dia on each end. 04 x nut and bolt of size 10 x 50 mm with washer. , pvc ceiling rose 2 obliq 3 terminal make anchor pilot 3 plate , led tube light fitting 1 x 18w 4 feet long complete with all , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core aluminum conductor for working voltage up to and including , cable pvc insulated unsheathed single core flexible copper conductor 1100v grade of size 1.5 sqmm , cable pvc insulated unsheathed single core flexible copper conductor 1100v grade of size 2.5 sqmm conforming to is 694 1990 , cable pvc insulated and pvc sheathed 1100v grade twin core with stranded aluminium conductor confirming to is 694 1990 of size 4 sq mm , flexible wire pvc insulated twin core twisted of size 22 0.0076 with copper conductor. , modular switch one way 6 amps one module confirming to is 3854 1966. , ms screw 20 mm per pkt 100 nos confirming to is 723 1972. , ms screw 35 mm per pkt 100 nos confirming to is 723 1973. , insulation tape 2 cm width 10 mtr long isi marked make steel grip. , mcb single pole 230v ac 50 hz 6 amps 10ka confirming to is 8828 1996 iec 60898 2002 suitable for lighting and other domestic loads. , mcb single pole 230v ac 50 hz 16 amps 10ka confirming to is 88281996 iec 60898 2002 suitable for lighting and other domestic loads. , mcb distribution boards in sheet metal enclosure 8 ways double door with blanks confirming to is 8623 , residual current circuit breaker with over load and short circuit protection dp 32 amps , modular switch one way 16 amp 1 module , modular socket 6a 2 obliq 3 pin combined 2 module , modular socket 6a 16a 2 obliq 3 pin combined 2 module , white cover plate with frame 3 module , white cover plate with frame 6 module , metal flush box 3 module , metal flush box 6 module , compact street light luminaire with deep drawn housing complete along with single 36w fr l , pvc casing caping pipe 25mmx16mm confirming to is 14927 part ii , pvc casing caping l bend 25mm confirming to is 371 1979 , pvc casing caping elbow 25mm dia confirming to is 9537 part iii 1983 , pvc casing caping t 25mm for conduit pipe , pvc casing caping square box 4inch x 4 inch , plastic body exhaust fan 250 mm sweep with louvers , plastic body wall mounting fan 450mm sweep , two tier sleeping bunks as per drawing attached to be provided by vendor the vertical head leg side in duble portion of size 1950x950mm shall be made of 32 mm , waste bin 120 ltr dim 480 x 550 top o.d. colour dark brown make nilkamal or equalent , plastic chair with handrest model dynasty dim 570 w x 593d x 890h. colour dark brown make nilkamal or equalent , cup board model freedom fmdr 1b dim 595 w x 354d x 1450 h colour

CTN :40572426

05 Jul, 2025 38.00 Lacs

Sagar - Madhya Pradesh

Tender For inviting rates for construction material supply for financial year 2025-26 - inviting rates for construction material supply for financial year 2025-26, boulder with spreading 0.75 to 20 c.m., fata with spreading rubble stone, soft murrom with spreading, hard murrom with spreading, bajra with spreading, course sand sand, fine sand barman sand, crusher stone duststone dust, 06 mm metal crushed. metal, 12 mm metal crushed. metal, 20 mm metal crushed. metal, 40 mm metal crushed. metal, 90 mm metal crushed. metal, flag stone 50 mm to 100 mm thick flag stone, flag stone 150 mm to 200 mm thick dasa, bricks (fly ash)8 x 4 x 4, bricks (local)9 x 4 x 3, half round r.c.c. pipe150mm dian.p.-2, half round r.c.c. pipe250 mm dian.p.-2, half round r.c.c. pipe300 mm dian.p.-2, half round r.c.c. pipe450 mm dian.p.-2, r.c.c. hume pipe300 mm dian.p.-3, r.c.c. hume pipe450 mm dian.p.-3, r.c.c. hume pipe600 mm dian.p.-3, r.c.c. hume pipe1000 mm dian.p.-3, r.c.c. hume pipe1200 mm dian.p.-3, r.c.c. cement pole2.40 m hight, r.c.c. cement pole3.0 m hight, barbed wire steel9.38 k.g. per 100r. m., wire mesh (steel)50x50 mm strengthing 4mm with nut bolt baser, angle iron all size mild steel, steel bar all size up to 25 mmmild & torsteel, winding wire, stainless steel febrication work with fixing labour charge, steel door & windows with all fittingsangel iron 30x30x5 mm flat iron 25x5 mm sheet 18 gauge, collapsible shutter with all fitting (steel), iron chamber/drain grill (complete spot fitting with labour), corrogated g.i. sheet0.63 mm0.63 mm, cement p.p.c. isi markisi mark 50kg beg, cement o.p.c. isi markisi mark 50kg beg, centring shutering with fitting and cartling below plinth level, centring/shutring with fitting & cartingabove plinth level, putty double coat with finishinglabour, roller machine with diesel & operetor, 16 to 18 mm thik plan white marble/green marble/zebra black marble/red marble, 25mm thick kota stone, 16 to 18 mm thick granite stone of any colour and shade, vetrified tiles60 x 60 cm 10mm thick 15:15622, glazed tiles300 x 300 mm 10 mm thick 15:15622, tiles / marble fitting labour charge, pvc floor carpet, w.c. 580 x 440 mm with footrest & p-trap with fittingodisa petarn, w.c. european type with fittingisi marked white solid plastic seat and lideuropean type, w.c. european type with fittingisi marked black solid plastic seat and lideuropean type, chequr tiles with fitting18 to 20mm thick ordnory cement, m.s. tube steel frame febrication work including all fitting labour charge, m.s. angle steel frame febrication work including all fitting labour charge, providing and laying cement concrete m20 grade work with required & equipmentlabour, aluminium fram work complete (glass/acp sheet/grill), hydra machine, poclain machine, water proofing treatment on roofs of slab by cement slurry mixed with water proofing compound complete, wall painting with plastic emulsion paint of approved paint, removing white or colour wash by scrapping and sand papering complete, distempring with oil bound distamper water proof paint complete, repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq mm including cutting the patches in propper shape, providing & fixing granite bhumipujan / lokarpan patthar with photo and writing work complete, providing and fixing on wall wallpaper complete, providing and fixing 12 mm toughened glass with accessories labour fitting complete, providing ply 19 mm thick, providing and fixing mica sheet complete, providing carpentar for furniture work, providing and fixing 60 mm thick paver block 30 n/sqmm, brick masonary work with open bhatta complete, statue colour paint complete, water proofing treatment on roofs of slab by asian paint, indigo, etc with water proofing compound 3 layer with crakseal, putty, labuar complete, pvc pipe 3 inch dia 4kg/cm2, marble chips flooring completed work with material labour, pvc pipe 3 inch dia 4kg/cm2 elvo

CTN :40563355

05 Jun, 2025 8.19 Crore

Tikari - Bihar

Tender For state scheme (nabard) /25-26/tikari /01 - 1) name of work: construction of high level rcc bridge over morahar river in between mahiyarpur to kurmawaan, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diasmeter all complete job as per specifiactions and direction of e/l, providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m30 mechanically mixed concrete in abutment shaft & pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 .all complete job as per design upto 5 m height, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications. elastomeric bearing & pad, providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :--furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach s

CTN :40563359

05 Jun, 2025 5.77 Crore

Jhanjharpur - Bihar

Tender For state scheme (nabard)/25-26/jhanjharpur/01 - 1) construction of hl rcc bridge in karhara to malleh road over bhutia balan river-ch-2.10 km, earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. upto 3.000 m depth, providing and constructing temporary island 16 m diameter. all complete job as per specifications and direction of e/i., providing service road etc. all complete job as per specifications and direction of e/i., providing steel liner 6 mm thick for piles including fabricating and setting out as per detailed drawing., bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., dismantling of reinforced concrete pile head complete as per drawing and technical specification, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., cement concrete for reinforced concrete m - 35 in pile cap complete as per drawing and technical specification, supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete as per drawing and technical specifications., providing rcc m-30 mechanically mixed concrete in sub structure with stone aggregate 20 mm nominal size and clean coarse sand of fm-2 all complete job as per design upto 5 m hieght, supply fitting & fixing elasto-meric bearing & seismic pad :-- supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weep holes in abutment cap with 100mm dia ac pipe:-- providing weep holes in brick masonry/plain/ reinforced concrete abutment, wing wall/ return wall with 100 mm dia ac pipe, extending through the full width of the structure with slope of 1v :20h towards drawing foce. complete as per drawing and technical specifications., supplying, fitting and placing hysd bar reinforcement in substructure complete as per drawing and technical specification., back filling behind abutment, wing wall and return wall, complete as per drawing and \technical specification.(sandy material ), providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in ci. 2504.22 of morth specification of not less than 600mm behind abutment, wing and return wall to the full height compacted., providing rcc m 30 grade & super structure :-- furnishing and placing reinforced/ prestressed cement concrete in super-structure as per drawing and technical specification beyond 5 m and upto 10m hieght (t beam slab), providing hysd bar in all types of rcc work:-- supplying, fitting and placing hysd bar reinforcement in super-structure complete as per drawing and technical specifications ., wearing coat :-- providing and laying cement concrete wearing coat m-30 grade including reinforcement complete as per drawing and technical specifications, providing rcc m30 grade in railing:-- construction of precast rcc railing of m30 grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical rcc post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications., providing drainage spout:-- drainage spouts complete as per drawing and technical specification, providing pcc m15 grade below approach slab:-- pcc m15 grade leveling course below approach slab complete as per drawing and technical specification, providing pcc / rcc m30 in approach slab:-- reinforced cement concrete approach slab including

CTN :40563360

05 Jun, 2025 8.02 Crore

Kishanganj - Bihar

Tender For state scheme(nabard)/25-26/kishanganj-2/02 - construction of rcc h.l. bridge in t05 to raipur to jharkhuda path (mmgsy) ch-0.030 km, h.l. bridge work, foundation, excavation for structures, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material., i) upto 3m depth, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., ii. pcc grade m-15 (levelling course for pile cap), r.c.c. grade m 30 in pile foundation complete as per dwg & tech specification., pile cap in rcc m-30 (using batching plant, transit mixer and concrete pump), bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., ii. 1200 mm dia (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, providing steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing, providing and constructing temporary earth island (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth, providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth, carrying out load test on any pile as per standard procedure laid down in the is:2911 specification including construction of test cap, dismantling the cap after test and cleaning the site and maintaining complete records of load, a) initial load test on test pile for 2.5 times the design load specified in drawings, 1.2 m dia pile, b) routine pile load test on pile for 1.5 times the design load specified in drawings, 1.2 m dia pile (2% of piles in total)., c) horizontal pile load test on pile for 1.5 times the design load specified in drawings, 1.2 m dia pile (2% of piles in total) ., substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specification, i) upto 5m height (using batching plant, transit mixer and concrete pump), ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), r.c.c. grade m-35 in substructure complete as per dwg & tech specification, ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8, i) sandy material, providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, superstructure, providing and laying reinfo

CTN :40563358

05 Jun, 2025 7.15 Crore

Kishanganj - Bihar

Tender For state scheme(nabard)/25-26/kishanganj-2/01 - construction of rcc h.l. bridge in malgachh to lat at ch.-0.600 km., h.l. bridge work, foundation, excavation for structures, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material., i) upto 3m depth, providing and laying of pcc m15 levelling course 100mm thick below the pile cap., ii. pcc grade m-15 (levelling course for pile cap), r.c.c. grade m 30 in pile foundation complete as per dwg & tech specification., pile cap in rcc m-30 (using batching plant, transit mixer and concrete pump), bored cast-in-situ m35 grade r.c.c. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m., ii. 1200 mm dia (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, providing steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing, carrying out load test on any pile as per standard procedure laid down in the is:2911 specification including construction of test cap, dismantling the cap after test and cleaning the site and maintaining complete records of load, a) initial load test on test pile for 2.5 times the design load specified in drawings, 1.2 m dia pile, b) routine pile load test on pile for 1.5 times the design load specified in drawings, 1.2 m dia pile (2% of piles in total)., c) horizontal pile load test on pile for 1.5 times the design load specified in drawings, 1.2 m dia pile (2% of piles in total) ., substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specification, i) upto 5m height (using batching plant, transit mixer and concrete pump), ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), r.c.c. grade m-35 in substructure complete as per dwg & tech specification, ii) from 5m upto 10m height (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8, i) sandy material, providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, superstructure, providing and laying reinforced cement concrete in superstructure complete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5, ii. rcc m-30 (using batching plant, transit mixer and concrete pump), supplying, fitting and placing hysd bar reinforcement (fe 415) in superstructrue complete as per drawings and technical sp

State Government

CTN :40557170

14 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of providing and fixing for exavation for sit gravl soft murum , providing and fixing soling using 80 mm size trap metal in 15 cm , providing and laying cast in situ ready mix cc in m10 of trap gneiss metal , providing and laying in situ ready mix m20 cc of trap gneiss metal for approach slap , providing and fixing wid cutting transverse contraction joints 3 to 4 mm wide and depth 60mm , providing and fixing of contraction joints polysuphide sealent , supplying and steaking hrd murum kankar at the site, including conveying , providing and fixing in position tmt or equi fe 500 bars reinforcement of various dia , providing and spreading hard and soft murum gravl or kankar for side width complete , providing and fixing heavy duty inter locking c rubber mould glossy paveen blocks , providing for removing cement tiles, or marble or polished shahabad floor , providing and laying vitrified rustic matt stone finish tailes having size 590 mm to 605 mm x 590 mm to 605 mm , providing and fixing fals seiling of 12 mm thick laminated board with frame , providing and fixing in position, acoustical panelling made from fabric wrapped compressed polyester fibre nonwoven 9 mm , toughened glass 12 mm , providing and fixing kouch set 311 brown and cream leather dimension length 182.5 cms breadth cms 100 cmsheight cms 100 cms weight kilograms 66 kilogram , providing and arrangemnt of high back, synchronized mechanism with multiple locking, adjustbl armrest, gaslift for sit height adjustment, standard 5prong pornylon base with leatherite upholstery , executive tbl at 2250lx2100dx750ht including low height credestal at 1200lx450dx650ht providing and fixing of tbl at 2250lx2100dx750ht top , providing and fixing rollar blinds ami make or approved make and shade of 38mm round aluminium channel with blackout fabric and telting with chain ball system with all necessary fixtures and fitting , providing and arrangemnt of mid back, normal syncro mechanism , fixed armrest , gaslift for sit height adjustment, standard 5prongornylon base with leather upholstery

Building Alteration Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government