Latest bushing rod Tenders | Government bushing rod Tenders

State Government

CTN :39387236

26 Feb, 2025 9.83 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure thrashing floor including pucca storage near pottamuckal vaikal at nedungadu village panchayat in nedungadu commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100mm channel shoulder 2.5m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire charges of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type., supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loader including operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuel including operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm) including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooper including operating staff,diesel & lubricant oil etc,complete., hire charge of hydraulic piling rig with power unit etc.,complete accessories and shifitin including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete-h/c of pump, piping work, & accessories etc including operating staff,diesel& lubricant oil etc,complete., hire charge production cost of concrete by batch mix plant(rolling every layer and top-most layer ) including operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

State Government

CTN :39387237

26 Feb, 2025 11.28 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure thrashing floor including pucca storage at konnakavaly in varichikudy village panchayat at kottucherry commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges wall form panel 1250x500 mm, hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip, hire charges m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire chargesflame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete., hire and running charges for light crane including operating staff,diesel& lubricant oil etc,complete., hire and running charges for ofhydraulic piling rig with power unit etc.,complete accessories and shifitin at site including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete including-h/c of pump, piping work, & accessories et, production cost of concrete by batch mix plant ncluding operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

corporations/Associations/Others

CTN :39409004

25 Feb, 2025 4.20 Lacs

Tiruvannamalai - Tamil Nadu

Tender For supply of lv brass bushing rod 12mm

corporations/Associations/Others

CTN :39409007

25 Feb, 2025 3.00 Lacs

Tiruvannamalai - Tamil Nadu

Tender For supply of hv brass bushing rod 12mm

Central Government/Public Sector

CTN :39171274

26 Feb, 2025 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : provision of pillar upto 1.5 height for demarcation of defence land at hirakund - excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed, m & l for providing precast cement concrete, type b-1 1:2:4 (using 20 mm graded mechanically graded stone aggregates) in win- dow or door cills, lintels, bressumers, steps,quoin blocks (foruse with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings,throat- ing etc. and setting in mortar(1:4)complete with joints to match all as specified and directed., m&l for pcc 1:3:6 type d2 using 40 mm graded stone aggregate as in foundation filing and mass concrete., m&l for mild deformed tmt steel bars 10mm dia and over, cut to lenght, bent to shape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed, ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders, removing excavated material(soils) n exc 50 and desposting where directed at a level n exc 1.5 at a level n exc 1.5m above starting point complete all as specified and directed by eng in charge., s&f for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe-290 gde e-165 complete all as specified, m & l for writing letter or figured (block, roman, italic or indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed., m&l for preparation of newly untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth, not otherwise described complete all as specified and directed., mild steel of thickness 0.63mm , plain, blacksheet in wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

State Government

CTN :39268893

24 Feb, 2025 16.48 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of post harvest structure including pucca storage at erukady aalamaram at t.r.pattinam (central) vp in t.r.pattinam commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges wall form panel 1250x500 mm, hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip, hire charges m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, supply of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, charges of welding by electric plant, supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete., hire and running charges for light crane including operating staff,diesel& lubricant oil etc,complete., hire and running charges for ofhydraulic piling rig with power unit etc.,complete accessories and shifitin at site including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete including-h/c of pump, piping work, & accessories et, production cost of concrete by batch mix plant ncluding operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

CTN :38076926

07 Mar, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supply of vehs spares - lv1 r90 4010720516468 rope drg no 172-91-387sb , lv1 r90 6230720046415 portable light nst39-21-001- u2 6m , lv1 r90 4820057897 valve drg no 188-60-029sb , lv1 r90 3020720354216 rotory coveyor guard 188- 91-021sb , lv1 r90 5310720067683 nut m12- 6h.32.l63.136 gost 5916-70 , lv1 r90 5340720328871 support drg no 188-30-005-1 , lv1 r90 5340720241468 block , lv1 r90 5365182734 hose drg no 188-66-009 , lv1 r90 7330720443250 snorkel , lv1 r90 5315720112863 lock drg no 188-31-233 , lv1 r90 6680375183020 fuel guage it3-1s , lv1 r90 5365720175653 bushing rod drg no 188-63-010 , lv1 r90 5340720270502 lever drg no 219-93-sb189 , lv1 r90 3020720310391 gear cluster drg no 188-94-033-1 , lv1 r90 3010720310282 gear drg no 188-94-041sb

Central Government/Public Sector

CTN :39224791

25 Feb, 2025 11.55 Lacs

Kannur - Kerala

Tender For supply of title1 bid - floor tiles , water storage tank 1000 ltr , cpvc pipe 2 inch , cpvc fta 2 inch , cpvc 2 inch socket , cpvc gate valve 2 inch , cpvc 45 degree elbow 2 inch , cpvc tee 2 inch , cpvc elbow 2 inch , cpvc tank connector 1.5 inch , cpvc fta 1.5 inch , cpvc pipe 1.5 icnh , cpvc valve 1.5 inch , cpvc tee 1.5 inch , cpvc elbow 1.5 inch , cpvc socket 1.5 inch , cpvc reducer 1.5 inch x 1 inch , cpvc pipe 1 inch , cpvc tee 1 inch , cpvc elbow 1 inch , cpvc socket 1 inch , cpvc 45 degree elbow 1 inch , cpvc reducer one inch x three quarters inch , cpvc pipe three quarters inch , cpvc elbow three quarters inch , cpvc tee three quarters inch , cpvc brass elbow three quarter inchx half inch , cpvc brass tee cpvc brass elbow three quarter inchx half inch , cpvc brass fta cpvc brass elbow three quarter inchx half inch , cpvc brass mta cpvc brass elbow three quarter inchx half inch , cpvc solvent 100 ml , european water closet s- trap , mirror 5ft x 2ft , towel rod 2 ft length , indian water closet , low level flushing cistern , pvc slovent 100ml , ewc seat cover , health faucet , cp brass long body bib cock , cp brass short body bib cock , 4 inch pvc end cap , cp brass 2 in 1 tap , thread seal tape , cp brass angle cock , 4 inch cutting wheel , welding rod , cp brass concealed stop cock , pvc shower rose with arm , brick , cement , pvc connection , wash basin , 4 inch pvc elbow , wash basin waste coupling cp , cp brass pillar cock , one and quarters inch waste pipe , 10 mmx 6 inch bolt with nut , 4 inch floor trap pvc , one and quarters inch pvc pipe , 1.5 inch ss screw , one and quarters inch pvc elbow , indian water closet trap , pvc float valve 2 inch , 1 inch cpvc clamp , three quarters inch cpvc clamp , 2.5 inch pvc pipe , 2.5 inch pvc door elbow , 2.5 inch pvc tee , 2.5 inch pvc elbow , 2.5 inch pvc 45 degree elbow , 4 inch pvc pipe , 4 inch pvc tee , 4 inch pvc 45 degree elbow , 4 inch pvc door elbow , 4 inch pvc air cap , frp man hole cover 12 inch x12 inch , pvc mta 2 inch , pvc reducer 2 inch x 1.5 inch , 8 nos x 3 inch brass crew , ms iron angle 50mm x50mmx 5mm , ms iron angle 40mm x40mmx 5mm , ms iron angle 25mm x25mmx 5mm , ms plate 5mm , epoxy paint , m sand , 20 mm stone aggregate , tmt bar 8mm dia , binding wire 1.22mm

Bushing Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector