Latest burlap Tenders | Government burlap Tenders

State Government

CTN :40799743

28 Jun, 2025 55.19 Lacs

Raichur - Karnataka

Tender For name of the work major overhauling of 02 nos kt1150 engines and 01 novt28 l engine cummin s make of san locomotives assisting for dismantling of kt1150 and vt28 l engines from the locomotives joint inspection of testing of overhauled engines shall be conducted between kpcl representative and firms representative joint inspection report of testing jirt after completion of re assembly shall be furnished to this office joint inspection of testing may be waived off at the discretion of the undersigned but the test report shall be furnished.removal and re installation of engine. this includes the complete procedure of safely removing the engine from the locomotive and, after completion of the necessary repair or overhaul work, re-mounting the engine back into the locomotive. all required tools, fixtures, lifting mechanisms, and safety measures shall be managed by the vendor.engine alignment process the alignment process involves precise positioning and securing of the engine to ensure correct interfacing with the locomotives drivetrain coupling systems, and support structures this includes, but is not limited to mounting of the engine onto the engine bed frame using proper alignment tools and calibrated instruments ensuring parallelism and angular alignment of the engine relative to the transmission or traction system verifying coupling concentricity and ensuring there is no misalignment that may lead to premature wear vibration or operational issues tightening of mounting bolts to specified torque values and rechecking alignment post tightening conducting necessary trial runs and adjustments if any to confirm proper functionality before final handover all the released items shall be returned in separate packing along with overhauled engines to kpcl

CTN :39038230

03 Jul, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itot in fitter tradeat iti tarsali, gujarat, india (package 4: fitter trade) - ss and sc center lathe (all geared) , design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics. , design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic. , design, supply, installation, commissioning, testing and training of advance factory automation training kits , application learning systems , hydraulic power saw machine , cnc turn centre , universal milling machine with minimum specification , vertical milling machine , cnc machining centre , cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders. , surface grinding machine , universal tool and cutter grinding machine , interchangeable ratchet socket set , hand reamer adjustable cover , hand reamer taper , reamer parallel , set combination , micrometer (0-25) , micrometer (25-50) , micrometer (50-75) , micrometer inside (0-25) , vernier calliper (150mm) , vernier height gauges , vernier bevel protractor , drill twist taper shank , drill chuck , wheel dresser , machine vice (4 inch) , machine vice (6 inch) , sleeve drill morse , bench vice , leg vice , dial test indicator , lathe tools hss tipped set , lathe tools bit hss , counter boring and counter sinking tool , arm strong type bit holder rh , arm strong type bit holder lh , arm strong type bit holder straight , straight edge , surface plate , marking table , universal scribing block , v- block pair , square adjustable , angle plate , spirit level , portable hand drill (electric) , twist drill straight shank , twist drill straight shank , taps and dies complete set , taps and dies complete set , taps and dies complete set in box , pipe wrench , pipe wrench , pipe vice , adjustable pipe tap set bsp with die set cover pipe size , wheel dresser(1for4units) , machine vice , machine vice , sleeve drill (morse taper) , bench vice , leg vice , gauge slip as johnson metric set , carbide wear block , gauge snaps , gauge plug single ended , gauge telescopic , dial vernier caliper , vernier micrometer , depth micrometer , vernier caliper , comparators stand with dial indicator , surface roughness comparison plates , digital vernier caliper , digital outside micrometer , digital dial test indicator , hardness tester , flat tongs , round tongs , straight snips , bend snips , solder bit /soldering iron hatchet type , anvil , swage block , trammel , hand groover , portable forge with hand blower , gas cutting torch with different noses , arc welding table with positioner , gas welding table with fire bricks , grinding attachment for lathe , dial test indicator , sine bar , sine bar , micron suitable to measure minimum 300mm distance. (optional) , surface roughness tester , air conditioner , drilling machine pillar type with drill chuck & key. , pedestal grinder double end type. , power saw machine stroke length160 mm , fly press 4t capacity , arc welding transformer-single phase,200 amps. (with cable, electrode holder and all other accessories) , oxy-acetylene gas welding plant with all accessories , tig welding machine , co-ordinate measuring machine having accuracy of 5 , workbench , special tools and equipment , tool holder to suit the cnc machine (sl. no. 183) for turning, threading (external &internal), grooving (external &internal), parting off operations, drilling, boring, undercutting (with 20 inserts for each operation) , worktable to mount small machines , worktable to mount small machines , worktable to mount small machines , work benches with bench vices , dg set (power backup) , engineering drawing trainees tool kit , air conditioning for classroom , air conditio

State Government

CTN :40371555

25 Jun, 2025 16.39 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : procurement of personal protective equipment for officers and employees of stps, sarni. - personal protective equipment for officers and employees, industrial safety shoes mechanical, industrial safety shoes electrical, industrial safety helmet white colour, safety hand gloves for heat resistance, safety hand gloves for chemical work (acid-alkali proof), safety goggle for dust particles protection, safety mask for coal dust, electrical hand gloves (0.4kv), electrical hand gloves (6.6 kv), electrical hand gloves (11 kv), caution danger ribbon / barricading roll, full face mask with cartridge, safety eye wear for chemical handlng, hand gloves for handling oily surface, ear muff, safety net (10 x20 sq meter), electrical arc flash protection face shield, chemical protection suit

Central Government/Public Sector

CTN :40745842

25 Jun, 2025 NA

Kota - Rajasthan

Tender For supply of refilling of nitrogen gas cylinder-capacity 50 liter, pressure 200 bar +/-10%, scope of work- r efiling of nitrogen cylinder as per rdso specification no rdso /2013cg-069 rev-3 ) or latest with fire rated valve duly certified by peso. refilled cylinder with valves will be provided and empty nitrogen cylinder with fire rate valve will be taken back (inclusive of to & fro transportation cost of nitrogen cylinder wear by suppl ier) make - sanrok or similar. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40705625

23 Jun, 2025 NA

Hapur - Uttar Pradesh

Tender For supply of protective work wear (jacket) (q3)

Central Government/Public Sector

CTN :40388931

24 Jun, 2025 NA

Kanchipuram - Tamil Nadu

Tender For corrigendum : supply of multi pocket work wear for workshop field sea trials.

CTN :40680537

20 Jun, 2025 8.26 Lacs

Aligarh - Uttar Pradesh

Tender For ????? 71 ??? ??? ??? ????? ????? ???? ?? ?????? ????? ???? ?? ???? ? ??0??0 ??? ????? ?? ??????-work of improvement of drain and cc road from upar kot sabji mandi chowki to saudagar fruit wear in ward 71.

CTN :40605937

25 Jun, 2025 NA

Parganas - West Bengal

Tender For purchase of spares e e - screw m8x30 black button head (plate iv ad) , bolt m12 x 30mm (jcb super plate xix d) , set pin gr-8.8m12x40 long , bolt m10 x 100 (plate iii g) , screw socket button head flanged (plate iii o) , stopper plate (plate iv b) , bracket roof liner (plate iv f) , mounting bracket music system (plate iv f) , pressing mounting right hand gas strut (jcb super , nut m5 (plate iv l) , hinge bush , nut rivet m8 (plate iv ao) , washer tab lh (plate vi e) , washer tab rh (plate vi e) , grease nipple 45 degree , nut(b4-4-1) , wear tube(plate-b4-2-1 by 16) , bracket mounting fuse (plate viii e) , back nut(e1-8-11 by 3) , pipe slew (jcb super plate xiii p) , clamp , nut rivet (plate xiii s) , nipple grease (plate xvi f) , o ring (plate xvi f) , ring snap (plate xvi j) , ring masking (jcb super plate xviii e) , circlip external (jcb super plate xviii h) , setscrew m10x1.5x30 (plate xxi c) , retainer spring , plate oil baffle (jcb super plate xxi f) , washer thrust bevelled (jcb super plate xxi f) , tube (jcb super plate xxi h) , nut m14 x 1.5p thin (plate xxiii c) , bolt dowel (plate xxiii d) , virvus ripe bolt (m10 x 25 long ) , plug taper 1 by 4 inch bsp (plate xxi c) , capscrew m6x25mm (plate xxi c) , capscrew m5x 30 (plate xxi c) , mounting bracket music system rh (plate iv f) , washer 1.00 long 51.511dx7600x1.00thk , decal control (plate x b) , neoprene centre bounded mounting , seal , 5 by 8 inch dia , hole dowty seal , bonded w , circlip , imt83.85odx2.79wx62.0id , dowel , plug relief valve (plate xxi c) , thrust washer , o ring seal (price list sl no -24864) , circlip internal(e-2-2-1) , nut (plate-a2-1-1) , bolt m16 x 120 (plate iii l) , pivot cable , bolt m12x90 , washer(plate-b1-3-2 by 7) , label fuse (plate iv a) , coller sealing (plate iv c) , stud ball (plate iv j) , bar window stay (plate iv p) , washer nylon (plate iv aj) , rubber stop 16x6 m6 (plate iv ak) , grease nipple 1 by 4 inch bsp str , pin clevis , spring tension brake pedals (plate x p) , cover (jcb 3dx e1-2-1 sl no 31) , seal bonded (ctlg 3dx f5-5-10) , ring paking , plug (f5-1-1) , washer 1.45 long 51.511dx76.00x1.45 thk , plug detent (plate xxi c) , circlip internal (plate xxi c) , circlip external (f5-1-30 by 14) , knob with switch (plate xg) , washer spherical (plate xxiii d) , strap (plate v v) , plug filler (jcb super plate xviii h) , gear shaft ball washer , clip 11.1-13.1 (plate xxiii a) , circlip , reaction pin , gasket cover plate (plate iii e) , shim , pin brake back-off (jcb super plate xix d) , circlip , int 81.35 odx2.79wwx160.41 id , baffle , adaptor , hose clip(plate-n6-4-1 by 15) , stay door lh (plate iv h) , spring door stay lh (plate iv h) , guard door striker (plate iv m) , stop block rear window (plate iv t) , decal haa rd switch (plate ix b) , ring clamping (plate x j) , plate retaining gaiter (jcb super plate xi c) , circlip e , filter plug , shim kit (3dx) , adapter (plate xix b) , gasket , cap serew m10x30 long , bolt(b4-3-2 by 21) , adapter (plate xv c) , bleed nipple , bolt m16x 75mm (plate iii l) , seal rh rear window (plate iv u) , switch blank , bracket lock assy (plate iii s) , grip (plate iv a) , decal warning (plate iv a) , bracket door stay lh (plate iv h) , gasket door handle (plate iv n) , strap check (plate iv n) , seal lh rear window (plate iv u) , seal stowage rh(plate iv al) , adaptor (plate vi q) , bolt torque 510mm (plate vi y) , nut plain m20 (plate vi y) , actuator switch front work light (plate ix a) , cover hydra clamp switch soft touch (plate ix a) , switch actuator auto (plate ix a) , link loader control (plate x b) , steering mounting (jcb super plate xii e) , clip worm drive 110-140mm (jcb super plate xiii , ring snap (plate xvi n) , nut (1 inch unf) (jcb super plate xix a) , thrust pad , brake , pipe link , banjo bolt(plate-l6-6-1) , link 1.25 ton (plate xxxi y) , buffer (plate iii r) , bracket clamping assy (plate viii e) , bolt (plate xviii l) , bolt gr-8.8 m16x70 long (jcb super plate xix

CTN :40583659

26 Jun, 2025 NA

Multi City - Multi State

Tender For comprehensive maintenance of backhoe loader (amc of backhoe loader make-escort, model-digmax-ii on the basis of pms and service charge with wear and tear parts and as per scope of work).

Central Government/Public Sector

CTN :39963024

30 Jun, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : rate contract for supply of imported spares of caterpillar engines in eastern and northern regions of ongc work centre for a period of five 05 years - resistor, lamp, dm bulk seal, boss, seal, plug-cup, gasket-exhau, filter as, seal, bushing, pin, alternator g, nut, seal o ring, shield as-ma, coupling, adapter, washer, shield as-el, base as o, lamp gp-floo, case, alternator g, rod as-conn, washer, body, nipple, ball, union, washer, seal-lip typ, hsg-regulato, micrometer, gear, pulley, plug-spark, harness a, washer, gasket as kt, seal-lip typ, belt, screw as, bracket, pin, plug as-conn, gear kit idl, head as, seal-lip typ, bolt, elbow-oclr i, ring, wire as, strap-step, block, towel-shop, clip, head gp-cy, head gp-cyl, clamp a, box as, shim gp-gen, bolt, shim-liner s, gasket, pin-spring, bushing, guard-rad lh, terminal kit, fitting, pin, washer, gasket, spacer, spacer as, head gp-cyl, hinge as, clamp, gear, gear, gasket, filter a, plug as, bolt, fluid-urea, orifice, spring, screen, housing as, cap a, shaft as, gasket, guard as-cor, gasket, bonnet, adapter-exh, strap-cable, gasket, insulation, screw, seal o ring, cont gp-elek, cap as, cap a, terminal-dou, cover-air in, packing, gasket, seal-o ring, tool gp, mount, screw, nut, cap a, shim pack, cushion kit, plug a, plug, cap as.-o fl, cap end, shutoff gp-b, kit cover, spring, mount-shock, clip, plug, kit hardware, shell a, guard, manifold gp, frame as-lh, frame as.-rh, spacer, gasket, seal, adapter, core a rad, guard, bracket, washer, roller a, fitting, dowel, seal a, plate, coupling, stand-eng, muffler as, seal-o-ring, seal, shim pack, bolt, bolt, capscrew, race&rlr as, pin-piston, bracket as., bolt, bolt, bolt, gasket, manifold as-, manifold gp, mount, bellow as., radiator kt, base a, elbow, cap a oil, cap oil f, mount, pin, filter a, guard, elbow, cap-wiper, cap as-fill, filter a, mount, bottle as., washer, cap as-fille, tube a, washer, guard-core, gasket, screw-sems, solenoid gp, cap-radiator, gasket kit, guard, bellows as, nut-m40, gasket, washer, guard as, solenoid as, manifold, seal, base-relay, body as-pist, elbow, adapter, coupling, cm-tube stk, cm sleeve bk, kit body, plug, rotocoil a, exciter, turbo gp-bas, ring, turbo g, turbo gp, bracket a, core gp, core as, arm a, sensor, actuator as, cotter pin, harness as, head gp, head gp-cyl, filter a, lockwasher, knob, gasket, radiator gp, element, gasket, harness as, seat wear, gasket, line as, governor gp, line as, cartridge g, elbow, elbow a, exchanger g, filter-fuel, housing a, injector g, lifter as, line as, line as, line as, lubricator g, plunger as, core a, gear, line as, line as, line as, line as, line as, line as, line as, line as, line as, line as, line as, core as-oclr, manifold as, pump gp wtr, sender as, gasket, line as, repair kit, pipe, rack, line as, gasket, valve a, harness as, pump gp, gasket, screw-pan he, gasket, gasket, nut, harness as, valve g, nut, piston as, head gp, valve-exhaus, bolt con rod, guide-valve, bracket, elbow, retainer, gasket, adapter, seal as, elbow, gasket, cover, cover, head as-cyli, liner-cylind, head gp-cyl, rod as-conn, shaft, valve, camshaft a, guard-core, washer, screw, bolt as-conn, cap dust, bolt, shield, gasket, connector, socket-relay, housing, cont gp, cont gp - b, core as-ht e, adapter, housing, turbo gp-bas, cartridge gp, connector, valve gp-fue, retainer, governor g, cont grp, cover, elbow, elbow, housing, elbow, pin, base oil, bracket, elbow, washer, capscrew, cap screw, lockwasher, mount shock, insulator, spring, rod a, ferrule, rotocoil a, spring, mount a, camshaft as, bolt, lock, radiator gp-, guide-valve, valve-intake, retainer a, guide-valve, guide, insert, bolt-groun b, lock, ring-top, insert, ring as pist, ring g, valve, valve, retainer, body assy, ring-piston, piston ring, body as-pist, valve, valve inlet, insert seat, body as-pist, liner cylind, body a, kit-gasket, pin-piston, spring, spring, washer, screw-adj, valve exhaus, kit-gasket-m, guide, sp

Burlap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector