Building Partition Tenders

Get complete information related to latest Building Partition Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Building Partition Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Building Partition Tenders .

Filter

Loading....

Get Tender in Email

Central Government/Public Sector

CTN :36239726

14 Jun, 2024 10.01 Lacs

Haldwani - Uttarakhand

Tender For supply of type a treatment in transmission studio, sound lock, voiceover booth and other technical area at air haldwani as per drawings and respective layout drawings , type b treatment in transmission studio, sound lock, voiceover booth and other technical area at air haldwani as per drawings and respective layout drawings , type c acoustic treatment in transmission studio, sound lock, voiceover booth and other technical area at air haldwani as per drawings. work include fixing of 32 nos. of 2ft x 2ft led light fittings. , providing, fabrication and fixing of cedar or teak wood skirting 150 mm x 13 mm and wooden planks 91 mm x10 mm as per drawing , providing, fabrication and fixing of observation window between studio and cr room at air haldwani as per drawing no. sg 10001 size1830mm x 915mm lxh , wooden surface to be cleaned and wooden putty to be applied and after rubbing with sand paper to smooth the surface two or more coat of wooden polish to be applied in wainscot and doors etc. , supply and fixing of 150 mm wide gypsum cornice as per approved profile at all around c type treatment. , supply and applying of wall finish, putty and pop on walls to make smooth finish for premium emulsion paint after touching on corners etc as required for water based luxury emulsion on these surfaces , supply and applying of primer and wall putty on tiles, treatment and walls etc. at technical area. then apply 2 to 3 coats of water based luxury emulsion on these surfaces. , providing and fixing of ms pit cover of size 4ft x 3.5ft with ms frame made up in 50mmx50mmx5mm angle iron and 5mm chequered plate in 3 openable pieces includes primering and painting of the cover , fabrication and fixing of powder coated aluminum partition with 5mm thick clear glass with beading on the top side of the partition and the bottom side of partition with novapan at technical area. , providing and fixing of nomenclature or sign marker for earth pits at air haldwani , providing, laying and fixing of 4mm thick pvc flooring in technical area by using suitable adhesive for bonding after cleaning and making the uneven surface to even suitable for the said scope. , providing the opening size 3ftx2ft on vertical cement concrete wall above false ceiling for ac duct by dismantling the wall and making the hole for size in complete neat finish with plastering

CTN :36235875

12 Jun, 2024 83.72 Lacs

Mumbai - Maharashtra

Tender For supply of wooden an aluminium partition for heritage building- provide and fix 4mm plywood with one side decorative veneer is 1328 type 1 for lining or cladding with screws, including priming coat on exposed surfaces, with approved veneer facings. , provide woodwork in frames of doors, windows, and clerestory windows, wrought, framed, and fixed with hold fast lugs or dash fasteners. second class teak wood. lugs or fasteners paid separately , install 35mm thick teak wood shutters for doors, windows, and clerestory windows with required hinges and screws, as directed , install bright-finished brass butt hinges with all necessary screws , install bright finished brass tower bolts with all necessary screws , install bright finished brass hanging type floor door stopper with all necessary screws , install aluminium work with dash fasteners, epdm fill, powdercoated, 50 microns thick , complete structural steel work, including cutting, hoisting, fixing in position, and applying approved steel primer, either with or without connecting plate, in a single section , complete structural steel work, including cutting, hoisting, fixing, and priming, for riveted, bolted, or welded built-up sections, trusses, and frames. , all welding cutting hoisting fixing and priming for built up sections or framed work including stair stringers treads and landings with chequered plate where necessary provided as a complete package , install 10 x 160 mm carbon steel galvanized dash fastener with double threaded 6.8 grade, including drilling as directed by engineer-in-charge , apply two or more coats of synthetic enamel paint from an approved brand to achieve an even shade on new work , polish woodwork with high gloss or matte finish melamine clear polish to achieve desired color and texture , providing and fixing 6 mm thick toughened plain glass of approved pattern and design in wooden partition and door including all necessary scaffolding etc as directed by eic , providing and fixing 6 mm froasted or etched glass of approved pattern and design in wooden partition and door including all necessary scaffolding etc as directed by eic. , providing and fixing 600 mm long bright finished brass tower bolts heritage design with necessary screws and fittings all inclusive as per directions of eic. , providing and fixing finished brass aldrop of 350 by 220mm heritage design with necessary screws and fittings all inclusive as per directions of eic. , provide and install a 250mm finished brass door handle heritage design , including all necessary screws and fittings, as directed by the eic. , install 12mm marine plywood for partition or door paneling with cutting, screws, scaffolding as per eic , providing and fixing teak wood beading of size 40mm x 12mm approved pattern or design to partition and door with necessary screws,plugs, etc all complete as per directions by eic. , provide and fix heavyduty aluminum die-cast body tubular type universal door closer, isi embossed, for doors up to 80kg and 1200mm width, with necessary accessories and screws, as directed by eic-

Central Government/Public Sector

CTN :36227477

25 Jun, 2024 NA

Kapurthala - Punjab

Tender For supply of honeycomb partition frame set with al fr hpl sheet for lhb scn coach as per technical specification no mdts-097 rev. 01 in which hpl sheet should be as per m dts-26337 rev. 00 instead of mdts-086 noted in clause 2.3, as per drawing: mp24hplhoneyco m version 0, packing instruction no.pi118 ver1.0 : honeycomb partition frames: 1 each honey comb partition frame to be wrapped individually in hdpe sheet for moisture proofi ng 2 the partition frames to be layed in staggered manner in the wooden case, so t hat joint of one frame does not fall exactly over the joint of another frame whic h is placed just above or below it. suitable cushioning material should be used in c orners and sides to protect the edges of honeycomb partition frames and materia l should be closely packed. 3 one package should not contain material belonging t o more than one coach set and grouping should be prefered of similar sizes. 4 woo den case to be used for packing of not more than five layers of partition frames p er case. the case to be made of atleast 25 mm thick wood on the four sides with atle ast 10 mm thick wood covers on top and bottom. 5 wooden logs of atleast 75x75 mm to be provided across the top and bottom covers at diatance of not more than 800 mm depending upon the size of the packing. these are required for strengthening of the covers and to provide access for the forks of the fork lift trucks for han dling within rcf. 6 each packing to be marked with permanent marker on four sides or alternatively a packing slip covered in waterproof polyethene can be fixed on a ll four sides indicating contents i.e drg no. and qty ; supplier identification, po no a nd date. also packing should have indication like ?,2/4 etc ( i.e 4 packings will make 1 s et_ so that one complete set can be easiliy identified. 7 besides above guidelines , su pplier to ensure by suitable means that the material packed should remain intact d uring transit and opened storage in rcf. [ warranty period: 84 months after the date of delivery ]

CTN :36187973

05 Jun, 2024 NA

Goa - Goa

Tender For supply of fitment of accessories in washroom of naval war college - mirror for wash basin led 4inchx8ft 6mm , fully automatic shoe polish machine with sensor activated and 02 color dispenser , apron self water proof with nwc logo , heavy duty door closer for washroom with 10000 minimum operation , decorative posters with frame size 13inch x 17inch , foot mat anti-skid and water absorbent size 3ft x 2ft , customized under console resistance water waste wash and bin individual partition and basin termite with wood finish paneling inside with tandem box , door stopper floor mounted with chrome finish , acrylic foldable screen for ladies washroom size 6ft x 8ft , towel for washroom size 132.1x71.1cm , towel for washroom size 75x150cm , towel for washroom size 60x40cm , hand towel size 27x27 cm , sanitary napkin destroy

CTN :36090848

15 May, 2024 NA

Delhi - Delhi

Tender For repair and renovation of office in centralvista project division xiii at sunehri bagh road new delhi - dismantling wooden boardings in lining of walls and partitions , excluding supporting members but including stacking within 50metres lead . thickness above 10 mm up to 25 mm , providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. kiln seasoned and chemically treated hollock wood , providing and fixing plywood 4 mm thick , one side decorative veneer conforming to is 1328 (type-1) , for plain lining / cladding with necessary screws , including priming coat on unexposed surface with . decorative veneer facings of approved manufacture , providing and fixing wooden moulded beading to door and window frames with iron screws , plugs and priming coat on unexposed surface etc. complete . 50x12 mm , melamine polishing on wood work (one or more coat). , providing and fixing 25 mm thick shutters for cup board etc. glazed shutters . second class teak wood including isi marked anodized aluminium butt hinges with necessary screws , providing and fixing isi marked flush door shutters conforming to is 2202 (part i) decorative type , core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including isi marked stainless steel butt hinges with necessary screws , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1.5.10 (1 cement . 5 coarse sand (zone iii) derived from natural sources . 10 graded stone aggregate 40 mm nominal size derived from natural sources) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1.2.4 (1 cement . 2 coarse sand(zone iii) derived from natural sources . 4 graded stone aggregate 20 mm nominal size derived from natural sources) , providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 and conforming to is 15622 , of approved make , in all colours and shades , laid on 20mm thick cement mortar 1.4 (1 cement . 4 coarse sand) jointing with grey cement slurry 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. , complete. size of tile 600x600 mm , providing and fixing in wall lining high density high moisture resistant hdhmr fibre board marked , pre-laminated one side decorative lamination and other side balancing lamination , with necessary fixing arrangement and screws etc. complete. 18 mm thick. , providing and fixing false ceiling at all heights with accoustic false ceiling tiles of size 595x595 mm in 15mm acoustic tiles with fabric finish made of polyfibre core with density 180 kg/m3 having nrc( noise reduction coefficient) 0.5 and thermal insulation properties make armstong , saint gobain (gyproc) anakon , anutone true horizontal level suspended on inter-locking metal powder coated t-grid of hot dipped galvanised iron section of 0.40 mm thick on silhouette profile , rotary stiched double webbed white with 6mm reveal profile (white/black) , comprising of main-t runners of size 15x42mm of length 3000 mm , cross - t of size 15x42 mm of length 1200 mm and secondary intermediate cross-t of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm , suspended from ceiling using galvanised mild steel items (galvanizing 80 grams per sqm) i.e. 50 mm long , 8 mm outer diameter m-6 dash fasteners , 6 mm dia fully threaded hanger rod upto 1000 mm length and l-shape level adjuster of size 85x25x2 mm. galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs a

Loading, Please wait...

Building Partition Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector