Latest carbon anode Tenders | Government carbon anode Tenders

CTN :40977599

21 Jul, 2025 NA

Dimapur - Nagaland

Tender For supply of aluminium conductor isi marked with working voltage upto 1100 volt roll of 90 mtrs , flexible cable twin twisted roll of 90 mtr conforming to is , pvc sheathed unarmoured stranded copper conductor cable of size 1sqmm conforming to isi marked 90m roll , concertina coil 1050mm dia , mild steel corrugated galvanised cgi sheet 10 ft x 3 ft 0.63 mm thick isi marked , iron angle 10 ft long thick of size 55mmx55mmx3mm , oil filter element 6 kva genr set kirlosker , fuel filter 6 kva genr set kirlosker , over flow fuel pipe 6 kva genr set kirlosker , fuel pump assembly 6 kva genr set kirlosker , avr 3 phase 6 kva , air filter assembly 6 kva genr set kirlosker , head gasket 6 kva , fuel pipe 19mm x19mm 1 mtr long , oil filter 7.5 kva genr set kirlosker , fuel filter 7.5 kva genr set kirlosker , fan belt, 7.5 kva genr set kirlosker , air filter assembly 7.5 kva genr set kirlosker , self starter bush 7.5 kva genr set kirlosker , armature for self starter 7.5 kva genr set kirlosker , rectifier plate 7.5 kva genr set kirlosker , rotating diode 7.5 kva genr set kirlosker , alternator regulator tr-15 7.5 kva genr set kirlosker , water pump , fuel pipe 7.5 kva genr set kirlosker , oil filter element 63 kva genr set kirlosker , fuel filter 63 kva genr set kirlosker , fan belt a-51 , over flow pipe injector to fip 63 kva genr set kirlosker , fuel pipe 19mm x19mm 1.5 mtr long , fuel tank cap , volt mtr 0-500 vac -72 sqmm , volt meter , screw driver set taparia , cutting plier taparia , wire cutter taparia , ammeter 0-100 amp 72 sqmm , alternator mounting pad 63 kva genr set kirlosker , alternator carbon brush carrier 63 kva genr set kirlosker , alternator carbon brush 63 kva genr set kirlosker , 63 kva genr set kirlosker self starter solenoid , self starter bush set 63 kva genr set kirlosker , oil pressure sensor 63 kva genr set kirlosker , socket set taparia , 1.5 sqmm single core copper wire , oil pressure guage 63 kva genr set kirlosker , oil temp gauge , door hinge lh and rt , door lock lh and rt , float charger 12v dc , bty charger , bty sec lead acid 12v 180 ah , oil filter 40 kva genr set kirlosker , fuel filter 40 kva genr set kirlosker , air filter 40 kva genr set kirlosker , self starter kit 40 kva genr set kirlosker , hose pipe radiator to eng 40 kva genr set kirlosker , display control unit 40 kva genr set kirlosker , piston ring set 40 kva genr set kirlosker , piston assembly 40 kva genr set kirlosker , cyl head gaskit 40 kva genr set kirlosker , injector nozzle 40 kva genr set kirlosker , hose pipe v size , dc indicator lamp , ac indicator lamp , fan belt 40 kva genr set kirlosker , fuel pipe from tank to feed pump 1.5 mtr long 19mm x 19mm , fuel pipe from tank to feed pump 2 mtr long 19mm x19mm , fuel pipe from filter to fip 2 mtr long 19mm x19mm , overflow pipe from injector to tank common 4 cyl , benjo bolt 19 mm , benjo bolt 13 mm , nut bolt 3 inch long 17mm , nut bolt 2 inch long 22mm , nut bolt 1 inch long 22mm , tie pkt 250mm , high pressure pipe line , air filter 62.5 kva genr set , fan belt a45 62.5 kva genr set , fan belt 2jax 1310 , fuel filter assembly 62.5 kva genr set , oil filter 62.5 kva genr set , genr set contactor 62.5 kva genr set , engine oil , self tapping screws with ppdm washer 50mm long , air filter 50 kva genr set , fan belt a 1150 , fan belt b 1410 , fuel filter cotton type 50 kva genr set , oil filter 50 kva genr set , exhaust fan 50 kva genr set , hose pipe for air filter 50 kva genr set , avr 15 kva genr set , oil filter 15 kva genr set , fuel filter 15 kva genr set

CTN :40977572

28 Jul, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of pneumatic (air) starter , thermo element exhaust temp a bank after turbo , thermo element lo temp measuring , electrical heating element engine pre heating , 3p contactor 9a , 380v a/c 50hz , thermo transmitter exhaust b bank after turbo , pressure element cwp measuring , termo element cooling water temperature(323.805/001/004) , pressure meter 0-40 bar , pressure transducer , starting air , pinion and drive shaft , alternator pre-heating element , voltage control relay , thermo element exhaust temp b bank after turbo , pressure element lub oil pressure measuring , speed tachometer , f/i converter with level relay out put , pressure switch low pressure warning , buffer metalastik , pressure switch low lub oil pressure warning , pressure switch low start air press warning , pressure meter , alarm annunciator , tacho voltage detector u7 , pressure meter , pressure meter , engine control unit , cylinder head gasket (seal ring) , temperature meter , 2p aux relay 5a , 24vdc , 2p circuit breaker 10a , temperature meter , pressure switch , level switch lcwt warning , level switch cool water leak warning , termister control relay , temp switch high lub oil tem warning , temp switch engine pre heating on/off , temperature meter , temp switch hcwt shut down , temp switch hcwt warning , resister 3k3 1w (214-1210) , resister 120k 1w

State Government

CTN :40985778

28 Jul, 2025 1.80 Crore

Mohali - Punjab

Tender For purchase of sports physiotherpy lab equipments - focused shockwave therapy the device should be suitable for musculoskeletal use. should be a focused shockwave based on piezo mechanism. should have multi array type piezo electric hand piece. should have accuracy of the shock wave generation cycle(frequency)0~8 10% should have software-based operating system the unit should have large color touch screen for ease of operation. the unit should have accuracy of the operating frequency 0~7000shock 10% the unit should have maximum energy density 0.702 m j/ (when setting at 23 levels) 15% should have shock wave penetration depth 40 20%. should have maximum focus size. 78 1.78 15.81 20% should have maximum pressure 44.01 0.65 mpa the unit should be supplied with piezo hand piece and elastomer gel padas of 8 different sizes, 5mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, and 44mm. the life span of hand piece should be of up to 10 million shocks. should be supplied with trolley with castor wheels. dimension of the device should be approximated 500mmx700mmx 1000mm should have ce or usfda certified., high laser therapy should be class iv high level laser therapy system should have a real-time operating system technology should have maximum laser should be class iv high level laser therapy system should have a real-time operating system technology should have maximum laser power output of 15 watts should have wavelengths of 810 nm & 980 nm should have an aiming beam of 650nm, should have 2 operating modes: continuous wave or pulsed applicate and piece should have embedded finger switch and light, should have a technology to customize patient treatment based on conditions, body area, body type, skin type, chronicity and absorption characteristics applicator should have a fused silica composition massage ball at the point of contact of applicator and skin. pulse frequency: 2, 10, 20, 100, 200, 500, 1000, 2500, 5000 & 10000hz pulse duration: 50% duty cycle at any given pulse frequency setting, should have a 10 hd display touch screen with password protection to reach the home screen should be supplied with 2nos. of laser protection glasses power: 100-240v, 50-60 hz the unit should be supplied with 5 different types and sizes of treatment heads (large cone, large massage ball, flat window, small massage ball, and small cone. the unit should have inbuilt battery. electrical safety class: class i, type b weight should not exceed 4 kilograms (main unit; without applicators & accessories. must have class iii also., combination therapy machine with vaccum should have 3 independent electrotherapy channels, one ultrasound channel should provide multiple clinical waveforms including interferential (2 and 4 poles and isoplanarvector), tens (asymmetric biphasic &symmetric biphasic), han, russian, vms, surged(rectangular &triangular), hvpc, microcurrent, galvanic (continuous, interrupted and low level),rabert & dia dynamic cpid/cpiso should have independent parameter adjustments for each channel including intensity, frequency, duty cycle, vector scan, channel mode, phase duration, ramp, cycle time and treatment time based on waveform should have maximum output intensity up to 140ma should have constant current and constant voltage modes should have 2 colour coded lead wires for easy picking of selected channels should have suggested electrode placement guidelines ultrasound should offer 1 and 3 mhz frequencies should have the ultrasound bnr of 5:1 or lesser should be supplied with one 5cm applicator head should have pulsed & continuous frequency modes (10%, 20%, 50% & 100%) should have variable duty cycles of 16 hz, 48 hz &1 bb 00 hz should have facility to indicate applicator uncoupling should be able to use electrotherapy and ultrasound independently and also in synchronizedcombination of electrotherapy and ultrasound, where ultrasound head functioning as bothultrasound head and electrode should have minimum 7 high resolut

CTN :40403018

08 Jul, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of portable type dual dc power supply unit , phase sequence indicator disc type , phase sequence indicator digital type , high voltage detectors , digital insulation tester , 110v dc power supply 5 kw capacity , digital clamp meter , ac 230v socket polarity and earth leakage

CTN :40949316

23 Jul, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of high voltage rectifier transformer for unit-iv esp.note:1. prospective bidders may get the specification free of cost by downloading from the following websites.tangedco www.tangedco.gov.innic https://tntenders.gov.in/nicgep/apptender opening (electronically):o/o the superintending engineer/p&a/ttps tuticorin. (executive engineer/sp/ttps)

corporations/Associations/Others

CTN :40941598

23 Jul, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of high voltage rectifier transformer for unit-iv esp

Central Government/Public Sector

CTN :40946160

14 Jul, 2025 NA

Bhusawal - Maharashtra

Tender For supply of led based driver and assistant desk illu [led based driver and assistant desk illumination lamp as per clw specn. no. clw/es/3/0042 alt.d. technical specification: 1) operating voltage 18 to 30 v dc, with normal voltage of 24 vdc. 2) high and low glow switch has to be provided.3) the lamp unit shall have inbuilt reverse polarity, over voltage trip, spike and surge protection.4) mechanically the housing shall be as per clw spec. no. clw/es/3/0042. alt.d]

Central Government/Public Sector

CTN :40918261

28 Jul, 2025 NA

Multi City - Multi State

Tender For supply of suppy of 1.15 kw (ieh-15a) high frequency mosfet based solid state power source having fr equency of 30-100 khz and max input current as 32 amp. it includes following items: a) mosfet based, wate r cooled high frequency induction heating power source with safety indicators and protection for over curr ent, water lack, water flow phase fail etc. b)operating voltage: 220v 50hz c) dm water circulation unit. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40798434

15 Jul, 2025 NA

Shillong - Meghalaya

Tender For supply and installation of set of equipment/items for physiology department as per nmc at shillong medical college, shillong under the directorate of health services medical education & research (dme). - sherrington starling kymograph (electrically driven), myograph stand, inductorium, simple key, short circuiting key, pohl's commutator, vibrating interrupter, muscle trough, muscle lever, muscle grip of femur clamp, hook and weight set, heart lever (simple &starling), frog board for dissection, enamel tray, low voltage unit for tapping 2 and 4 volts for stimulation, electromagnetic time marker, tuning fork time marker 100/sec, electrodes, x-blocks, spirit lamps, marey's tambour, microscopes, oil immersion, demonstration eye piece, double demonstration eye piece, stage incubator, westergren's pipette for es.r. on stand(with space pipette), wintrobe's tube for esr and pcv with stand, perimeter pristely smith s/lp.984 b & t, hemoglobin-meter sahli's or hellige (with spaces), hemocytometer, sphygmomanometer (digital) (mercury based instruments to be replaced with suitable alternatives)., stethoscopes, stethoscopes, demonstration with multiple ear pieces, polygraphs, venous pressure apparatus, spirometer, ordinary (vitallograph), gas analysis apparatus, halden's student type, van slyke's apparatus manometric, gas analyser automatic for co2, o2, n2, douglas bag, complete, basal metabolism apparatus, mosso's ergograph, clinical thermometer (mercury based instruments to be replaced with suitable alternatives), compass aesthesiometer, thermo-aesthesiometer, algometer, apparatus for passive movement, knee hammer, stethograph, bicycle ergometer, offactometer, ophthalmoscope, schernatic eye, perimeter with charts (lister's), tuning fork to test hearing 32-10000 cps(sets-100, 256, 512 hz), color perception lantern edridge green., maddox rod, newtons color wheel, dynamometer, otoscope, stop watch, multi-channel physiograph, 3 channels, complete with accessories, student plusionranh tringla channall with accura, centrifuge, high speed with technometer, colorimeter, photoelectric, ph meter electric, electronic stimulator, thermometers, balances, microslides and glassware, digital physiograph, ecg machine, reagents, harvard step, otorhinolaryngoscope, sterilizer electrical, instrument trolley, refrigerator, oxygen cylinder with trolley, co2 cylinder with trolley, water distillation steel with spare heating elements, all glass distillation apparatus double stage, voltage stabilizer, interactive smartboard for classroom, digital perimeter, digital spirometer, digital ecg machine, electronic stimulator, general, store racks, electric and water points with sink and eye wash stations, laboratory glass wares, pipettes and micropipettes, test tubes and vials, test tube stand

Central Government / Public Sector

CTN :40873983

24 Jul, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of led based driver and assistant driver desk illumination lamp. technical specification:- 1 ) operating voltage 18 to 30v dc , with nominal voltage of 24v dc. 2) high and low glow switch has t o be provided. 3)the lamp unit shall have in built reverse polarity, over voltage trip, spike & surge pro tection. 4) mechanically the housing shall be as per clw specification no. clw/es/3/0042 alt d or late st. [ warranty period: 30 months after the date of delivery ]

Carbon Anode Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector