Latest cargo handling equipment Tenders | Government cargo handling equipment Tenders

corporations/Associations/Others

CTN :36275489

27 Jun, 2024 2.42 Crore

Delhi - Delhi

Tender For supply, installation, testing, commissioning & handling over of cutting machine with lift jogger and automatic piling size 45 inches for gip, minto road, new delhi

CTN :36270119

28 Jun, 2024 NA

Nagpur - Maharashtra

Tender For nit of procurement for supply of non-consumable items for ivf lab for obstetrics and gynaecology department - syms iii sealer for cbs high security straws and tubes. the syms iii sealer is a benchtop thermal sealer unit that is e used under a laminar flow hood to weld cbs high security straws, high security tubes, and hsv high security vitrification straws. it uses an automatic detection system (it uses pre- set specific combinations of seal temperature, time and jaw position for each cbs device). the syms iii sealer is designed to heat seal cbs high security 0.3 ml, 0.5 ml and cbs high security vitrification straws, and the cbs high security tube, for optimal cryopreservation of biological samples. color touch screen should be compatible with the use of laboratory gloves should display machine cycle display: pre-heating, ready status and sealing in progress should have two sealing modes: automatic detection or operator-controlled via the touch screen should display fault signal with messages and alarms should be able to display and tracking of maintenance modes should be easy to clean and service. dimensions (l x w x h): 335 x 250 x 105 mm with 5 years warranty., hsv straw cutter opening device for hsv vitrification straws hold the straw partly immersed in liquid nitrogen and gently remove the top of the outer straw using the straw cutter, with no risk of damaging the inner straw. with the top of the outer straw cut, the inner straw can be removed and placed in the warming solution immediately. 9.5 in h x 4.5 in w x 2.5 in d, portable label printer portable benchtop printer. the entire label should be visible on the display. the printer should be easily used as a stand-alone printer. use for barcode labeling 9.5 in h x 4.5 in w x 2.5 in d display type: monocolor lcd screen keyboard type: abc, cyrillic memory: 16 mb (2 mb available for storage, stores 12 labels) mode of operation: stand- alone mode device connectivity: stand- alone number of printers in kit: 1 number of symbols :104 auto shut off: 10 minutes recharge time: 2.5 hours barcode capability: barcode capable color printing capability: single color font sizes: 6-40 pt maximum print speed: 0.4/s print resolution: 203 dpi print technology: thermal transfer catridge printer series: m21 series (m21-) label material types: heat- shrink polyolefin, nylon cloth, paper, polyester, polypropylene, self- laminating polyester, self- laminating vinyl, vinyl should include: 1) printer 2) nylon cloth patch panel 3) wire and cable labels 4) quick start guide, liquid nitrogen transportation trolly this trolley should be made of mild steel, should have a capacity of more than 30 liters, and can carry up to 150 kilograms. its used to handle cryogenic containers and has a color coated finish., denudation and handling pipettes micropipettes designed for manipulation and transfer of oocytes and embryos during ivf procedures. non-breakable plastic tips that will not scratch the dishes should be compatible with all pipettors. should have medical grade plastic tip fitted with a flexible bulb for a reliable seal and simpler set-up. should have an autoclavable squeeze handle which is designed to offer ease of handling and a comfortable working position. single-use denudation and handling system has been developed for exacting laboratory sterility standards minimising any risk of cross contamination. are designed for manipulation and transfer of oocytes and embryos during ivf procedures. features. precise - adjustable aspiration volumes., partical count and voc meter this product gives information about the air quality present in the ivf lab. usage: measuring and control voc level in the room theory: measure and control iaq level with relay output output: relay out to control a ventilator or air-purifier brand: voc monitor and controller voltage-supply: 230v ac operating temperature: - 20 c~60 c (-4 f~140 f) mounting type: wall-mounting (optional) resolution (bits): 0.1ppm measuring range: 0~30p

CTN :36269510

14 Jun, 2024 NA

Jammu - Jammu And Kashmir

Tender For rate contract for supply of spares-minor stores andp-equipment-hardware items required from time to time for day to day operation- maintenance-construction of distribution power network of electric division-iii jammu during the financial year 2024-25 - 11 kv disc fittings g.i heavy duty b&s, 11 kv disc fittings g.i heavy duty t&c, 11 kv disc insulator porcelain b&s 45 kn (conforming isi standards), 11 kv disc insulator porcelain b&s 70 kn (conforming isi standards), 11 kv disc insulator porcelain t&c 45 kn (conforming isi standards), 11 kv disc insulator porcelain t&c 70 kn (conforming isi standards), 11 kv drop out set heavy duty, 11 kv hg set (heavy duty), 11 kv la set porcelain (line type) (heavy duty) (conforming isi standards), 11 kv la set porcelain (station type) (heavy duty) 10 ka (conforming isi standards), 11 kv la set porcelain (station type) (heavy duty) 5 ka (conforming isi standards), 11 kv link operating rod (made of fibre glass 30 mm dia, 18 length, with 1 mtr 12 kv insulated handling portion), 11 kv link set 16 size 50x6mmx420mm, 11 kv pin insulator porcelain 10 kn (conforming isi standards), 11 kv pin insulator porcelain 5 kn (conforming isi standards), 11 mtr long s.t pole (st-410, sp-56), 110 w led street light (make : syska / bajaj / havells / crompton / any other reputed company make), 11kv disc insulator (polymeric) 45kn, t&c/b&s (conforming isi standards), 11kv la set line type polymeric (conforming isi standards), 11kv la set station type polymeric (conforming isi standards), 11kv pin insulator with pin (polymeric) (conforming isi standards), 120 w led high mast light (make : syska / bajaj / havells / crompton / any other reputed company make), 140 w led high mast light (make : syska / bajaj / havells / crompton / any other reputed company make), 3-phase, 3 wire trivector meter (secure make), prodigy meter (secure make), ct-pt combine unit with trivector meter, ct-pt combine unit, al. jointing sleeves, al. thimble 120 mm heavy duty (conforming isi standards), al. thimble 185 mm heavy duty (conforming isi standards), al. thimble 300 mm heavy duty (conforming isi standards), al. thimble 400 mm heavy duty (conforming isi standards), al. thimble 630 mm heavy duty (conforming isi standards), al. thimble 95 mm heavy duty (conforming isi standards), aluminium brazing rod, aluminium folding ladder 20 long, aluminium lugs 16 mm2, aluminium paint, angle iron 40x40x5mm, angle iron 40x40x6mm, angle iron 50x50x6mm, angle iron cutter with 3-phase motor, anti climbing device, back clamp for pcc pole/st pole, bamboo ladder 20 long, bamboo ladder 10 long, bamboo ladder 15 long, bimetallic clamp (ht), bimetallic clamp (lt), bus bar insulator (conforming isi standards), chain block of capacity (1 mt), chain block of capacity (2 mt), chain block of capacity (5 mt), chain link fencing 6-0", change over switch (400 amp) (heavy duty) (conforming isi standards), change over switch (100 amp) (heavy duty) (conforming isi standards), change over switch (200 amp) (heavy duty) (conforming isi standards), change over switch (63 amp) (heavy duty) (conforming isi standards), channel iron x-arms 100x50x50x6mm (ismc), channel iron x-arms 75x40x40x6mm (ismc), clamp tester (waco make), come along/rachet, crimping tool hydraulic (with dies 50 mmsq, 95 mm sq, 120 mm sq, 185 mm sq, 300 mm sq , 400 mm sq & 630 mm sq) of standard company conformin to is standard, cutter blade, digital clamp tester/meter (0-1000 amp) ac/dc motwani make, drill bit 16mm (heavy duty), drill bit 20mm ( heavy duty), drilling machine with 3-phase motor and stand (heavy duty), earth tester (waco make), internet energy meter (net meter), flat iron 40x6mm, flat iron 40x5mm, flat iron 50x6 mm, g.i flat 25x3 mm, g.i. wire (8 swg), meter seals, 11 kv go ab switch comp with pipe 5 mtr & operating handle, (3-phase, 3-pole, 200 amp vertical type), guy insulator lt/ht (conforming isi standards), hand gloves rubber insulation level 1.1 k

Central Government And Public Sector

CTN :36029059

06 Jun, 2024 6.70 Lacs

Kullu - Himachal Pradesh

Tender For corrigendum : providing of custom bid for services - servicing and supply of spares for sf6 gas handling plant dilo make machine b2000r01129749 at power house of parbati iii power station

State Government

CTN :36242648

06 Jun, 2024 NA

Jamnagar - Gujarat

Tender For work for operating jcb machine for various areas in ash handling plant on as and when required basis at sikka tps.

CTN :36212139

12 Jun, 2024 NA

Guwahati - Assam

Tender For procurement of cng booster compressor (2 years arc) - 400 scmh electric motor driven cng booster compressors, design, engineering, manufacturing, supply (including packaging and forwarding, insurance, handling, loading and unloading at port and delivery & unloading at clients store / site of skid mounted 22 kw electric motor driven hydraulic cng compressor package of average 400 sm3 / hr capacity at suction pressure of 30 kg/cm2 and discharge pressure 255 kg/cm2 (variable suction pressure range 30 to 200 kg/cm2) the package shall be inclusive of: a) string test of complete compressor package with air/nitrogen along with electric motor and accessories at packagers factory. b) special tools & tackles (list and price of each tools and tackles to be furnished by the bidder separately in price bid) c) design, engineering, manufacturing, supply (including packaging and forwarding, insurance, handling and unloading at clients store /site of air compressor of capacity approx 1.5 kw, discharge pressure approx 7 kg/cm2g , min 100 water litre air receiver and air dryer along with all accessories and auxiliaries.location-wise (tentative) quantities:cachar, hailakandi & karimganj ga- 5 nos.kamrup & kamrup metropolitan ga- 11 nos.stores/sites: silchar and guwahati, unit inland transportation upto delivery location and other costs incidental to delivery of goods, installation, commissioning, testing (item no 2.0 of mr), installation, commissioning & field performance test of compressor package including air compressor system at site(item no 2.1 of mr), total amount for supply,freight,installation,testing & commissioning (inclusive of taxes) based on quoted price, services for operations (item no 3.0 of mr), operation charges for 1st year i.e. during warranty period for 2 nos shifts(each shift of 8hrs) for cachar, hailakandi & karimganj ga (5 machines x 12 months x 2 shifts = 120 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.50% of rate of item no. 1.1 quoted by the bidder., operation charges for 2nd year for 2nos shift (each shift of 8hrs) for cachar, hailakandi & karimganj ga (5 machines x 12 months x 2 shifts = 120 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.55% of rate of item no. 1.1 quoted by the bidder., operation charges for 3rd year for 2nos shift (each shift of 8hrs) for cachar, hailakandi & karimganj ga (5 machines x 12 months x 2 shifts = 120 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.61% of rate of item no. 1.1 quoted by the bidder., operation charges for 4thyear for 2nos shift (each shift of 8hrs)for cachar, hailakandi & karimganj ga (5 machines x 12 months x 2 shifts = 120 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.67% of rate of item no. 1.1 quoted by the bidder., operation charges for 1st year i.e. during warranty period for 2 nos shifts(each shift of 8hrs) for kamrup & kamrup metropolitan ga (11 machines x 12 months x 2 shifts = 264 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.50% of rate of item no. 1.1 quoted by the bidder., operation charges for 2nd year for 2 nos shift (each shift of 8hrs)for kamrup & kamrup metropolitan ga (11 machines x 12 months x 2 shifts = 264 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.55% of rate of item no. 1.1 quoted by the bidder., operation charges for 3rd year for 2nos shift (each shift of 8hrs) for kamrup & kamrup metropolitan ga (11 machines x 12 months x 2 shifts = 264 machine shift months)note: the quoted rate for one machine shift month must be equal to or more than 0.61% of rate of item no. 1.1 quoted by the bidder., operation charges for 4thyear for 2nos shift (each shift of 8hrs) for kam

State Government

CTN :36179413

24 May, 2024 1.60 Lacs

Sikka - Gujarat

Tender For work for operating jcb machine for various areas in ash handling plant on as and when required basis at sikka tps.

State Government

CTN :35347033

18 May, 2024 7.39 Lacs

Kheda - Gujarat

Tender For corrigendum : the work of operation & maintenance of mobile coal sampling equipment (auger machine) at coal handling plant, wtps.

State Government

CTN :36127727

13 May, 2024 1.60 Lacs

Sikka - Gujarat

Tender For work for operating jcb machine for various areas in ash handling plant on as and when required basis at sikka tps

State Government

CTN :36121685

15 May, 2024 NA

Kheda - Gujarat

Tender For supply of material handling & miscellaneous items for routine, preventive, predictive & corrective maint. at unit #7, wtps.- hand platform truck for material handling, hydraulic hand pallet truck capacity: 2.5 ???, box trolley of size 1.25m lx 1 mw and 2 ton capacity, aluminium self supported extension ladder, size: 12 feet and extended up to 21 feet approx., panel cutting machine, type- jigsaw, bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, wolf make air blower, rotary selector switch capacity- 12amp 3 way no-off 3 position 60 degree,kaycee make cat no-2t16c, dc voltage transducer, type-tra- 431, measuring range: 0-75 mv dc, i/p: 0-75 mv; dual o/p: 4-20 ma,0-500 ohms, class: 0.5, aux supply : 240 v ac., ac current transducer, type-tra- 170, measuring range: 0-1500 a ac, i/p: 0- 1 a: single o/p: 4-20 ma,0-500 ohms, ct: 1500/1 a; class: 0.5, aux supply: 240 v ac., motorised chain pulley block,, capacity: 03 ???, single phase electrical extension board, three phase electrical extension board, kaycee make rotary cam switch type:2t26b, test leads (probes) for digital multimeter, cable tie for electricals wires & cables.

Cargo Handling Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

State Government

State Government

State Government

State Government

State Government