Latest bus trunking Tenders | Government bus trunking Tenders

Central Government/Public Sector

CTN :41304743

23 Aug, 2025 50.00 Lacs

Mathura - Uttar Pradesh

Tender For repair/ maintanance and improvement of lt feeder pillar boxes, lt panels, bus bar panel lt switch gear and other allied works at zone d, omc, 3 rpd, ncc and adjoining area under ge (e) mathura

Central Government/Public Sector

CTN :41153370

09 Aug, 2025 45.00 Lacs

Dibrugarh - Assam

Tender For corrigendum : repair maintenace of lt electric supply, distribution network including replacement of unsv cable joint kit, bus bar junction box, change over switch and connected items at dibrugarh, ganeshbari, chabua, fsd panitola and laipuli area under ge dinja

CTN :41287395

08 Aug, 2025 6.06 Lacs

Chandigarh - Chandigarh

Tender For replacement of electrical accessories, ceiling fan and tube lights in inspection bungalow building, sector 19 chandigarh. - dsr item no. 1.10 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required., group c, dsr item no. 1.15 rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm. frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /pvc conduit including dismantling as required., group c, dsr item no. 1.21 supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., 20 mm, 25 mm, dsr item no 1.17 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required., 3 x 1.5 sq. mm, 3 x 2.5 sq. mm, dsr item no.1.24 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required., 5/6 a switch, 3 pin 5/6 a socket outlet, dsr item no.1.25 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required., dsr item no.1.26 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required., dsr item no.1.27 supplying and fixing following size/ modules, gi box along with modular base & cover plate for modular switches in recess etc. as required., 1 or 2 module (75 mmx75 mm), 3 module (100 mmx75 mm), 4 module (125 mmx75 mm), 6 module (200 mmx75 mm), 8 module (125 mmx125 mm), 12 module (200 mmx150 mm), dsr item no.1.31 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required., dsr item no.1.32 supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 a & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required., dsr item no.1.57 supplying & fixing suitable size gi box with modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, "c" curve including connections, painting etc. as required., dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, dsr item no.2.5 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer) as required (note: vertical type mcb tpdb is normally used where 3 phase outlets are required)., 8 way (4 + 24), double door, s/i/t/c of 1x18/20watt. led box type fittings made of crca sheet with 1 nos. led tube rods. the fittings should be installed on existing surface. the led tube rod should be of philips/ wipro/ havells/ bajaj/ crompton/ trilux/ panasonic/ lt/ jaquar/ surya make of polycarbonate material only. (as per complete item no. 14 of the dnit)., s/i/t/c o

Central Government/Public Sector

CTN :41040033

08 Aug, 2025 21.00 Lacs

Jodhpur - Rajasthan

Tender For corrigendum : conversion of overhead lt lines to ug cables incl provn of bus bar chamber and all connected accessories at mil stn under age (i) udaipur

Central Government/Public Sector

CTN :41122849

08 Aug, 2025 48.30 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : repair/maint of apfc panel/ lt panel/ bus bar mccb/ oh line with allied services at kanpur cantt under ge (i) kanpur

Central Government/Public Sector

CTN :41280510

22 Aug, 2025 NA

Jhansi - Uttar Pradesh

Tender For (a)replacement with supply installation testing commissioning of complete l.t. penal with incomer dr aw out type acb 3200 amp-02 no?s ,bus coupler -01 no in each penal total -02 sets penal 433 v indoor type acb pa nel with all asseseries as per isi specification. with necessary earthing provision. total acb 3200 amp qty.= 06 nos. (b) replacement with supply installation testing commissioning of draw out type acb 800 amp -12 no?s in each-02 no?s penal 433 v indoor type acb panel with interface of all bus-bar complete. with necessary earthing provision. t otal acb 800 amp qty.= 24 nos. at rsk/stli, as per attached technical specification no- rsk/el/m&p/lt penal date- 20.05.2025 make - l&t/havells / schneider /c.g , make of panel: any cpri tested is approved [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41192053

14 Aug, 2025 9.99 Lacs

Ayodhya - Uttar Pradesh

Tender For repair / replacement/maintenance of lt pole,lt pole painting,mcb,mccbs bus bar and certain allied works at ayodhya cantt under age(i) ayodhya

Central Government/Public Sector

CTN :40997941

05 Aug, 2025 50.00 Lacs

Mathura - Uttar Pradesh

Tender For repair maint to electric distribution system including feeder pillar boxes, bus bar, lt panels and connected work under ge (east) mathura

Central Government/Public Sector

CTN :41220160

16 Aug, 2025 43.67 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For special repair / replacement of lt panel, lt cable, tpn / spn dbs, voltage stabilizer, bus bar chamber, earthing and connected accessories installed at transit camp under ge 865 ews

CTN :41228018

04 Aug, 2025 11.68 Lacs

Chandigarh - Chandigarh

Tender For providing electrical supply to newly installed acs in various class of govt. model senior secondary school, school-16-d,chandigarh. - dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, triple pole, dsr item no.2.5 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer) as required (note: vertical type mcb tpdb is normally used where 3 phase outlets are required)., 4 way (4 + 12) double door, dsr item no.14.16 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., 160 mm dia (od-160 mm & id-135 mm nominal), providing and fixing following rating mccb 4 pole 415 volt (thermal magnetic / microprocessor release) without ms enclosure for over load and short circuit protection, 36-55 ka breaking capacity (ics=100% icu) with positive isolation. (as per complete item no. 4 of the dnit)., 100 amp 4 pole 36 ka mccb (thermal magnetic release)., 250 amp 4 pole 36 ka mccb (thermal magnetic release)., 400 amp 4 pole 50/ 55 ka mccb (microprocessor release) with lsig protection., supply and laying of xlpe insulated pvc sheathed aluminium conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of m.s. clamp of suitable thickness. (as per complete item no. 5 of the dnit)., size 35 sq.mm 3.5 core xlpe al. arm. cond. cable, size 25 sq.mm 3.5 core xlpe al. arm. cond. cable, supply and laying of xlpe insulated pvc sheathed aluminum conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid in existing rcc/hume/dwc/ metal pipe. (as per complete item no. 6 of the dnit)., size 300 sq.mm 3.5 core xlpe al. arm. cond. cable, supply, erection testing and commissioning of l.t. cubical panel indoor type with degree of protection ip 54 fabricated from 14 gms (2mm) thick crca sheet and ms flat, (as per complete item no. 7 of the dnit)., 01 no. lt panel approx. size 1150 mm x 2400 mm

Bus Trunking Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors