Latest cane carrier slat Tenders | Government cane carrier slat Tenders

Central Government / Public Sector

CTN :40685457

26 Jun, 2025 24.49 Lacs

Panipat - Haryana

Tender For custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

Central Government/Public Sector

CTN :40694084

17 Jun, 2025 1.98 Lacs

Singrauli - Madhya Pradesh

Tender For day to day shifting , diversion , erection ,dismantling of ht ohl related work for providing space to hoe and departmental hemms for working and power supply to equipment in amlohri mine.

State Government

CTN :40704238

23 Jun, 2025 NA

Anantnag - Jammu And Kashmir

Tender For providing of tentage service lumpsum based - freshers cum farewell event; lighting, theme based installation, decoration, furniture & equipment rentals, maintenance & support, dismantling and removal, also audio visual system and other items mentioned in the scop..

CTN :40703299

23 Jun, 2025 35.00 Lacs

Ghazipur - Uttar Pradesh

Tender For providing of tentage service lumpsum based - agricultural training; floorings, lighting, tent rentals, theme based installation, decoration, furniture & equipment rentals, power supply, maintenance & support, dismantling and removal

State Government

CTN :40686572

21 Jun, 2025 20.00 Lacs

Bahraich - Uttar Pradesh

Tender For providing of tentage service lumpsum based - disaster relief camp (waterproof) and rehabilitation; floorings, lighting, tent rentals, furniture & equipment rentals, power supply, dismantling and removal

State Government

CTN :40662420

25 Jun, 2025 3.15 Lacs

Bellary - Karnataka

Tender For dismantling, lowering loading unloading raising and erecting works of heavy equipment like ht motors ilms, lt motors (37kw and above), afd dc motors and such heavy equipment

Corporations And Associations And Others

CTN :40669839

26 Jun, 2025 NA

Nawanshahr - Punjab

Tender For chain and chain spares - chain and chain spares (csm nawanshahr), supply of secondary carrier chain spares as per drg. no. 183 r3 (qty in mtr)material of side link en 45pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5 hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 60 ton, supply of cane carrier chain and spares as per drg. no. 216 r3 (qty in mtr)material of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 40 ton, side link (fig no. 1) (qty. in nos.), side link (fig no. 2) (qty. in nos.), side link (fig. no. 3) (qty. in nos.), roller (fig no. 4) (qty. in nos.), pin (fig no. 5) (qty. in nos.), bush (fig no. 6) (qty. in nos.), slats (fig no. m- 316r) (qty. in nos.), supply of rbc chains as per drg. no. m- 263r (qty. in mtr.)material of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller - is 226-1975hardness = pin 50 + 5 hrc bush 40 + 5 hrc roller 30 + 5 hrcbreaking load = 60 ton, side link for bush (fig no. 1) (qty. in nos.), side link (round hole) (fig no. 2) (qty. in nos.), side link (one side cut hole) (fig no. 3) (qty. in nos.), side link for attachment (fig no. 3 a) (qty. in nos.), attachment no. m 111r2 (qty. in nos.), roller (fig no. 4) (qty. in nos.), bush (fig no. 5) (qty. in nos.), pin (fig no. 6) (qty. in nos.), rake (grill type) as per drg. no. m 111r3 (qty. in nos.), pin for rake as per drg. no. m 111r4 (qty. in nos.), supply of forged link chain 229 mm , pitch as per drg. no. m-305 (qty in mtr) specification: material of forged block - en 30 b material of pin & bush - 16n13cr2 pin hardness - 50 5hrc hardness - 40 5hrc breaking load - 70 ton, csm bhogpur bagasse elevator and its spares, chain with case hardened, m.s roller, bush and pins for baggase elevator chain having attachment link at every 4th link., pitch 150 mm, side link as per drg. no.ce/mh/504 with test certificate from approved lab (qty. in mtr), bush as per drg no. ce/mh/504 (qty. in nos.), roller as per drg no. ce/mh/504 (qty. in nos.), pin as per drg.no ce/mh/504 (qty. in nos.), outer link pin cut type as per drg.no. ce/mh/504 (qty. in nos.), outer link pin size hole as per drg.no. ce/mh/504 (qty. in nos.), inner link bush type (both sides) as per drg.no. ce/mh/504 (qty. in nos.), side attachment link as per drg.no. ce/mh/504 (qty. in nos.), cane carrier chain and its spares:cane carrier chain pitch -150mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no.mh pcc r1 (qty in mtr.), pin as per drawing no. . mh pcc r1 (qty. in nos.), bush as per drawing no. . mh pcc r1 (qty. in nos.), roller as per drawing no. . mh pcc r1 (qty. in nos.), outer link r.h as per drawing no. . mh pcc r1 (qty. in nos.), outer link l.h as per drawing no. . mh pcc r1 (qty. in nos.), inner link r.h & l.h as per drawing no. . mh pcc r1 (qty. in nos.), cane carrier slates as per drg no. . mh pcc r1 (qty. in nos.), inter rack carrier chain & its sparesinter rack carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503 (qty. in mtr.), bush as per drg.no. ce/mh/503 (qty. in nos.), roller as per drg no. ce/mh/503 (qty. in nos.), pin as per drg no. ce/mh/503 (qty. in nos.), outer link as per drg.no. ce/mh/503 (qty. in nos.), inner link as per drg.no. ce/mh/503 (qty. in nos.), side attachment link as per drg.no. ce/mh/503 (qty. in nos.), secondary carrier chain & its sparessecondary carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503 (qty. in mtr.), bush as per drg. no. ce/mh/503, (qty. in nos.), roller as per drg no. ce/mh/503 (qty. in nos.), pin as per drg no. ce/mh/503 (qty. in nos.), outer link as per drg.no. ce/mh/503 (qty. in nos.), inn

Central Government/Public Sector

CTN :40657662

23 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply, erection, testing and commissioning of vvvfd control panel suitable for 5 ton ac eot crane, capacity 1) main hoist: 1 x 12 hp, 2) long travel: 2 x 9 hp, 3) cross travel : 1 x 3.5 hp, with dual spee d pendent station and associated equipment as per annexure attached. makes: schneider, fuji, siemens, a bb & yaskawa only acceptable, warranty: 1 year. note: the firm has to carry out dismantling of existing pan els and commissioning of above vvvf drives duly erected and tested as per annexure attached. [ warranty period: 12 months after the date of delivery ]

CTN :40638099

13 Jun, 2025 2.18 Lacs

Jodhpur - Rajasthan

Tender For augmentation work of 132/33kv (1x40/50mva-1x20/25mva) transformer for erection & dismantling work of 132/33kv transformer, bus-bar, equipment and earthing work for augmentation work of 132/33kv, 40/50mva transformer at 132kv gss rvpnl, khetusar

CTN :40638100

13 Jun, 2025 2.57 Lacs

Jodhpur - Rajasthan

Tender For augmentation work of 132/33kv (1x40/50mva-1x20/25mva) transformer for erection & dismantling work of 132/33kv transformer, bus-bar, equipment and earthing work for augmentation work of 132/33kv, 40/50mva transformer at 132kv gss rvpnl, ps-v

Cane Carrier Slat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

State Government

State Government

State Government

Corporations And Associations And Others

Central Government/Public Sector