Latest bushes Tenders | Government bushes Tenders

CTN :39958770

21 Apr, 2025 2.87 Lacs

Ranaghat - West Bengal

Tender For corrigendum : supply of flood fighting materials with utilisation as an when required basis during the monsoon period 2025 for the jurisdiction of ranaghat irrigation section i under ranaghat irrigation sub-division ranaghat nadia. - supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same onembankments, clannels, filling depressions in requisite profile, levelling as per direction of the engineer-in-charge within a lead of (d) beyond 3.00 km and upto 4.00 km (this rate inclussive royalty @ rs.29.00 per m3, compensation @ rs.25.00 per m3 & cess @ rs.5.30 per m3 with the basic rate). assembled=rs. (229.00+29.00+25.00+5.30)=rs. 288.30, labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per irection of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., extra rate for item no above for each additional lead of 60 metre or partthereof beyond the initial lead of 30 metre., dumping in position earth / sand filled gunny / poly bags (capacity 50kg) within a lead of 30 metre inclusive of all lifts, cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by engineer-in-charge

CTN :39958778

21 Apr, 2025 2.91 Lacs

Ranaghat - West Bengal

Tender For corrigendum : supply of flood fighting materials with utilisation as an when required basis for coming monsoon 2025 under the jurisdiction of ranaghat irrigation section ii under ranaghat irrigation sub division. - supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same onembankments, clannels, filling depressions in requisite profile, levelling as per direction of the engineer-in-charge within a lead of (d) beyond 3.00 km and upto 4.00 km (this rate inclussive royalty @ rs.29.00 per m3, compensation @ rs.25.00 per m3 & cess @ rs.5.30 per m3 with the basic rate). assembled=rs. (229.00+29.00+25.00+5.30)=rs. 288.30, labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per irection of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., extra rate for item no above for each additional lead of 60 metre or partthereof beyond the initial lead of 30 metre., dumping in position earth / sand filled gunny / poly bags (capacity 50kg) within a lead of 30 metre inclusive of all lifts, cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by engineer-in-charge

CTN :39958827

21 Apr, 2025 3.84 Lacs

Nadia - West Bengal

Tender For corrigendum : procurement of flood fighting materials along with cutting cleaningofjungles along withclosesurveillance of the banks of river bhagirathi attarapur embankment durinng the monsoonperiod of theyear2025under thejurisdictionofranaghat irrigation sub div. - supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same onembankments, clannels, filling depressions in requisite profile, levelling as per direction of the engineer-in-charge within a lead of (d) beyond 3.00 km and upto 4.00 km (this rate inclussive royalty @ rs.29.00 per m3, compensation @ rs.25.00 per m3 & cess @ rs.5.30 per m3 with the basic rate). assembled=rs. (229.00+29.00+25.00+5.30)=rs. 288.30, labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per irection of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., extra rate for item no above for each additional lead of 60 metre or partthereof beyond the initial lead of 30 metre., dumping in position earth / sand filled gunny / poly bags (capacity 50kg) within a lead of 30 metre inclusive of all lifts, cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by engineer-in-charge

State Government

CTN :39995786

21 Apr, 2025 8.00 Lacs

Kolkata - West Bengal

Tender For wbnkda/01/ ee-p and gv /nkda of 2025-26 cleaning of bushes jungle and parthenium and removal of rubbish grom green verge (phase-1) at action area - i , ii and iii new town kolkata under nkda

CTN :39999913

21 Apr, 2025 NA

Ramgarh - Jharkhand

Tender For trimming of tree branches within 1 mtr span in either side of 11kv, 3.3kv and 440v o/h line of karma project and cleaning of bushes in 2 meter span of o/h line poles of karma project under kuju area.

CTN :40000284

05 May, 2025 50.00 Lacs

Handwara - Jammu And Kashmir

Tender For annual rate contract for supply of line materials and material for repairs of distribution transformers at electric division handwara for the year 2025-26 - supply of dpc aluminium wire (round) in sizes 12 to 20 swg conforming to ie 7404, supply of dpc aluminium strip of sizes for lv winding of distribution transformers 25 kva to 400 kva, supply of se aluminium winding wire ( round) in sizes 12 to 20 swg, supply of dpc aluminium wire (round) in sizes 12 to 20 swg (in exchange of one kg of srap of salvaged conductor), supply of dpc aluminium strip of sizes for lv winding of distribution transformers 25 kva to 400 kva (in exchange of one kg of srap of salvaged conductor), supply of se aluminium winding wire ( round) in sizes 12 to 20 swg (in exchange of one kg of srap of salvaged conductor), supply of lv brass bush rods 12 mm2 complete with bush collars, bush washers,nuts and bolts of identical matter, rubber oil seals and ring washers., supply of lv brass bush rods 19 mm2 complete with bush collars, bush washers,nuts and bolts of identical matter, rubber oil seals and ring washers., supply of ht brass bush rods 12 mm2 complete with bush collars, bush washers,nuts and bolts of identical matter, rubber oil seals and ring washers., supply of press card board sheet (4x4) soft calendared solid 1mm/2mm/3mm (raman make), supply of ht insulating gum, supply of glass sleeves of size 1m long,4 to 14 mm, supply of lethoride paper 8 to 12 mil, supply of ht paper 1.5/2/2.5 mil, supply of lv bushes 250 amp, supply of lv bushes 650 amp, supply of cotton tape 1 wide vector brand, supply of rubberized cork sheet oil resistant of size 4mm thick, 2ft x 3ft long (nucork/televrass make), supply of lv cork washers of size 12 mm dia, supply of lv cork washers of size 20/25/30/40 mm dia, supply of hv cork washers 110mm od, supply of oil seal ring (o-ring) for lv/hv bush rods 12 mm dia, supply of oil seal ring (o-ring) for lv/hv bush rods 20 mm dia, supply of transformer oil as per is-335 of 1993 with latest ammendents uptodate. (servo/power oil/apara etc), supply of aluminium thimbles of size 185 sqmm as per relevant is, supply of aluminium thimbles of size 300 sqmm as per relevant is, supply of backlite tube 1m long,16/20 mm dia, supply of spanners sets of all sorts and screw drives of all sorts, supply of oven heating rods, supply of old saries /cotton waste/dhoti cloth, supply of fabricated galvanized v-cross arm channel iron (75*40*40*6) mm for 11kv inluding back clamps of flat iron 50*6 mm for fixing of v-cross arm and gi angle iron pole top bracket 50*50*6 mm (400mm long) with galvanized welded plate of flat iron 50*6 mm along with double clamps complete assembly as per rec specification., supply of fabricated galvanized iron channels for sub-stations as per rec specification., supply of 11 kv disc insulators polymer type with fitting 45kn as per rec standard., supply of 11 kv pin insulators polymer type with gi pins 5kn as per rec standard., supply of 11 kv pin insulators porclein type with gi pins 5kn as per rec standard., supply of mukhi clamps as per rec standard., supply of lt shackle insulators 16kn as per rec standard., supply of fabricated galvanized nuts and bolts as per rec standard.

Central Government/Public Sector

CTN :40000948

01 May, 2025 9.89 Lacs

Mormugao - Goa

Tender For annual maintenance contract (amc) for weeding / cutting and cleaning grass and wild bushes outside custom bound areas of mpa at headland for the period of two years - 2025-2026 and 2026-27

corporations/Associations/Others

CTN :40003034

17 Apr, 2025 13.79 Lacs

Multi City - Andhra Pradesh

Tender For supply of gym equipment of chennupati ramakotaiah indoor stadium in 11th division. 1st call general funds - "providing and fixing of gym rubber mat flooring tiles of size of 500 x 500 mm and thickness of 15 mm,interlocking type of vulcanized virgin rubber of design and colour and with excellent impact bearing, tough on falling weights, protection to sub floor, sound absorbing & highly durable complete as per directions of engineer - in -charge. make - ecoflex, bioflex, fitflex or equivalent. including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. ", "providing hack squat machinestructure and frames: structural frames are fabricated from 100 x 50 x 2.5mm thick square steel tubing. heavy metal bending design is used to ensure superior strength and to eliminate joint failure. weight stack: m.s weight stack; having 7.5 kg each plate weight fitted with 2 nylon bushes to avoid noiseless operations. guides: stainless steel guide rods of 25mm thick is used. bearings: lubricated high grade 'zz' steel ball bearing. selector pins: magnetic selector pins; made up of high quality steel 10mm with spring wire mechanism and nylon knob. cables: 6mm nylon air craft cables are used. pulley: pulleys made up of high quality nylon with deep grooved to support cable and double 'zz' bearing with m10 pin ensures superior strength and longevity.cushion / padding: seats cushion and pads are made up of 2"" high density foam and 18mm marine plywood is used for greater life and finally covered with heavy vinyl.hardware: hardware used are button head bolts and made up of high tensile steel.powder coating: all components are chemically treated to seal exterior and interior surfaces against corrosion. the components are electro statically powder coated at minimum 60-70-micron thickness to make it resistant to scratch, corrosion and humidity. closing caps: all open ends are covered with nylon/pp closing caps.handgrips: hand grips is used on handles wherever necessary made up of high quality rubber. foot pad: high quality rubber foot pad. digital repetition counter for each exercise/workout sets. including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. ", providing multi adjustable bench structure and frames: structural frames are fabricated from 100 x 50 x 2.5mm thick square steel tubing. heavy metal bending design is used to ensure superior strength and to eliminate joint failure. selector pins: magnetic selector pins; made up of high quality steel 10mm with spring wire mechanism and nylon knob. cushion/padding:seats cushion and pads are made up of 2" high density foam and 18mm marine plywood is used for greater life and finally covered with heavy vinyl. hardware: hardware used are button head bolts and made up of high tensile steel. powder coating: all components are chemically treated to seal exterior and interior surfaces against corrosion. the components are electro statically powder coated at minimum 60-70-micron thickness to make it resistant to scratch, corrosion and humidity. closing caps: all open ends are covered with nylon/pp closing caps. foot pad: high quality rubber foot pad. including cost and conveyance of all materials and labour charges etc., complete as directed by the departmental authorities. , providing flat bench structure and frames: structural frames are fabricated from 100 x 50 x 2.5mm thick square steel tubing. heavy metal bending design is used to ensure superior strength and to eliminate joint failure cushion / padding: seats cushion and pads are made up of 2" high density foam and 18mm marine plywood is used for greater life and finally covered with heavy vinyl. hardware: hardware used are button head bolts and made up of high tensile steel. powder coating: all components are chemically treated to seal exterior and interior surfaces against corrosion. the components are electro statically

Central Government/Public Sector

CTN :40013259

24 Apr, 2025 1.43 Lacs

Sidhi - Madhya Pradesh

Tender For providing of facility management services - lumpsum based - residential; trimming of tree branches and bushes; consumables to be provided by service provider (inclusive in contract cost)

Central Government And Public Sector

CTN :39922543

22 Apr, 2025 NA

Raipur - Chhattisgarh

Tender For corrigendum : supply of main pull rod assembly (short) with bushes for boxn wagon to irs drawing no. wa/bg- 6354, alt-3. material & specification as per drawing. [ warranty period: 30 months after the date of delivery ]

Bushes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector