Latest carding machine Tenders | Government carding machine Tenders

Central Government/Public Sector

CTN :43163473

02 Jan, 2026 NA

Roorkee - Uttarakhand

Tender For customized autosampler system for automated plant volatile collection and injection

CTN :43188066

03 Jan, 2026 NA

Palampur - Himachal Pradesh

Tender For purchase of the equipments/ machines (non-woven needle punch machine, carding machine, fibre extraction machine, tearing machine and small equipments in the department of textile and apparel designing, cocs, cskhpkv, palampur

CTN :43188320

02 Jan, 2026 5.27 Crore

Jodhpur - Rajasthan

Tender For supply of heat engine equipments c c - auto electrical test benc , air bag simulator , automotive exhaust 5 gas analyser and diesel smokemeter , fuel injection test bench for calibration of fuel pump , multi scan tool with oscilloscope , demonstration board of mpfi system working model , working model of torque converter model of lmv , tandem master cylinder with booster working model , ultrasonic injection cleaning equipment , dual magnetization yoke , injector cleaning unit technical specification , spring tension tester technical specification , synchronous gear box with stand for gear box , tandem master cylinder with booster brand new , tube and tyre vulcanizing machine , tyre changer machine

CTN :43168135

25 Dec, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of modernisation of automotive lab c c--fuel operated static run engine of hmv tata 6x6 , electrically operated actual cut model of transfer case assembly tc-2500 , dynamic cut model rear axil assembly with electric motor drive , dynamic actual cut model of steering system of hmv tata 6 x 6 , dynamic cut model of front axle assembly with electric motor drive , fuel operated actual working model of tata safari strome gs800 half cut body , fuel operated actual working model of gypsy mpfi 413w mpfi half cut body , actual working model of mpfi multi point fuel injection sys of maruti gypsy , axle assembly rear actual cut model with electric motor operated , actual working model excavator control valve assembly , actual working model loader control valve assembly , cut section model of parts of jcb super 3dx, hmv tata 6 x 6, safari, scorpio , tools for practice training

State Government

CTN :42957218

22 Dec, 2025 4.69 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : procurement of spares for nitrogen injection fire protection system (nifps) for 125 mvar reactors installed at 2x600mw, sstpp, mppgcl, dongalia

Central Government/Public Sector

CTN :43151758

27 Dec, 2025 NA

Bokaro - Jharkhand

Tender For supply and installation of hydrogen injection system in bf-1, bokaro steel plant, bokaro (jharkhand)on turnkey basis.

CTN :43182031

18 Dec, 2025 NA

Vijayapura - Karnataka

Tender For supply, erection, installation, and commissioning of the machinery & equipment hydraulically operated fully automatic plastic blow moulding machine, single station & double head. with accessories, horizontal type plastic injection molding machine, with accessories capacity: 1 to 50 ton per day ,plastic injection handle moulds (dies), cooling tower specification (5 tr for blow moulding machine) accessories: water level indicator, drain valve, overflow ,9" plastic scrap grinding machine -100 kg/hr ,electronic weighing scale, capacity 10 kg ,electronic weighing scale 150kg / 200kg capacity, 10gram accuracy, stainless steel platform rechargeable industrial platform weighing scale ,weight measuring machine for industry, ,cutting machine (assam grass & coir leaf) ,broom pouch packing machine, capacity:100-600 pouch per hour ,packaging machine - smart pack single semi-automatic strapping machine sps 405 ,mild steel trolley mounted abc type fire extinguisher for industrial ,abc powder map90 fire extinguisher (4kg) ,hand tools -250 nos (wooden stool, tying frame: scissors, knives & clamp.), spv office furniture & equipment s ( 1 nos desktop computer, 1 nos , b/w barcode printer, 1 nos. b/w leazer jet printer, 3 office tables 4 nos executive chairs 4 nos guest chairs, 1 nos office almirah for file storage, 1 nos. drawer steel filing cabinet) ,5 working tables (4x7 feet wooden top ms legs) &(h7'x w3') 4 no finished products storage racks(steel) ,installation of equipment & electrical wiring ,cctv camera full hd 2.4mp security camera and with accessories (wires and fittings etc.) (12 channel), ht electricity transformer including connection ,solar20 kw off/on grid solar system for offices, commercial ms roof top installation

State Government

CTN :42990180

17 Dec, 2025 5.23 Lacs

Varanasi - Uttar Pradesh

Tender For corrigendum : installation of nitrogen injection fire protection system (nifps) on tal make 220/33kv 60mva transformer-ii - installation of nitrogen injection fire protection system (nifps) on tal make 220/33kv 60mva transformer-ii at 220 kv substation bhelupur

CTN :42579205

26 Dec, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of schedule iv (x-ray films, chemicals, e. c. g. rolls, materiels etc.) - schedule iv (x-ray films, chemicals, e. c. g. rolls, materiels etc.), polyster base round corner x-ray films (8" x 10") green sensitive, blue base with base fog less than or equal to 0.23 & dmax not less than 3.10 interleaved. the density values should be met at developer temperature 32 c to 35 c, polyster base round corner x-ray films (10" x 12") green sensitive, blue base with base fog less than or equal to 0.23 & dmax not less than 3.10 interleaved. the density values should be met at developer temperature 32 c to 35 c, polyster base round corner x-ray films (12" x 15") green sensitive, blue base with base fog less than or equal to 0.23 & dmax not less than 3.10 interleaved. the density values should be met at developer temperature 32 c to 35 c, dental x-ray films intraoral periapcal the density values should blue base with base fog less than or equal to 0.20 & dmax not less than 3.10 the density values should be met at developer temperature 32 c to 35 c, liquid developer replenisher for automatic processor (starter solution, if recommended by the manufacturer, should also be supplied), ( price of item no. 5 and item no. 6 will be considered as a unit), liquid fixer hardner for automatic processor ( price of item no. 5 and item no. 6 will be considered as a unit), inj. meglumine diatrizoate sodium diatrizoate iodine content 365-375 mg/ml in 20 ml. ampoule/vial, pigtail angiography catheter with multiple side holes length 65 to 75 cm 5f, inj. gadolinium based contrast for mri for liver/liver specific (should provide details of compound being hepatobiliary specific), inj. gadolinium based contrast for mri for general use, inj. gadolinium based contrast for mri for angiography, disp lure lock syringes 3 ml. for glue injection, disp lure lock syringes 1 ml. for glue injection, x-ray folders laminated 250 gsm 14 1/2" x 17 ", dual pack 200 ml syringe with aspirator, "y" shaped coiled tube y-tube sterile, non-pyrogenic (minimum 300 psi & above) compatible with dual head pressure injector ( lf/medrad/ sea crown / spectra / apollo), extension "y" shaped coiled tubing for injector 150 cms. (-5 or +15cm) low pressure (minimum 300 psi & above), dual disposable syringes (60 to 65 ml each) with "y" or "t"shaped coiled tube connecting tubes small spike for contrast and large spike for saline compatible with mri injector (lf or medrad)., one way stopcock (high pressure), low pressure extension "y" or "t" shaped coiled tubing min. 150cms (-5 or +15 cms) with coiled connecting tubes & small spike for contrast & large spike for saline for medical mri injector., flavoured, ionic, water soluble, oral contrast iodine content 240-250 mg/ ml. in 30 ml, bernstein catheter 4 f 100 cm, bernstein catheter 5 f 100 cm, chiba needle 21 g 15 cms length, chiba needle 22 g 15 cms length, disposable c t scan pressure injector syringes (190 ml syringe + quick fill tube) for bayer medrad salient injector (toshiba / canon), extension "y" shaped coild tube adapter dual check valves (minimum psi 300 & above), nonionic iodixanol isoosmolar, 320 mg 50 ml, disposable mri syringes kit for 65/115 mr injector system 65 ml contrast syringes and 115 ml ns syringes with connecting tubing combo pack for spectris solaris medrad pressure injector, spring loaded fully automatic and semi automatic biopsy instrument with adjustable penetration depth of 18 mm and 25 mm. having trocar tip with dimpling on needle and fire ready indicator. 14 g & 10 cm in length, spring loaded fully automatic and semi automatic biopsy instrument with adjustable penetration depth of 18 mm and 25 mm. having trocar tip with dimpling on needle and fire ready indicator. 16 g & 10 cm in length, coil shape breast tissue marker with both front trigger & an alternate rear trigger, should be visible in ultrasound, mammography and mri, extension coiled tube with integr

CTN :42579207

26 Dec, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of sch viii (supply of needle & syringes) - sch viii (supply of needle & syringes), disposable needle sterile length 1/2" guage 25, suture needle, half circle triangular nos. 2 to 20 (cutting), insulated needle for use with peripheral nerve stimulator 22g x 2" x 50 mm., insulated needle for use with peripheral nerve stimulator 22g x 35 mm., insulated needle for use with peripheral nerve stimulator 24g x 1"x 25 mm., echogent needles for usg guided peripheral nerve blocks 20g / 21g x 100 mm., echogent needles for usg guided peripheral nerve blocks 22g x 50 mm., epidural needles 16 & 18 guage 7.5cm to 11cm (disposable), epidural needles (long length) 18g (more than 100 mm. length), sterile disposable lancet size 28-32 (plastic lancet needle type), sterile disposable hypodermic plastic syringe 20cc, cn. with leur lock, hypodermic syringes,disposable sterile, sterile pack,with/without leur lock, hub 1ml syringe with marking at 0.1 ml, asepto syringe 100 ml of heavy plastic barrel and rubber bulb with marking., bag arm rubber with cover for b.p. apparatus, adult size velcro.rubber bag size 13 x 23 cms., keratome, size 2.8 mm, type-regular(ophthalmic), angle-45 degrees, bevel type- bevel up (pointed)blade-stainless steel/carbon steel,handle- polycarbonate, use- disposable single use, mvr, gauge 23g type-regular(ophthalmic), blade-stainless steel handle- polycarbonate, use- single disposable use, triple lumen catheter 7.5fr with 14g distal lumen, length-15cm. kit contain 1 teflon-coated j nitinol guidewire particularly kink-resistant with guide-advancer. 1 dilator, 10cm long, 3 injection caps, 3 clamps,1 supplementary fixation wing,1 scalpel, 1 syringe 5 ml, 1 adaptor for pressure transducer, 1 puncture needle 18g, 70mm long with a pre-connected valve to aviod air embolism and blood loss, 18g short iv cannula, double lumen subclavian/ jugular catheter kit (adult) ptfe (teflon) cannula curved od 2.7/d 11.5fr-12fr/chx5.3in. (3.8 mm x 13.5 cm) 6 side holes silicon tube s clamping extension, clamp luer lock "y" connector with protective caps size 12.5, 15 with guide wire introducer needle, dialator , 3fr double lumen cvc catheter with 60mm double-lumen polyurethane central venous catheter inserted by seldinger technique, radio opaque material for catheter, the user should be able to choose from 2 type of introducer, i.e.needle 23g or i.v. cannula 22g, latex free, the central venous catheter set should contain: 1 double-lumen polyurethane 3fr catheter, 1 short i.v. cannula 22g, 1 introducer needle 23g, 1 kink resistant guidewire with soft flexible tip, dilator with cylindrical /pencil point tip, 1 secondary fixation wing, 2 injection caps, 1 scalpel, 1.5 ml syringe, peripherally placed radiopaque central single lumen catheter. guage 14/16 (100%) (needles size/catheter size) length - 55cm - 70cm, peripherally placed radiopaque central single lumen catheter. guage 18/20 (100%) (needles size/catheter size) length 30cm - 45cm, fully radiopaque pur catheter 16g for femoral artery centimeter marking from 5-15cm, winged hub for skin fixation, supple distal tip. kit should contain 1 pur catheter with xro lines,1 puncture needle, 1 j guidewire with wishbone-type guidewire advancer, 1 dilator, radial/femoral arterial pe catheter with antikinking collar & fixation wings,straight guide wire, introducer needle.catherter size g- 18, length 10cm, radial/femoral arterial pe catheter 20g, 8cm puncture needle is fitted with a visualization chamber allowing to confirm that the vessel punctured is an artery (pulsatile movement of the blood). the needle is also fitted with a silicone bloodless system valve to avoid loss of blood during vessel puncture and a funnel hub to facilitate the insertion of the guidewire, peripherally inserted central catheter with guide wire with peelable cannula, made of polyurethane, non-toxic, with radio opaque line throughout the catheter with marking every cm with leur connector at proximal en

Carding Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government