Latest bullet proof door Tenders | Government bullet proof door Tenders

Corporations And Associations And Others

CTN :41506708

27 Aug, 2025 15.01 Lacs

Delhi - Delhi

Tender For upgradation of mandcw center b-block for ayushman aarogya mandir by providing aluminum partitions, paint work etc. in camp no.04, ward-45, m-ii/rz

Central Government/Public Sector

CTN :41507722

10 Sep, 2025 4.22 Lacs

Porbandar - Gujarat

Tender For defect rectification on various electrical and hull defects onboard icgs c-445 - h-215: 04 in nos partition to be provided in computer rack for storage of file and books. in way jobs include;-(a) relocation of television.(b) 04 nos partitions in ss rack., h-212:08 nos ladder steps in main alleyway ladder found cracked and worn out. steps to be renewed with anti-slip grips as per sample. nut bolts of steps to be renewed.qty -08 nos, material-al., h-217: 01 in no sofa for sitting arrangement in wardroom to be fabricated and fitted. job include:(i) fabrication of 01 in no sofa as per sample.(ii) fitment of sofa in position.(iii) removal and fitment of existing fitting racks.(iv) fabrication of sofa covers. (v) rearrange of dining table. sofa size- 2500 x 500 x 350 mm, l-077: base plate, rotary volume switch socket and junction box of 02 in nos main broadcast system speakers at bridge top and quarterdeck deteriorated due to weathering. mb speakers to be disconnected from junction box and fabrication of base plate, socket and junction box to be carried out, connectorisation of speakers to be done and mb system to be proved for satisfactory operation. specifications of base plate, rotary switch and junction box are as follows:- (a) base plate- 24cmx14cmx10cm, mat-ms is- 513, powder coated.(b) junction box- 9.5cmx8.5cmx6.5cm, mat- ms is-513, powder coated.(c) rotary volume switch-1 pole, 5 way, h-216: chalk test of main engine ventilation flap air tight door observed suboptimal. minor crack and pitting observed on aluminium flap and frame. defect to be rectified by renewal of ventilation flap including cutting and metal buildup of frame. chalk test to be proved. in way jobs includes removal, fitment, machining, welding of door and frame. door size-(1000 x 2000 mm). ventilation door -01 no, mat - al., h-218: aluminum rack for storage in waterjet compartment to be fabricated as per sample. material-aluminum. size- (l x b x h) (3ft x 2ft x 1ft)., h-219: storage box to be fabricated for storage of machinery spares in waterjet compartment (mat- al, qty - 01 no, size - 100 cm x 50 cm x 50 cm)., 01 in no ba controller board to be fabricated as per sample. material : wood/ sunmica.

CTN :41509996

25 Aug, 2025 2.97 Lacs

Mahabubabad - Telangana

Tender For supply and fixing of aluminum partitions at government general hospital building at mahabubabad in mahabubabad district.

CTN :41453903

25 Aug, 2025 NA

Navsari - Gujarat

Tender For expression of interest for providing, making and supplying furniture & furnishing items at all centres of navsari agricultural university (unit rate offer) - providing, supplying & installation of snap-fit modular wall paneling using 8mm pre-laminated cement fiber board the framework shall consist of 0.55mm thick cold-rolled g.i. perimeter channels (30x27x20mm) fixed at 600mm centers with nylon sleeves and wood screws. w shaped ceiling sections (26x50x26x80mm, gyptech or equivalent) shall be inserted horizontally and vertically to create a 600x600mm grid (or as per design) and fixed using appropriate screws.work includes marking levels on walls/partitions as per design, leaving allowance for panel thickness. installation shall use 8mm thick wood-textured pre-laminated cement fiber boards (make approved by nau authority) fixed in a modular snap-fit system.packing of solid pvc/marine ply to be provided as required. aluminum grid sections (24x9mm) extruded from 6063 grade alloy shall be fixed to the ceiling section, or directly on the wall/partition where space constraints exist. panels will be secured using 14x13mm snap-fit powder-coated or anodized aluminum clips. all work to be executed in true line and level, with approved finish and as per directions of engineer-in-charge., providing, supplying & installation of 12mm x 120mm prelaminated solid core wall paneling work includes providing and installing 12mm thick x 120mm wide prelaminated solid core wall panels (e-3 clad) with a seamless joining system. wall/surface to be prepared and marked for alignment and design. a grid of 50mm x 15/20mm solid pvc strips (density 550600 kg/m) shall be fixed to the wall at 600mm x 600mm spacing using screws. panels shall be mounted using double-sided adhesive tape and silicone adhesive (dow corning or equivalent). all work shall be completed in true line, level, and finish as per design and instructions of the engineer-in-charge., providing, supplying & installation of vox / pare brand thermal printed wall & ceiling paneling work includes supply and installation of 3mm thick x 340mm wide vox/pare brand thermal printed panels approved by nau authority) with a tongue-and-groove joining system for ceiling and wall paneling. levels shall be marked as per design, allowing for panel thickness. 0.55mm thick g.i. perimeter channels (30x27x20mm, make approved by nau authority) shall be fixed to walls/partitions at 600mm centers using nylon sleeves and wood screws. a 1200x1200mm hanger grid shall be marked on the ceiling/slab. 0.55mm thick g.i. hangers (18x18mm), cut 6" longer than the drop, shall be fixed to the slab and intermediate channels using self-drilling screws. 0.9mm thick c-sections (15x45x15mm) will be suspended at 12001500mm centers. overlaps of 6" shall be provided for extended lengths. 0.55mm thick w-sections (26x50x26x80mm) shall be fixed perpendicularly at 450600mm centers to form the ceiling grid. panels will be screw-fixed to the frame with longitudinal alignment across ceiling sections. panel joints will be finished using matching brand j sections (19x40mm) or connector profiles (76x12mm). all joints and caps will be bonded with cyanoacrylate adhesive (make approved by nau authority). work must be executed in true line, level, and finish as per approved design and under the supervision of the engineer-in-charge., providing, supplying & installation of snap-fit modular wall paneling using 12mm prelaminated wood chip particle board work includes installation of 12mm thick prelaminated wood chip base particle boards (make approved by nau authority) in a modular snap-fit paneling system. mark levels on walls/partitions as per drawings. fix 0.55mm thick g.i. perimeter channels (30x27x20mm, make approved by nau authority) at 600mm centers using nylon sleeves and wood screws. install 0.55mm thick w shaped ceiling sections (26x50x26x80mm) vertically and horizontally to form a 600x600mm grid, or as per design, secur

Central Government And Public Sector

CTN :41330549

26 Aug, 2025 1.77 Crore

Chittorgarh - Rajasthan

Tender For biennial contract for maintenance of aluminum partitions, false ceiling, flooring, door and window shutters, paneling and other miscellaneous civil works at raps-5and6, plant site.

Central Government And Public Sector

CTN :41344719

16 Aug, 2025 1.98 Lacs

Lucknow - Uttar Pradesh

Tender For rearrangement of existing aluminum partitions for ladies retiring room and mobile project staff room at 1st floor in te building mahanagar lucknow.