Latest bull ring Tenders | Government bull ring Tenders

State Government

CTN :39963111

28 Apr, 2025 14.96 Lacs

Barkot - Uttarakhand

Tender For supply of t and p material for use in line work under deposit head in the area of edd barkot - electrical items :, earthing rod ms 20x2500mm-d, 11 kv hand gloves, safety helmet, allen key kit, conductor/belt cutter 42 inch, screw driver 8 inch, screw driver 14 inch, high insulated plier, screw driver with phase tester, chain pully 5 ton, crimping machine up to 400 mm al lugs, rain suit, led torch with electric charging, gum boot, reflector jacket with upcl monogram, chain saw upto 18 ft, d-spanner set, analog megger 5000 v, ring spanner set, (max puller)turfer tractel 3 ton, aluminium foldable telescopic ladder, earth chain (brass), tong tester digital

Central Government/Public Sector

CTN :39986333

21 Apr, 2025 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of keeper plate (hy-924.17) as per drg. 46118802055/01 with matl as per specn. aa10108/11 , welded plug (hy-204.06) - as per drg. 46116200749/04 with matl as per specn. aa10111/06 , thrust housing cover (w.shaft) var-01 as per drg. 36117600007/09 with matl. as per specn. aa10119/15 , pipe spacer (hy-045.08) - as per drg. no. 46127600059/04 with matl. as per specn. aa10152/07 , bull ring retainer (hy 356 05) as per drg 46119600371 01 with matl as per specn. hy10199/03 , deflector link lever var-03 as per drg. 36139600305/04 with matl. as per sepcn. aa10119/15 , oil pump keeper (hy-170) - fully m/cd item as per drg. 46117600002/01 with matl as per specn. aa10119/15 , bearing spacer (hy-358.00) - as per drg. 36100000666/03 with matl as per specn. aa10119/15 , brg. sleeve (hy-102.00) - fully m/cd item as per drg. 46137600121/00 with matl. as per specn. aa10119/15 , spring adj. bolt seat (hy-103.00) - fully m/cd item as per drg. 36137600072/02 with matl. as per specn. aa10119/15 , trunion bushing ret. (hy-903.05) -- as per drg. 36108802024/02 with matl. as per specn. aa10119/15 , modified hinge gate and hinge blade (hy-504.04.b) as per drg. 16515600070/01 with matl as per drg. , brg. guard l nut hy-040 00 fully mcd item as per drg 36137600081 01 with matl as per specn aa10119 15 , taper pin dia 26x255 (hy-206.03) as per drg. 46137600119/01 with matl as per specn. aa10208/07 , bowl hub key (hy-178.0) - fully m/cd key as per drg. 46117600030/02 with matl. en-9 , hinge gate shaft (hy-504.17) as per drg no 36515600176/02 with material as per drg.

Central Government/Public Sector

CTN :39986711

21 Apr, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of air seal ring upper (hy-357.00) as per drg. hy-357. c with matl as per specn. aa19511/09 , bowl hub cover hy-028.00 as per drg 26117600138-c with material as per spec aa19511/09 , rough m/cd bull ring clamping hy-912.00 as per drg 16118801041-c with material as per spec aa19511/0 , journal bearing spacer hy- 902.06 as per drg 36108802029-c with material as per spec aa19511/09

Central Government/Public Sector

CTN :39962945

19 Apr, 2025 NA

Hyderabad - Telangana

Tender For supply of grinding rolls and bull ring segments

Central Government And Public Sector

CTN :39978436

01 May, 2025 34.81 Lacs

Kaiga - Karnataka

Tender For supply, fabrication, welding/joining, erection and testing of hdpe piping from kgs 3 and 4 to kaiga 5 and 6 area. - supply items (schedule-a), 100 nb equal tee sch 40 astm a 234 gr. wpb sml bw ansi b 16.9, 1oo nb sorf flange 150 # astm a 105 ansi b 16.5, 100 nb blind flange 150 # astm a 105 ansi b .16.5, 100 nb gate valve manual op. flange end 125/150 # sa 216 gr. wcb ansi b 16.34, 100 nb ball valve manual op. flange end 125 /150# hdpe, suit to 100 nb,sa 105, 150 # ansi b 16..5 back ring flange, flange end mechanical type flow totalizer 150# (range 150000 to 200000 cu. mtr.capacity) to suit to 100 nb sa 105 flange 150 #, ansi b 16.5. flow meter totaliser specification, dn-110 hdpe pipe is 4984 gr. pe 80 pn 6, dn-110 hdpe 90 degree elbow, is 4984 gr. pe 80 pn 6 as per is 8008, dn-110 pipe /stub end, 1s 4984 gr pe 80 pn 6 as per is 8008., 100 nb cs back ring flange astm a 105 as per ansi b 16.5 150#, dn-110 hdpe equal tee, is 4984 gr.pe 80 pn 6, as per is 8008, dn-50 hdpe cap, is 4984 gr. pe 80 pn 6, as per is 8008., hexagonal headed bolt, nut with washer 85 mm long is 1363 gr. 6.3 /is 3757 gr. 8.8, ismc 100 is 2062 , e 250 gr. a, 12 mm thick plate is 2062 , e 250 gr. br, 110 nb ms u clamp 25 mm wide x 3.5 mm thick, 100 nb m 12 u bolt is 2062 e 250 gr. a, m 10 x 100 hst/faz, 1.6 mm thk caf gasket 100 nb is 2712 gr. w/3, erection item (schedule-b), butt fusion welding / joining and laying of dn- 110 hdpe pipe, is 4984, grade pe 80, pn 6 both under ground and above ground., butt fusion welding / joining and erection of dn-110 90 degree elbow, hdpe, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of both end), butt fusion welding / joining and erection of dn-110 hdpe equal tee, is 4984, grade pe 80. pn 6 ( inclusive of welding/fusion of three end), butt fusion welding / joining and erection of dn-110 hdpe pipe end /stub end is 4984, grade pe 80. pn 6, butt fusion welding/joining and erection of dn-50 hdpe cap is 4984 grade pe-80 pn-6, installation of 100 nb hdpe ball valve without welding., fabrication , erection , welding, inspection,surface cleaning & supply and application of hb chlorinated rubber zinc phospate primer paint in two coats to minimum 100 micron dft and supply and application of hb chlorinated rubber finish paint in two coats to 60 micron dft for cs structural steel support and components., installation of anchores m10 x 100 mm hst/faz including handling,scafolding,labour & tools., removing & reinstallation of precast concrete slab 0.3 m (l) x 1.350 m (w) x 0.1 m (t), excavation and backfilling of excavated trenches with the soil after completion of installation of pipe lines and testing including levelling/grading, compaction to the required level 1.5 m (d)x 0.8 m (w), sand bedding 50 mm depth x 400 mm width for underground hdpe piping including supply of sand., dismantling of existing dn-50 hdpe piping including breaking of existing cement concrete ( 0.7 cub.mtr) & pcc to be done after breaking and removing of existing cement concrete, including tools, labour & disposing of unservicable material as directed by eic, carefully removing the korean grass along with soil of 100 mm to 250 mm depth and 1500 mm width including replacing the same removed korean grass along with soil after laying hdpe line along with tools & tackles,watering of grass,dressing of area etc.in all complete as per direction of eic

CTN :39986596

30 Apr, 2025 NA

Allahabad - Uttar Pradesh

Tender For supply of lv7 t-815 hmv 443-979-572-681 injection valve va 51s 443a-2681 , lv7 tmb 1466-111-626 camplate , lv7 tmb 2654-5451-0119 combi switch ms harness , lv7 tmb 2610-6710-2319 wind shield glass rh , lv7 tmb 2573- 2520-0108 assy 310 dia clutch disc , lv7 tmb 1467- 030-308 vane pump , lv7 tmb 2786-0198-9906 gasket cylinder head , lv7 tmb 2786-0399-9968 gear fly wheel ring , lv7 tmb 322-280-0821 drive shaft with oil seal ring , lv7 tmb 2573-4620-0108 assy universal joint , lv7 tmb 2786-1899-9914 oil seal , lv7 stln vf x- 2310600 reverse light

CTN :39985949

06 May, 2025 NA

Ernakulam - Kerala

Tender For tender for supply of nut m6x1 grpoint8 , nut m24x25 grpoint8 , stud m12x1point75x45 8point8 , stud , self locking nylock nut m10 , self locking nut , allen screw , socket head cap screw m12x55 12point9 , allen screw , circlip , circlip external , circlip external 45 mm , circlip , circlip external 60mm , circlip external 65mm , circlip external 90 mm , circlip internal 90mm , banjo bolt , plain machined washer m10 , copper washer 10x14 , copper washer , copper washer 12x16 , copper washer 12x18 , copper washer 14x18 , washer copper , copper washer 81x22 , copper joint , washer copper , washer copper , joint , copper washer , copper washer 30x36 , washer copper , copper washer 60x68 , schnor washer , ball , spring dowel pin , mech dir pin , spring dowel pin , spring dowel pin , spring dowel pin 17x30 , intermediate ring , round seal ring , round seal ring , inlet valve , o ring giesunger coupling , ring ms 29513 126 60c7 nse 6point531 , gasket for glacier filter gf600 11 , set of seal for glacier filter , rocker arm bush , o ring an33 7pb 496 , disc spring washer , locking plate , piston ring , locking disc , locking plate , gasket ring , gasket ring , gasket pn16 dn100 type 01a , cover with gasket ring , gasket ring , o ring , hex headed screw , hex headed screw , gasket , gt2 coalescer filter panel , seal tape roll , spares kit contg bearing mech seal gas o ring and rv spr , main bearing assly , shim , thrust bearing reinforced , bearing opppointside to timing gear , bearing , pinion , serrated shaft , gov driving gear pinion , ball bearing skf 6212 , ball bearing skf 6209 , pair of bevel gears , shim , cup plug , serrated bush , oil seal , pair of bevel gears , shim

CTN :39983579

28 Apr, 2025 5.99 Lacs

Rupnagar - Punjab

Tender For procurement of different types of spares for wet ash handling system of stage ii and iii at ggsstp ropar. - lantern ring for clinker grinder, material gun metal as per sketch a ., wear ring for clinker grinder, material ss-304 as per sketch b ., bearing housing expansion type for clinker grinder of ci grade 220 is-210 as per sketch c , nozzle tip of material ss 410, hardness 525 bhn along with nozzle plate of ms as per is 2062 for stage iii and as per sketch d , intermediate wear piece for stage-iii hydro ejector material alloy c.i nickle min 4.5% as per is 4771 type1 (a) hardness min 500 bhn as per sketch e., 200 mm inlet piece for hydro ejector of bottom ash hopper of stage-ii & iii. material alloy c.i as per is 4771,type 1(a),nickle min.4. 5%, hardness min. 500 bhn as per sketch f , nozzle tip of material ss 410, hardness 525 bhn along with nozzle plate of ms as per is 2062 for stage ii and as per sketch g , jointless shaft sleeve for clinker grinder as per sketch h.material ss-304, alloy steel 1 x1 roller type simplex chain of pitch 1 , width 1 (min) between inner plate, roller dia. =25.4 mm, no. of rollers = 98 length= 12 3 for clinker grinder of stage- ii& iii., adaptor for power cylinder, material - gun metal as per sketch i, spherical roller bearing 22317 e1k (brass cage) with sleeve h2317, lock nut km17, lock washer mb17, jointless shaft sleeve for asp d-85 & d-85 d as per sketch j. material ss-304, jointless shaft sleeve for asp cd-135 as per sketch k. material ss-304

CTN :39690834

21 Apr, 2025 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of bowl extension ring segments and bull ring clamping ring segments for hp-1103 bowl mills

CTN :39724420

18 Apr, 2025 70.00 Lacs

Puducherry - Tamil Nadu

Tender For corrigendum : supply of consumables/non-consumables for the department of pharmacology. - chemicals, acetylcholine chloride (ar grade), ammonia (ar grade), ammonium acetate (lc-ms grade) sigma, ammonium thiocyanate acs grade, ammonium thiocyanate ar grade, ascomycin (reference standard powder) sigma, atropine sulphate (ar grade), benzoic acid sigma acs reagent, >99.5% (sigma), bismuth sub nitrate (ar grade), bratton marshall reagent (ar grade), calcium chloride (ar grade) powder, carbamazepine (analytical standard) sigma, chloroform hplc (ar grade), cobalt nitrate (ar grade), concentrated hydrochloric acid (ar grade), concentrated nitric acid (ar grade), cyclosporine a (analytical standard) sigma, dextrose (ar grade) powder, diazepam (analytical standard) (sigma), diclofenac (ar grade), edta (ar grade), ethanol absolute, ferric chloride (ar grade), ferric nitrate (ar grade), formic acid lc/ms grade (98- 100%), glacial acetic acid (hplc grade), isopropyl alcohol (hplc grade), magnesium chloride (ar grade) powder, mercurric chloride (lr grade), morphine sulphate (pure powder), ninhydrin (ar grade), orthophosphoric acid (ar grade), papaverine pure powder (ar grade), phenobarbitone (phenobarbital) (reference standard powder) sigma, phenytoin (reference standard powder) (sigma), potassium chloride (ar grade), potassium dihydrogen orthophosphate (ar grade), potassium hydrogen phosphate (ar grade), potassium hydroxide (ar grade), potassium iodide (ar grade), potassium permanganate (ar grade), pottassium dihydrogen phosphate (ar grade), quality controls for estimating carbamazepine in human serum using uplc, quality controls for estimating cyclosporine in human whole blood using lc-ms, quality controls for estimating phenobarbitone in human serum using uplc, quality controls for estimating phenytoin in human serum using uplc, quality controls for estimating tacrolimus in human whole blood using lc-ms, quality controls for estimating valproic acid in human serum using lc-ms, sodium bicarbonate (ar grade), sodium chloride (ar grade), sodium hydroxide pellets (ar grade), sodium nitrite (ar grade), sodium salicylate powder (ar grade), sodium valproate/valproic acid sodium (reference standard powder) (sigma), strychnine pure powder (ar grade), sulfamic acid (ar grade), sulphuric acid (ar grade), tacrolimus (reference standard powder) (sigma), trichloro acetic acid (ar grade), valproic acid- d6 solution (sigma), zinc sulphate sigma, solvents, acetonitrile hplc grade, acetonitrile lcms grade, ethyl acetate (ar grade), glycerine (ar grade), methanol (ar grade), methanol (hplc grade), methanol (lcms grade), plastic wares, 15ml pp conical bottom tube (tarson) (pack of 20), 50ml pp conical bottom tube (tarson) (pack of 10), centrifuge tube rack (polypropylene) - 15ml capacity (min. 30 places), centrifuge tube rack (polypropylene) - 50ml capacity (min. 10 places), centrifuge tube stand (15 ml capacity) (12x3 holes, aluminium), cuvetes (plastics) 2ml, membrane filter, nylon 0.45 , 47mm (pack of 100), micro tips (200-1000 l) (white) (pack of 1000), microcentrifuge tube (1.5 ml) with flip cap, sterile, pp (pack of 500) (preferred make; abdos/tarson), microcentrifuge tube (2 ml) with flip cap, sterile, pp (pack of 500) (preferred make; abdos/tarson), microtips (0.2 - 10 ul) (white). (pack of 1000) (preferred make; abdos/tarson), microtips (2 - 200 l) (white). (pack of 1000) (preferred make; abdos/tarson), nitrile gloves (purple, size-large) (pack of 100), nitrile gloves (purple, size-medium) (pack of 100), pasteur pipette - plastic, 3ml sterile (pack of 100), screw capped polypropylene 2 ml storage vials (pack of 100), stir bar, magnetic teflon coated, reusable (8 x 30mm), storage bottles, graduated, clear with pp screw cap and pp pouring ring (blue), autoclavable upto 140 c, size: 1000ml (borosilicate glass), storage bottles, graduated, clear with pp screw cap and pp pouring ring (blue), autoclavable upto 140 c, size: 100ml (borosilicate glass), sto

Bull Ring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector