Get complete information related to latest Bulletproof Vest Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bulletproof Vest Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bulletproof Vest Tenders.
Tender For a) scope of work covers supply, installation and commissioning of total 12 nos.of 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit-5&6 with required pcs, electronic modules, splitters, modems, junction boxes, mounting kit, enclosures, interconnecting cables, software and all other accessories required to make the system complete and fully functional, shall be provided for continuous level measurement and monitoring of level of each coal bunker and also to ensure satisfactory performance of the system commissioned at rtps site which shall be on the basis of single point responsibility, completely covering the activities and services in respect of all the equipment works specified and covered under the specifications. the work involves i) installation and commissioning of 12 nos. 3d radar level type level transmitters with suitable mounting accessories, display indicators, isolators, annunciator, smps, terminals, panel internal wiring, led bulbs, door switch etc. at the bunker level ii)commissioning of rs 485 communication /other cables from bunker level transmitters to the desktop pc at u-5&6 control rooms.iii)commissioning of desktop pcs for 3d multi vision for monitoring of all the 12 bunkers level at u-5&6 control room respectively and also both units bunker levels at pc being installed at chp control room. iv)loading of all the required licenced software to the desktop pc for 3d radar level transmitter and cable routing, glanding, mounting of cable tray, termination and ferruling is in the contractors scope.cable trays will be provided by m/s.kpcl.b)all fabrication works required for installation and commissioning of instruments with jbs,protective cover/canopies and allied works are in contractor/agency scope itself.c) all civil works like drilling/cutting rcc floors,grouting,refilling floors,conduiting under ground cables cable tray mounting, masonary works are in contractor/agency scope itself.d)storage of materials while executing works is single point responsibility of contractor/agency scope itself. e)software details-1. the page containing all bunker level data shall be in full page which must be visible from at least a distance of 6-8mtr .(font size should be more) and shall have a historical trend storage for minimum 45days & real time trend with not less than15min sampling time. f) at chp control room, the existing kpcl pc shall be enabled with bunker level software & shall be communicated through existing lan and as a redundancy the seperate optical fiber cable communication with media convertor has to be provided.the lan cables has to be protected with cable conduit g)materials supply shall be completed in all respect within the stipulated period as per the contract. materials shall be delivered to rtps site through ee(stores)o&m. unloading of materials at rtps site location and shifting of the same to work location is under the contractor/agency scope only. h)handling, shifting, unpacking and erection and commissioning of the entire system shall be under the scope of bidder itself. i)all required consumables, hardware and licenced software, accessories and any other materials which are not included in the scope and required for successful installation and commissioning of the 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit-5&6 are under the contractor/agency itself. j)all the materials required for the installation and commissioning of 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit- 5&6 shall be made as detailed under the technical specifications. k)interfacing of all the bunker level transmitters outputs to the desktop pcs at u-5&6 control rooms through rs - 485 communication protocol.(the required 1 pair x 1 sq.mm shielded armoured cables as per requirements shall be supplied approx-500 meters or if more). for more details of scope of work refe
Tender For purchase of equipments - purchase of equipment, 1. configuration design an 8-channel battery analyzer and its accessories 2. power 425 w3. voltage measuring range: 25 mv to 5 v, discharge minimum voltage: 0v or better, accuracy: 0.05% of fs4. current range: 0.5 ma to 6 a, accuracy: 0.05% of fs or better 5. power per channel output power: 30w, stability; +/- 0.1% of fs or better6. time rise time: 1ms (0~full range)7. frequency 10hz8. charge mode of operation: cc, cv, cccv, cp end conditions: voltage, current, relative time, capacity.9. discharge mode of operation: cc, cv, cp, cr, end conditions: voltage, current, test time, capacity, energy.10. pulse mode charge: cp mode, cc mode, discharge: cc mode, cp mode, min pulse width: 500ms, automated switch: automated switch from charge to discharge for each pulse end condition: voltage, relative time11. dcir support for the calculation of the point of the dcir12. cycle cycles: 1 65500 or better, steps: 250 or better, nested function: max three levels of loops13. protective function software, power-down data protection, user-defined safety (upper and lower) tolerance of current, voltage, and delay time14. channel features independent pairs of closed loops for the constant current source and constant-voltage source15. test reports and curves for analysis different types of curves created by software based on user definition. (voltage-time curve, current-time curve, capacity-voltage curve, loops times charge/discharge capacity curve, loops times charge/ discharge efficiency curve, etc.), data reports created by the software. comparison of the performance of the batteries tested in channels, both visually and statistically16. channels independent control17. ac input ac 220v 10% / 50hz 18. voltage and current testing sample 4 wire connecting 19. noise 85db20. data management mysql database21. communication means tcp/ip protocol22. data output excel, txt23. communication interface ethernet port24. number of channels per cabinet 825. accessories: 1. bi-potentiostat: electrochemical workstation or moduletechniques the system should be capable of running the rde / rrde technique simultaneously cyclic voltammetry (cv) with simulation/fitting programs linear sweep voltammetry (lsv) with stripping bulk electrolysis with coulometry (be) differential pulse voltammetry (dpv) with stripping normal pulse voltammetry (npv) with stripping tafel plot (tafel), potentiodynamic deactivation, pitting corrosion, corrosion rate, linear polarization, corrosion current, etc. multi-current steps (istep) amperometric i-t curve (i-t) lifetime testing open circuit potential time (ocpt) chrono amperometry (ca) chrono coulometry (cc) chronopotentiometry with current ramp (cpcr) potentiometric stripping analysis (psa) auxiliary signal measurement channel ir compensation external potential input galvanostatic charge discharge single/multiple cycle -chrono potentiometry (cp) with potential limits, polarity by potential or time, no. of cycles etc. voltage vs current density curves single or multiple potential steps with charge limits, single or multiple current steps, mixed voltage/current control using macro. i-v measurements, i max, pmax, fill factor, etc.impedance ac impedance (imp) 10 hz to 3mhz impedance time (impt) (mott-schottky) impedance potential (impe) impedance simulator with fitting open circuit potential time (ocpt)hardware specification of bi-potentiostat workstation/ module: potentiostat / galvanostat module, 2- or 3- or 4-electrode configuration maximum potential: 10v, maximum current: 250 ma peak or better and 2 amps with +/-25 volts for higher current measurement. compliance voltage: > 13v or better, potentiostat rise time: 300 ns or better galvanostat applied current range: 3na to +/- 100ma or better and upto 2 amps applied current accuracy: 20 pa or better input bias current: 1 pa or better cv and lsv scan rate: 0.000001 to 10,000 v/s. ca and cc pulse width: 0.0001 to 1000 sec imp frequency: 0.00001 t
Tender For supply and delivery of electrical materials for maimenance of street lights in tadepalli urban 6 to 14, 19 & 20 wards and ippotam, prathuru, chirravuru rural areas under ae-4 section in mangalagiri tadepalli municipal corporation under general funds - "supply and transportation of led driver as per is 15885 (part 2/sec 13) 2012 with input line voltage 120v-270v ac, 50hz with surge protection more than 2.5 kv, ip20,suitable for led indoor luminaire, with 2 years warranty.makes: as per list of recommended brands.elec-3.8.4020w", 36w, "supply and transportation of led driver as per is 15885 (part 2/sec 13). 2012 with input line voltage 120v-270v ac, 50hz with surge protection of 4.0 kv, ip20, suitable for led street light fitting with 2 years warrantymakes: as per list of recommended brands.elec-3.8.4145-90 w", 120-180 w, "supply and transportation of led street light luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120-270v ac, p.f>0.90, high power leds having system efficacy >=120 lumens/watt and junction temperature < 70°c, with ingress protection ip66, luminaire performance complies to is 10322 (part 5/sec-3 3), driver surge protection 4kv, in house additional surge protection 10 kv with optics distribution, thd<10% at 110 volts ac, driver efficiency >90%, cct: 3000k - 5700k, minimum cri>70, etc., complete with earth connection and not less than two years warranty. makes: as per list of recommended brands as category ielec-3.8.2320 w", 30 w, "supply and transportation of ......... led street light luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120-270v ac, p.f > 0.90, high power leds having system efficacy >= 120 lumens/watt and junction temperature < 70°c, with ingress protection ip66, luminaire performance complies to is 10322 (part 5/sec-3), driver surge protection 4kv, in house additional surge protection 10 kv with optics distribution, thd<10% at 110 volts ac, driver efficiency >90%, cct: 3000k - 5700k, minimum cri>70, etc., complete with earth connection and not less than two years warranty.makes: as per list of recommended brands as category ielec-3.8.2490w", 120w, 210w, "supply of wpsc (weather proof single core) isi alluminium wire. makes: gold medal / million/gm/5 vimal/finecab/nakoda/nanadicab/payal, sudhakar/rajrigandha/ airson/orbit/ollvin, elec-1.6.12.5 sqmm wpsc",, supply and delivery of pvc/cotton tape role(8 mtrs) elec-8.1.15, "supply of.......... 10ka c/d curve isi mark.makes: legrand-dx3/schneider-acti9/hager-h3/ siemens-5sx4/ havells stadx/l&t-au/indo asian-opti pro/hpl (techno) elec-2.10.140-63a, sp mcb", 40-63a, tp mcb, "supply of...... porcelain rewirable fuse units.makes: c&s/standard/hpl/sputnik/million/gold medal benlo/anchor elec-2.7.163a, 415v", 100a, 415v, "supply and delivery of pvc box make: sintex including cost & conveyance etc., complete as per lr15"" x 18""" supply and delivery of 8mts pole clamp sets (2no.s per set with bolts & nuts) including cost & conveyance etc., complete as per lr, supply and delivery of spun pole (round) clamp sets (2no.s per set with bolts & nuts) including cost & conveyance etc., complete as per lr, supply and delivery of 1" gi pole brackets (3ft size) including cost & conveyance etc., complete as per lr
Tender For procurement of med stores - patient bib, plastic, pedodontic diamond burs (straight, round, tapered and fissure) set of 40, sheet for vacuum pressure moulding system set of 10 sheets, sintered diamond burs for grinding metal for shp assorted set with minimum 10 componet enlisted (for component see annexure as per rfp), antiseptic oral pain relieving topical gel containing antiseptic and topical anaesthetic in gm or ml tube of 10gm, disposable rvg sensor sleeves (pkt of 1000), intraoral photographic mirror set of 3 with contraster, reinforced quartz fibre post -kit complete (with corresponding drills), flowable light-cure composite kit complete of four syringes of 2-4 gm each with etchant and bonding, vaccum blood collection tubes with needles: sterile tube without gel, 5ml, roxythromycin 50mg/5ml syp in bott of 30 ml, inj methyl cellulose 2% for intra ocular use vial of 2 ml, bisacodyl 5 mg tab, vaccum blood collection tubes with needles: sodium citrate, 3ml, hydrogen peroxide solution with stabiliser ip (20 volume) 500 ml bott, isotretinoin 20 mg cap, hydroxyurea 500 mg cap, azathioprine 50mg tab, leflunomide 10 mg tab, oxytocin 5 units per 1.0ml amp inj, synthetic absorbable polygalactin 910/ polyglycolic acid coated with polycaprolate, size 3-0, 70-90 cm, 1/2 circle rb, 20-25 mm, vaccum blood collection tubes with needles and additives sodium fluoride/sodium fluoride+k3edta in tubes of vol 02 ml, polyamide monofilament, size 1, 100 cm, 1/2 circle rb, 40 mm, polyamide monofilament, size 1-0, 100 cm, 1/2 circle rb, 40 mm, polyamide monofilament, size 2-0, 70-80 cm, 3/8 circle reverse cutting, 40-45 mm, polypropylene blue monofilament, 70-75 cm, size 1-0, 3/8 circle reverse cutting, 12 mm, synthetic absorbable polygalactin 910/ polyglycolic acid coated with polycaprolate, size 1-0, 70-90 cm, 1/2 circle reverse cutting, 30-40 mm, cream luliconazole, tube of 15 gm, bandage elastic adhesive, 6 cm x 3 metres unstretched and 5-6 metres when stretched., metoclopramide syrup 5mg/5ml bott of 30 ml, 10% povidone iodine solution, u.s.p equivalent to 1% available iodine 500ml bott, sheath protective, zidovudine tab 300 mg, metronidazole susp 200 mg/5ml bott of 60 ml, glycerin (glycerol) in bottle of 1 kg, spacer device for inhaler, microtips in closed box of 96 tips, 100 l to 1000 l, pack of 960 tips, syp levosalbutamol 1mg/ 5ml bott of 100 ml, universal single- component, no mix bonding system 4-6 ml with 40-50 applicator tips, multi vit inj iv 2-10 ml with minimum constituents having thiamine (b1)-30mg/ml, pyridoxine (b6) 30mg/ml and (b12) cyanocobalamin-300 mcg/ml, "rubber base impression material kit with accessories, antiseptic oral pain relieving topical gel containing antiseptic and topical anaesthetic in gm or ml tube of 10gm, clindamycin phosphate 1% topical gel tube of 10 gm
Tender For supply of supply of fixed bullet camera , supply of 24 port managed poe switch , supply of work station client pc , supply and installation of surge protective device , supply and laying of cat 6 stp lan cable , supply and connecting of rj 45 connectors , supply of pvc cable casing caping , laying of pvc cable casing caping , supply and installation of licensed software for cctv , installation, testing and commissioning of cctv system , supply of wireless radio system , installation, testing and commissioning of wireless radio system
Tender For corrigendum : supply of sch viii (supply of needle & syringes) - sch viii (supply of needle & syringes), disposable needle sterile length 1/2" guage 25, suture needle, half circle triangular nos. 2 to 20 (cutting), insulated needle for use with peripheral nerve stimulator 22g x 2" x 50 mm., insulated needle for use with peripheral nerve stimulator 22g x 35 mm., insulated needle for use with peripheral nerve stimulator 24g x 1"x 25 mm., echogent needles for usg guided peripheral nerve blocks 20g / 21g x 100 mm., echogent needles for usg guided peripheral nerve blocks 22g x 50 mm., epidural needles 16 & 18 guage 7.5cm to 11cm (disposable), epidural needles (long length) 18g (more than 100 mm. length), sterile disposable lancet size 28-32 (plastic lancet needle type), sterile disposable hypodermic plastic syringe 20cc, cn. with leur lock, hypodermic syringes,disposable sterile, sterile pack,with/without leur lock, hub 1ml syringe with marking at 0.1 ml, asepto syringe 100 ml of heavy plastic barrel and rubber bulb with marking., bag arm rubber with cover for b.p. apparatus, adult size velcro.rubber bag size 13 x 23 cms., keratome, size 2.8 mm, type-regular(ophthalmic), angle-45 degrees, bevel type- bevel up (pointed)blade-stainless steel/carbon steel,handle- polycarbonate, use- disposable single use, mvr, gauge 23g type-regular(ophthalmic), blade-stainless steel handle- polycarbonate, use- single disposable use, triple lumen catheter 7.5fr with 14g distal lumen, length-15cm. kit contain 1 teflon-coated j nitinol guidewire particularly kink-resistant with guide-advancer. 1 dilator, 10cm long, 3 injection caps, 3 clamps,1 supplementary fixation wing,1 scalpel, 1 syringe 5 ml, 1 adaptor for pressure transducer, 1 puncture needle 18g, 70mm long with a pre-connected valve to aviod air embolism and blood loss, 18g short iv cannula, double lumen subclavian/ jugular catheter kit (adult) ptfe (teflon) cannula curved od 2.7/d 11.5fr-12fr/chx5.3in. (3.8 mm x 13.5 cm) 6 side holes silicon tube s clamping extension, clamp luer lock "y" connector with protective caps size 12.5, 15 with guide wire introducer needle, dialator , 3fr double lumen cvc catheter with 60mm double-lumen polyurethane central venous catheter inserted by seldinger technique, radio opaque material for catheter, the user should be able to choose from 2 type of introducer, i.e.needle 23g or i.v. cannula 22g, latex free, the central venous catheter set should contain: 1 double-lumen polyurethane 3fr catheter, 1 short i.v. cannula 22g, 1 introducer needle 23g, 1 kink resistant guidewire with soft flexible tip, dilator with cylindrical /pencil point tip, 1 secondary fixation wing, 2 injection caps, 1 scalpel, 1.5 ml syringe, peripherally placed radiopaque central single lumen catheter. guage 14/16 (100%) (needles size/catheter size) length - 55cm - 70cm, peripherally placed radiopaque central single lumen catheter. guage 18/20 (100%) (needles size/catheter size) length 30cm - 45cm, fully radiopaque pur catheter 16g for femoral artery centimeter marking from 5-15cm, winged hub for skin fixation, supple distal tip. kit should contain 1 pur catheter with xro lines,1 puncture needle, 1 j guidewire with wishbone-type guidewire advancer, 1 dilator, radial/femoral arterial pe catheter with antikinking collar & fixation wings,straight guide wire, introducer needle.catherter size g- 18, length 10cm, radial/femoral arterial pe catheter 20g, 8cm puncture needle is fitted with a visualization chamber allowing to confirm that the vessel punctured is an artery (pulsatile movement of the blood). the needle is also fitted with a silicone bloodless system valve to avoid loss of blood during vessel puncture and a funnel hub to facilitate the insertion of the guidewire, peripherally inserted central catheter with guide wire with peelable cannula, made of polyurethane, non-toxic, with radio opaque line throughout the catheter with marking every cm with leur connector at proximal en
Tender For supply of augmentation of stationery and consumables store d d - modular track mounted glide access with metal cladding , laminated faced composite panel cabinet , block work storage module , aluminium framing with water proof composite finish in fluid panel , sculpted pop grid framework , fitment of flexible poly surface floor covering , fitment of contour profile illumination , in-wall fixed storage bay , recessed downcast cob fixture assembly , graphic art work surface treatment , fixture connection set with routing components , surface routing and insulation kit with accessories , protective oil based surface finish , concealed overhead air circulation 4 ton hvac module , wall rack 8ft height with full back closed 18 inch depth base and 3 inch pillar , gandola double rack , frontal end rack , wall channel rack without base wall hanging , shopping trolley 60 liters , point of issue counter 48 inch , surveillance and recording system , card tap and check out with system , visual display unit 55 inch ) /bid number: gem/2025/b/6740707 * /dated: 24-11-2025 & & / bid document1 / 23