Latest car spray Tenders | Government car spray Tenders

Central Government / Public Sector

CTN :40685457

26 Jun, 2025 24.49 Lacs

Panipat - Haryana

Tender For custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

corporations/Associations/Others

CTN :40696272

21 Jun, 2025 NA

Pune - Maharashtra

Tender For purchase of miscellaneous items for pmc vehicle - fevi kwik ( 1 gm pack), anabond tube white color (25 gm pack), anabond tube white color ( 100 gm pack), anabond tube red color (85 gm pack), araldite ( 9 gm pack), m-seal (100gm pack), loctite 50ml, shellack bottle (30ml), rust lick spray (370 ml pack), rust lick spray (133 ml pack), carbueretter spray (500 ml), 3m high power brake cleaner spray (397 ml pack), teflon tape (roll of 5 mtr.), cable tie (10" packet of 100 pieces), cable tie (12" packet of 100 pieces), sulfuric acid diluted (for battery), blow heater brass 1 litre, nitric acid concentrated (for solder), distilled water, oxygen acetylene regulator repair, major repair, minor repair, oxygen / acetylene pressure meter, gas cutter repair, major repair, minor repair, oxygen / pressure guage knob, solder gun (small), solder gun (big), hydrometer, kalai ( tinning material), solder rod, solder khadya, zn sheet size (), mounting rubber with ms washer and castle nut bolt (cabin foundation) square / round, radiator mounting rubber with bolt and washer, water tanker foundation rubber (size 6"x10"x1" thick), hose clips, hose clip m00, hose clip 000, hose clip 1, hose clip 1a, hose clip 2, hose clip 2a, hose clip 3, hose clip 4, clip bolt with nut, 5/16" x 4", 3/8 x 4", 1/2" x 4", u clamp washer, u clamp washer 5/8", u clamp washer 6/8", u clamp washer 7/8", shims washer, 4mm for tata 709, 4mm for tata 1612, 4mm for tata 2518, grease nipple, grease nipple tata 709, grease nipple tata 2516, grease nipple with adapter leyland, plain washer, m6, m8, m10, m12, m14, spring washer, m6, m8, m10, m12, m14, m16, dowty washer, dowty washer 1/8", dowty washer 1/4", dowty washer 3/8", dowty washer 1/2", dowty washer 3/4", cotter pin, 1/8"x1", 1/8"x11/2", 1/8"x2", 1/8"x3", 1/4"x3", coil, m6, m8, m10, m12, m14, m16, pop rivets packet of 1000 nos, pop rivets 3/16 x 1", pop rivets 3/16 x 3/4", polyurethane pipe, polyurethane pipe 6x4mm, polyurethane pipe 8x4mm, joint pipe, joint pipe seam less ms tata 709, joint pipe seam less ms tata 1612 / 2516, joint pipe seam less ms tata 2518 / leyland 2516, ms joint pipe tata ace, gi pipe 3" od, axle packing, axle packing tata 709, axle packing tata 1210 / 1612, axle packing leyland, differential packing, differential packing tata 709, differential packing tata 1210 / 1612, differential packing tata leyland, pto packing, pto packing tata 709, pto packing tata 1210 / 1612 /2518, pto packing leyland, bosch pump packing, bosch pump packing tata 709, bosch pump packing tata 712 / 1612 / 2518, bosch pump packing tata 2516, side cooler plate pkg, side cooler plate pkg tata 709, side cooler plate pkg tata 1612, chamber packing, chamber packing 709, chamber packing 1612, bell crank washer 4 mm thick tata 2516 / leyland 2516, square tipper pad set ( nut bolt and washer) - leyland, square tipper pad set ( nut bolt and washer) - tata, number plate, acrylic 4 mm front side for cars, acrylic 4 mm rear side for cars, acrylic 4 mm with rto number plate for prabhag samiti, acrylic 4 mm with high security number plate pasting for prabhag samiti, brass word name plate with pmc logo with number plate, acrylic 4 mm block number plate, acrylic 4 mm block name and number plate with pmc logo, radium lettering " ", size 12" x 2", size 18" x 5", size 23" x 5", radium lettering " ", size 12" x 2", size 18" x 5", size 23" x 5", number plate guard (set of 2 pieces), air pipe samsun make, 8mm, 19mm, 24mm, flexible pipe (for wire cover), flexible pipe 8 no. (for wire cover), flexible pipe 10 no.(for wire cover), flexible pipe 12 no. (for wire cover), flexible pipe 15 no. (for wire cover), transparent pipe spring type, dia 1", dia 11/2", hydraulic suction hose id 2" length 45", air cleaner rubber hose tata 709 sfc, oil paper, size - 2x2 thin, size - 2x2 medium, size - 2x2 thick, helite paper, size - 2x2 medium, size - 2x2 thick, cutting oil, ball valve cock, 2 ball valve (for water tanker), ball valve cock 2 1/2" for water tanker, ball

State Government

CTN :40708231

18 Jun, 2025 80.6 Thousand

Hyderabad - Telangana

Tender For engaging the labour for cleaning of vacant quarter no 24 , un- loading old materials , at quarter no. 23 at road no. 12, banjara hills, hyderabad.

Central Government/Public Sector

CTN :40692105

23 Jun, 2025 2.22 Lacs

Jharsuguda - Odisha

Tender For one time cleaning and removal of wastage, unwanted materials, and earthing heap etc. with minor miscellaneous work for gm office building outside premises area under lakhanpur area

CTN :40695944

27 Jun, 2025 40

Anekal - Karnataka

Tender For procurement of cleaning materials for suragajakkanahalli gp for the year 2025-26 - coco broom with 5 feet length only natural product to sweep the outdoor only, garbage cover small size, metal type big web stick16 to 24 feet length, small web stick 8 feet, metal dust pan, plastic dust pan, water jug normal size, plastic bucket, system herbicide glyphosate 41% sl, ammonium salt of glyphosate 71 % sg powder, grass cutter or weed cutter 4 stroke engine honda or other brand made company only 1 year motor warranty only without spares running petrol only, grass cutter or weed cutter 2 stroke engine with weed cutter 250meter wire 2sets of blades 1 year service warranty period without spares only china make only no brand petrol and oil running, with push cart set and 3phase honda motor and pump 100 meter flexible hose cable 2no spray guns 250 ltr capacity tank 1 year warranty for motor out of service is free up to 1year spare are chargeable, battery & manual sprayer to wear the back side 16ltr capacity tank no warrant for battery only service warranty 6months without spares only , giantbigfogging machine 1.9 ltr consumption ltr per hr chemical tank 5ltr capacity hand pump 3 to 4 time then cahrgeble battery running 1 year service warranty only with spares and labour charge are extra. to diesel and petrol running only, mini small fogging machine to spray for mesquites no warranty product to use diesel and mini gas can, the composition of malathion tech 5.0% based on 95% chain clay 10% soapstone, toilet cake or odonil fragrance of wash room purpose only, bamboo ladder, mop small cloth to use office table and chairs cleaning purpose only, clip mop set it use moping purpose to office only, apron, sodium hypo chloride, weed control chemical, mask branded, gum boots branded, pvc hand gloves 16 inches, coco broom, soft broom, toilet cleaning acid, malathion oil 5.0% e.c, pesticide (fogging chemical with water mix), fogging chemical (with fuel mix), black phenyl, white scented phenyl, alum crystal, malathion dust 5.0%e.c, bleaching powder 33% chlorine, safety helmets, sanitizer

CTN :40692071

23 Jun, 2025 10.48 Lacs

Bardhaman - West Bengal

Tender For debris cleaning carbonaous materials cleaning in rvii seam at 3 and 4 pit unit of shankarpur colliery.

CTN :40627871

18 Jun, 2025 37.84 Lacs

Jhajha - Bihar

Tender For mr-n-24-25- jhajha-01 (kiyajori to jogiyatilha) - kiyajori to jogiyatilha clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification clause 303.1., for 100 m lead @ 80 %, for 100 m lead @ 20 %, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less than 150kg/cm, opc to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant , trasported to site, laid with a paver with electronic sensor , compacting with 8-10 tonnes vibrartory roller, finishing and curing., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum s

CTN :40691865

18 Jun, 2025 9.63 Crore

Sasaram - Bihar

Tender For mr-n/24-25 sasaram-02/01 - l068-t05 to panrwa (vr37), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade 2) : construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam with stone screening gr-ii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., water bound macadam gr iii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.2 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capasity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion ,construction joints, ap

CTN :40646746

23 Jun, 2025 40

Multi City - Karnataka

Tender For procurement of cleaning materials for doddagubbi gp for the year 2025-26 - coco broom with 5 feet length only natural product to sweep the outdoor only, garbage cover small size, metal type big web stick16 to 24 feet length, small web stick 8 feet, metal dust pan, plastic dust pan, water jug normal size, plastic bucket, system herbicide glyphosate 41% sl, ammonium salt of glyphosate 71 % sg powder, grass cutter or weed cutter 4 stroke engine honda or other brand made company only 1 year motor warranty only without spares running petrol only, grass cutter or weed cutter 2 stroke engine with weed cutter 250meter wire 2sets of blades 1 year service warranty period without spares only china make only no brand petrol and oil running, with push cart set and 3phase honda motor and pump 100 meter flexible hose cable 2no spray guns 250 ltr capacity tank 1 year warranty for motor out of service is free up to 1year spare are chargeable, battery & manual sprayer to wear the back side 16ltr capacity tank no warrant for battery only service warranty 6months without spares only , giantbigfogging machine 1.9 ltr consumption ltr per hr chemical tank 5ltr capacity hand pump 3 to 4 time then cahrgeble battery running 1 year service warranty only with spares and labour charge are extra. to diesel and petrol running only, mini small fogging machine to spray for mesquites no warranty product to use diesel and mini gas can, the composition of malathion tech 5.0% based on 95% chain clay 10% soapstone, toilet cake or odonil fragrance of wash room purpose only, bamboo ladder, mop small cloth to use office table and chairs cleaning purpose only, clip mop set it use moping purpose to office only, apron, sodium hypo chloride, weed control chemical, mask branded, gum boots branded, pvc hand gloves 16 inches, coco broom, soft broom, toilet cleaning acid, malathion oil 5.0% e.c, pesticide (fogging chemical with water mix), fogging chemical (with fuel mix), black phenyl, white scented phenyl, alum crystal, malathion dust 5.0%e.c, bleaching powder 33% chlorine, safety helmets, sanitizer

CTN :40675041

19 Jun, 2025 28.77 Lacs

Multi City - Karnataka

Tender For short term re-tender for the supply of cleaning and other materials to namma clinics of bbmp - buckets 25 ltrs, mug, floor mats, phenyle- 5 litres, mops, brooms, chlorine solution, id cards

Car Spray Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector