Latest carpentary work Tenders | Government carpentary work Tenders

CTN :40388310

11 Jul, 2025 NA

Mumbai - Maharashtra

Tender For bid to ras supply of plywood , t face veneer , french polish , teak wood batten , teak wood beading , teak face plastic , teakwood beading , teak wood beading , fevicol , looking mirror , prelaminated partical board , looking mirror of table dressing gents o , gloves for polishing work , chandras , raw saina powder , malmal cloth whith , screw , nails , sand paper , nails wire , light sensor control , modular switch , modular bell push switch , two module fan regulator , two module socket , altock gp calcium baseds clorine , bleaching powder , alum , ht selfbonding tape , motor with blade copper winding motor , pvc waste coupling , stainless steel curtain rod , pvc corrugated waste pipe , door stopper , pvc flushing tank handle low lavel , ss grating , shower rose , brass spindle , cp jet spray , curtain rod , white cement , pvc floor trap , cp shower rose , ss soap dish , pvc u pipe 15mm , ss continous piano hings , cp waste coupling , pipe bends , flush pipe , nails 1 , water tank , plain glass , frosted glass bid number/ & ( * ) : gem/2025/b/6187279 dated/ + : 19-05-2025 bid document/ 3 3 1 / 56

CTN :41011930

19 Jul, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of repair of saw hack power machine fault noted motor burnt scope of work rewinding of motor , repair of tyre change jumbo fault noted gear teeth worn out motor burnt scope of work gear teeth to be repair motor rewinding , repair of tractor power track fault noted floor top damaged scope of work replacement of floor top , repair of radiator of three tonne fork lifter eqpt no three one nine eight nine fault noted leakage scope of work leakage repair , refilling of argon gas cylinder , repair of chop saw fault noted field coil burnt armature burnt ball bearing faulty carbon brush faulty scope of work replacement of above items , repair of wood saw fault noted field coil burn armature burnt bearing cover broken both bearing and carbon brush broken scope of work replacement of above items , repair of iron cutting machine fault noted field coil burnt armature burnt bearing faulty carbon brush faulty scope of work replacement of above items , repair of jig saw machine fault noted field coil burnt armature burnt bearing faulty carbon brush faulty scope of work replacement of above items , repair for washing plant caustic tank fault noted motor burnt scope of work motor rewinding , repair for fifteen kva gen set fault noted self starter burnt scope of work repair of self starter

CTN :40993514

17 Jul, 2025 NA

Manavadar - Gujarat

Tender For rate contract for fire wood for crematorium , animal catching service , vehicle repairing , computer printer repairing and hardware supply work , stationery items , tent service , printing work , vehicle hiring , etc.

Central Government And Public Sector

CTN :40996400

21 Jul, 2025 39.09 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For dismantling, restoration and plaster work, providing and lying of stone paving, providing /preparation of iron railing with traditional design, providing and fixing 1st class budloo wood work for scantling wrought framed and fixed in position.

Central Government/Public Sector

CTN :40746664

15 Jul, 2025 49.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : periodical services(internal) including repairs to flooring,sanitary and plumbing items works in otm and md accn at ridge, raulki area under age b/r-i of ge satwari - notes : (1) work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions., taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each and removing from the site complete all as specified & directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed., demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed., taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed., dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, s&f pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick bwp commercial plywood .the size of rail and stiles as per is: 1003(part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed., s&f factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed, m&l for 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed., s&f in repair solid pvc door frame of size 50mm x47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening

State Government

CTN :40965798

15 Jul, 2025 5.00 Lacs

Multi City - Maharashtra

Tender For supply of t & p material for line staff under vita division. - taparia make plier (product no-1621-8) is-2615:1989 reaffirmed year 2019, lt line tester with neon bulb (green handle, overall length 125 mm, "taparia " make (product no-814), supply of lineman safety zoola, with garware make 12mm dia. pp rope, with m.s. hook made out from 12 mm diameter m.s. round bar, teak wood plank 475x100 x25 mm & gi thimble., seam less 11kv rubber hand gloves, as per current is specification for electrical work, 355 mm long good quality, 'crystal' make, having test potential 11 kv working potential 1100v. is-13774:2021 (iec 60903:2014), seam less 33 kv rubber hand gloves, as per current is specification for electrical work, 380 mm long good quality, 'crystal' make, having test potential 33 kv working potential 7500v. is-13774:2021 (iec 60903:2014), pvc insulated screw drivers, taparia make of following sizes blade length 100 mm blade dia 5mm (product no. 9341), pvc insulated screw drivers, taparia make of following sizes blade length 150 mm blade dia 5mm (product no. 9361), pvc insulated screw drivers, taparia make of following sizes blade length 225 mm blade dia 8mm (product no.8271)

CTN :40977135

20 Jul, 2025 NA

Dhrol - Gujarat

Tender For rate contract for valve repairing work , welding work , drinking water pipeline work , computer repairing work , vehicle repairing , bore work , wood for crematorium , street light maintenance , etc.

CTN :40978424

21 Jul, 2025 1.85 Lacs

Kolkata - West Bengal

Tender For special repair work at rhe 48 tangra road for repairing of flat no a4 atype flat by rendering plaster work wood work s and p works wall putty painting with allied works

State Government

CTN :40984688

14 Jul, 2025 3.21 Lacs

Shimla - Himachal Pradesh

Tender For construction of sewerage and sullage waste line from nursing hostel and kitchen to m.c . main line and disposal of waste. (sh - earthwork, sewerage line work behind hospital kitchen and wood work in hospital store etc.).

State Government

CTN :40985589

14 Jul, 2025 37.42 Lacs

Jammu - Jammu And Kashmir

Tender For modernization of balance rooms of circuit house by way of providing new cupboards, strengthening damaged ceilings, wood work, painting, polishing, new sanitary fittings fixtures along with other allied works at jk house 5 p.r road

Carpentary Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

State Government

State Government

State Government