Latest cab window Tenders | Government cab window Tenders

Central Government/Public Sector

CTN :40485108

10 Jun, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of set of cab window assembly lh & rh (02 nos. each) (consists 02 items 04 nos.) to clw spe c. no.clw/ms/3/014, alt-5 or latest except frame ref.-8 or drg. no. 1209.09.133.005 alt-5 or latest & fram e ref-7 of drg. no.1209.09.133.006 alt-5 or latest. [ warranty period: 30 months after the date of deliver y ]

CTN :40492267

31 May, 2025 9.37 Lacs

Kolkata - West Bengal

Tender For conversion of existing hall into x-ray room with attached toilet with required chambers, stores etc. of aluminum partitions, wood works in frame and required flush doors and fixing the lead sheet in doors and windows to protect the side effects of radiation lights inside x ray room, to operate the x ray room at earliest at ground floor of hospital building at national institute of homeopathy campus at salt lake kolkata during year 2025-26. sh: balance miscellaneous civil work.

CTN :40470625

30 May, 2025 25.67 Lacs

Mumbai - Maharashtra

Tender For replacement of damaged wire gauge in sliding windows and kitchen cabinet shutters with frame, cupboard shutters and miscellaneous works in nav chetna building no.1 & 2 in sector-iii to cgh at sector-i to iv, antop hill, mumbai-37, during 2025-26.subwork/packages:replacement of damaged wire gauge in sliding windows and kitchen cabinet shutters with frame, cupboard shutters and miscellaneous works in nav chetna building no.1 & 2 in sector-iii to cgh at sector-i to iv, antop hill, mumbai-37, during 2025-26

CTN :40466894

24 Jun, 2025 20.00 Lacs

Sagar - Madhya Pradesh

Tender For invited rate for cilvil material supply work at financial year 2025-2026 - flag stone (3 inch thickness), flag stone (4 inch thickness), metal red 40 mm, metal crushed 40 mm, metal crushed 20 mm, metal crushed 10 to 12 mm (including cost of spreading), granular sub-base material (including cost of spreading), metal crushed 6 mm (including cost of spreading), brick (open bhatta), brick (fly ash), over size metal (75-100 mm) including cost of spreading, boulder (including cost of spreading), moorum (including cost of spreading), hard copra (including cost of spreading), black cottan soil for plantation (including cost of spreading), stone dust (including cost of spreading), fine sand (narvda), sand (local), masonary stone( 8x8, 6x6 inch), mild steel / tar rod (6,8,10,12,16 mm), cement (isi mark), steel cross chanel frame work, w.c. sheet western (isi mark), w.c. sheet indian(isi mark), washbasin size 630x450 mm with apair of 15mm c.p brass pillar taps (isi mark), urinal 10 litr wit automatic flushing cistern (isi mark), pvc pipe 2 inch (isi mark), pvc pipe 3 inch (isi mark), pvc pipe 4 inch (isi mark), pvc pipe 6 inch (isi mark), gi pipe 2 inch, gi pipe 3 inch, gi pipe 4 inch, lime, distemper (with brand), paints (with brand), emulsion (with brand), paint for metallic item (with brand), paint for wooden item (with brand), primer (with brand), varnish (with brand), turpentine oil (with brand), melamine polish (with brand), granite different thickness, kota stone different thickness, ceramic tiles different thickness, white marble different thickness, glazed tiles different thickness, centering / shuttering, fancing barbed wire, gi chain line febric fencing with size 50x50 mm and 4mm dia wire, fancing pole (ht.-2.5m.), corrugated galvanised sheet with polymer coated, glass panes different thickness, anodied aluminium according to is:1868, powder coated aluminium, polyster powder coated aluminium, laminated particle board, ply board 8mm (waterproof standard brand ), ply board 10mm (waterproof standard brand ), ply board 12mm (waterproof standard brand ), ply board 16 mm (waterproof standard brand ), ply board 20 mm (waterproof standard brand ), mica sheet different thickness, m-30 grade 60mm paver block, stainless steel railing, galvanised fly proof wire gauze to windows with m.s flat, galvanised fly proof wire gauze to windows with m.s flat, angle iron post and strut, structural steel work including cutting ,hoisting ,fixing in diff. position, p.v.c sheet, labour rate (skilled), labour rate (unskilled)

Central Government / Public Sector

CTN :40485790

16 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply of set of cab windows for wag-9 loco lh as per clw drg no.1209.09.133.005 alt-1 qty. 2 nos. and rh as per clw drg no.1209.09.133.006 alt-1 qty. 2 nos. [ warranty period: 30 months aft er the date of delivery ]

State Government

CTN :40425506

28 May, 2025 NA

Gondia - Maharashtra

Tender For supply of materials for gp duggipar nainpur - list of material, metal 80 mm with royalti, metal 40 mm with royalti, metal 20 mm with royalti, churi 10 mm with royalti, sand with royalti, cement 53 grade isi mark ultratech, steel isi mark 6 mm, steel isi mark 8 mm, steel isi mark 10 mm, steel isi mark 12 mm, steel isi mark 16 mm, soil bricks std size, fly ash/cement bricks, supply of soft murum with royalti, supply of soil, tractor carting rent, carting of waste material, concrete mixture, excavator bakhoe loader, static roller, water tanker, centering, ventilator, grill works, vetrified tiles, oil paint, birla white, distemper, paving block 60 mm, paving block 80 mm, steel door, steel windows, water pump, rcc pipe 1000 mm with collars, rcc pipe 800 mm with collars, rcc pipe 600 mm with collars, rcc pipe 450 mm with collars, rcc pipe 300 mm with collars, paving block 60 mm rubber molded, paving block 80 mm rubber molded, information board, steel sheet 12*4, cement sheet 12*4, fiber door, cement sitting chair, toilet sheet kamod type, primer, steel angle, wooden door frame 3.5x7 ft, basin

Central Government/Public Sector

CTN :40426937

11 Jun, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of title - supply and installation of superior quality eyelet curtain "with ss rod and bracket set and all fitting arrangement for doors and windows. curtains panna 48 inch quality, design and brand to be approved by ca before , frosty stainless steel dust bin 1 bin mounted with 1 pole capacity 10 ltr with inner plastic lining a sample to be approved , bathroom sets (1) pvc bucket 20 ltr. 01 no. (2) pvc mug 1 tr. 01 no. (3) pvc stool (patla) =01 no. (4) pvc soap case 01 no. (5) cioth hanger =01 no. (6) bath mirror pvc frame 01 no. (7) pvc dust bin 9 ltr. +01 no. one set of sample to be approved by ca , bed sheet single bed printed colour with pillow cover make/brand-bombay dyeing/ramond/d.decore , superior quality blanket single bed (coloured) of size - 220 150 cm. make - raymonds, bombay dyeing, monte carlo, springfit or better , supply and installation of 304 grade stainless steel 4 seater bench, design and specification as per rdsos specification wenclosed herewith( back rest with seat partition) drg rdso/wks/2018/2 dt 05.06.2018). bench should be installed at station, station and qty, at each station will be advised by this office , single bed 5.5 cot size 2060mm*920mm*450mm 55 204 grade as per annexure a attached a sample to approved. "with plywood top 10 mm ,single bed mattress? of printed fabric double side quilted with full bonded size 6.6 feet x 3 feet x 150 mm, density of complete bonded mattresses with 85 d bonded foam, bonded thickness-75 mm, quilted with pu foam thickness 25 mm on both side, total thickness-150mm i.e.(100 mm+25 mm+25 mm), nature of tapestry- polly viscose with 05 year full replacement guarantee for bonded foam brand godrej, sleep well, springwell wakefit

Central Government/Public Sector

CTN :40461811

30 May, 2025 NA

Valsad - Gujarat

Tender For supply of cab window glass

CTN :39038232

06 Jun, 2025 13.18 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 25) , outside micrometer (25 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling a

CTN :40363116

06 Jun, 2025 1.00 Lacs

Hyderabad-T - Telangana

Tender For supply of hand pump cr 1a 2266 , pneumatic valve , bowden cable , window dropper , cab lifting electric control , master cylinder bi , hose tu40

Cab Window Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector