Latest carpentry works Tenders | Government carpentry works Tenders

Central Government And Public Sector

CTN :38600007

28 Dec, 2024 26.36 Lacs

Bhadradri Kothagudem - Telangana

Tender For miscellaneous carpentry works at hwpm colony for the year 2024-2025.

CTN :38556439

02 Jan, 2025 NA

Daman - Gujarat

Tender For supply of furniture - rack adjustable 6 tier steel , bath stool pvc , chair easy , chair writing , peg table , receptacle pvc , sofa chair with cushion one seat , table bed side , table center , table writing , table dressing gents , almirah medium with shelves , almirah steel large with shelves , book case open small , chair dining with long back , chair easy cushioned , chair verandiah , chair writing steen , hat stand with mirror , hot case small , magazine rack medium , notice board , safe meat and milk small , side board small 1200x455x760mm , sofa set 5 seater with cusion , stool dressing cushioned , table dining 8 person 6 ft x4 ft , table cook house , table dressing ladies , table pantry medium , table office clk steel , teapoy 600x450x540mm , teapoy varandha , table card 900x900x600mm , chair cba spl with hand rest , table center two tier , form with back , receptacle small , table stainless steel top 1670x760x750mm , stool revolving adjustable , stool 2 feet hight , bed steel iron hospital , locker steel 4 unit , chair cb steel , bed hard 1980x900x660mm , rack steel adjustable , charpoy gi with plywood top , table writing medium , teapoy wooden , table 3x2 inch with drawer , chair plastic mouled with arms and with cusuhned ornate , table 3x2 without drawer 900x600x760mm , receptacle large with bucket , table dining 6 person , safe milk , hot case large , foam with back , receptacle , chair dining , table cook house terrazzo top , chair writing 950mm high 500mm wide , table 2x2 with drawer , rack steel 1830x760x1905 mm bid number/ ( ( ) ): gem/2024/b/5658031 dated/* : 12-12-2024 bid document/ 1 1 / 49

CTN :38518749

30 Dec, 2024 NA

Delhi - Delhi

Tender For supply of annual rate contract for repair and maintenance of steel and wooden furniture - change of channel of wooden computer table , change of kb tray and channel of wooden computer table , change of cloth of revolving chair high and low back including material and labour cost. , change of foam and cloth of revolving chair high or low back including material and labour cost. , change of leatherite of executive chair including upholstery , cutting and machine grinding of wooden table top glass , fitment of screws or bolts of chairs for repair. , fixing of wall clock wall maps boards hat stand etc using suitable apegs and nails or screws , full repair of chair including adjustment of height spring tilt threading of wheel hole revolving chair high or low back , making of hole on table for channeling of cables , opening of lock of steel furniture including steel almirah filing cabinets table and map chests etc , repair wooden hat stand or honour board , refurnishing or change of cloth and replacing foam 4 inch thickness 30 density including labour and material of wooden of single seater sofa , refurnishing or change of cloth and replacing foam 4 inch thickness 30 density including labour and material of wooden of two seater sofa , refurnishing or change of cloth and replacing foam 4inch thickness 30 density including labour and material of wooden of three seater sofa , refurnishing or change of cloth and replacing foam 4inch thickness 30 density including labour and material of wooden of single seater sofa with special cloth , refurnishing or change of cloth and replacing foam 4 inch thicknessm 30 density including labour and material of wooden of two seater sofa with special cloth , refurnishing or change of cloth and replacing foam 4 inch thickness 30 density including labour and material of wooden of three seater sofa with special cloth , repair of steel almirah filling cabinates tables and map chests including wlding as required removal of bends and dents and fitment of screws bolts as required of steel furniture , repair and adjustment of drawer or sleeves of steel almirah and table drawer , replacement of wheel of revolving chair high or low back , replacement of base with wheel of revolving chair high or low back , replacement of pvc arms of revolving chair high or low back , replacement of base plate of revolving chair high or low back , replacement of hydraulic system of revolving chair high or low back , supply and fixing of brass hooks for hat stand , supply and fixing of glass shelf for wooden book shelves almirah and wall , supply and fixing of 12 inch x 12 inch mirror for wooden hat stand , supply and fixing of locks for steel almirah , supply and fixing of locks for filing cabinet , supply and fixing of locks for steel tables drawer , supply and fixing of handles of steel almirah , shifting of tv , supply and fixing of set up box stand

State Government

CTN :38573291

18 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For maintenance of ladies toilets and gents toilets blocks and upkeeping the roads and surroundings of the pwdcampus engagement of labours for maintaining watersupply,sanitaryarrangements carpentry worksofthepwdcampusatchepauk chennai5.period12/24to03/25

Central Government/Public Sector

CTN :38567882

19 Dec, 2024 NA

Kota - Rajasthan

Tender For procurement of folding table of size 1200mm x 600 mm with height of 750mm (+/- 10 -12m m), with weight bearing capacity of 80 kg , table top made up of 5 mm pvc plastic/ ldpe plastic, support a nd leg frame should be made up of 16 gauge 25mm od tubular steel frame, locking mechanism should be with sheet metal, the bottom ends of chair legs to be provided with caps made of rubber or other resilient material which will not mark the floor and is resistant to sliding . powder coated paint sample shall be appr oved before supply, light weight folding rectangular table 1200 mm x600 mm x 750 mm . brand: smi , s upreme furniture or similar brand. [ warranty period: 12 months after the date of delivery ]

CTN :38555941

02 Jan, 2025 NA

Thane - Maharashtra

Tender For tender for supply of furniture work, executive table size -1800wx900dx740h, eru -1550wx450dx704h, executive table size - 1500wx750dx740h, eru - 1050wx450dx704h, executive high back chair (leatherette), executive visitor chair (leatherette), officer high back chair (mesh), officer visitor back chair (mesh), pentagonal worksurface 1500w1x1500w2x600d providing 25mm thick prelaminated pentagonal worktop with pvc lipping, staff mid back chair (mesh), nova free standing with flat metal front of size -390wx440dx646ht, 1dr = 1 box + 1 file, central locking., kbpt, cpu trolley, footrest, storages unit with wooden top 1192.5hx900wx450d, wooden partition

CTN :38546615

21 Dec, 2024 59.56 Lacs

Trivandrum - Kerala

Tender For maintenance, rectification of 1. wooden joineries and other carpentry works 2. masonry/ repair works 3. welding/ fabrication works and 4. operation of water treatment plants, sewage treatment plants and maintenance of distribution network in all areas of lpsc valiamala

Central Government/Public Sector

CTN :38478441

01 Jan, 2025 59.00 Lacs

Gandhidham - Gujarat

Tender For provn of furniture for md accn for 08 offrs, 09 jcos and 16 ors at gandhidham mil stn - sch a part-i (wooden furniture), bath mat pvc (fd/e6/map/07) dimension :the size of the bath mat shall be 400mm l x 300mm w x 250mm h.description: the bath mat pvc shall be made up of 5mm thick ppcp material .the bath mat shall have centre leg of dia 25mm.the four legs shall be in arc shape and of size 10mmx100mm.the top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. the weight of the bath mat shall not be less than 1.3 kgs., bin linen multipurpose (fd/e6/map/09)the overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. the sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. the back of the bin linen shall be of 12mm thick commercial plywood. the three equal shutters shall be provided with magnetic catchers. all fittings and fixtures shall be done as per drg.the base shall be provided at an height of 75mm from ground and shall be of first class hard wood with four nos of 25x25mm stiffeners placed at equidistant positions. rest all as per drg.all parts where polish require shall be done with glossy finish., chair dining offrs (fd/map-ii/04)all wood must be first class teak wood.overall size shall be 950mm high,450mm wide and 450mm deep.the size of the legs shall be 35x50mm .front and side rails shall be of size 25x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.four teak wood vertical stiffeners of section 20x25mm shall be fixed in back of chair. side frame should be 35x50mm.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.the curved teak wood back shall be of section 25x45mm.all sizes shall be taken as stated in drg. all wood surfaces shall be lacquer polished with high gloss finish of walnut shade.rest all as per drg., chair easy (fd-229)dimension: overall size shall be 510 mm long, 575mm wide and 740mm high .description:- all wood shall be first class teak . front legs shall be 25mmx55mm in section and 355mm high up to seat level. rear legs shall be of 25mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. front, back and side rails of seat shall be out of 25mmx50mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear teak wood arm rests shall be provided at 190mm above seat level and shall be size as shown on drawing.caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. caning shall be done in godrej pattern. pvc shoes 25mmx25mm shall be provided at the bottom of all legs.finish:- all wood surfaces exposed to view when placed in position shall be given high gloss french polish with lacquer finish., chair dining (fd/map-ii/05)dimension:overall size shall be 890mm high, 440mm wide and 430mm deep.description:the size of the legs shall be 30x55mm.front and side rails shall be of size 30x65mm.stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg. pvc seat 4mm thick of ppcp material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws.one additional stiffener of size 30x25mm shall also be fixed below the seat for extra suuport of pvc seat.the height of the seat shall be at 460mm high from ground.the size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.f

Central Government/Public Sector

CTN :38526775

31 Dec, 2024 3.60 Lacs

Bangalore - Karnataka

Tender For provn of furniture for defence services for construction of perimeter security wall and associated security infrastructure at hebbal under ge (north) bangalore - part- i (wooden furniture), rack rifle 6 rifles (cwe/td/243), rack rifle 4 rifles (cwe/td/243), part- ii (steel furnitures), chair cb steel with arms (drg no fd-75(m), charpoy ip with hardtop (fd/map-ii/01), foam with back 1900mm (drg no. fd-78(m), receptacle pvc (fd/e6/map/13), table 900 x 600 mm steel without drawer (fd-1007)

CTN :38526256

19 Dec, 2024 1.00 Crore

Chohtan - Rajasthan

Tender For procurement of services and material in gram panchayat mate ka tala panchayat samiti chohtan - padla/kankar/jhajhra , mortar-soil/mud masala , lime from kali kiln for masonry work , cement , p.p.c. , white cement , fine aggregate , sand/gravel , gravel local , fly ash , surkhi." , stone dust (stone dust, in masonry work) , gitti of stone/brick (for other than road work) , 40mm measured stone (grit broken by hand) (voids cut 1/11) , 40mm stone (broken by crusher) (voids cut 1/11) , 20mm stone (broken by crusher) , 12/10/6mm stone (brick broken by crusher) , material for road work (5 km. including lead) , 63-40mm stone broken by crusher (voids cut 1/11) , 63-40mm stone broken by hand (voids cut 1/11) , 90-45mm. hand broken stone rod (voids cart 1/11) , quarry ravish voids cut 1/6) , yewal (voids cut 1/6) , concrete voids cart 1/6) , binding material (pi 4-6) (voids cart 1/6) , brick (22.5 x 11 x 7.50 cm) , 1 st class , 2nd class , soling / kharanja / masonry stone , masonry veradda (rr) , masonry radda (cr) , kharanja soling (for flooring work upto 15cm height) , kharanja soling (for road / kharanja work upto 23cm height) , jodhpuri type stone strip / arch / splint pieces (length 2-3', width 10-12", thickness 2.5-3.5%):: , flaky material(3-4" thick & length and width 1- 2") , sandstone (dpc, siii, coping, intel, tand, almirha etc) , upto 25mm thickness , upto 25-40mm thickness , upto 40-50mm thickness , upto 50-75mm thickness , upto 75-100mm thickness , upto 100-150mm thickness , firth / patti pattan katla stone , firm wa mavatse upto 35mm thick, min, 3 sqft of more res paha patan maliyala 80-76mm gattad, min. 1 sqli or mom , dimension polish , 000 sq.m. raja , 001 to 2300 marma patient sa , more than 2300 sarg patient , polish photo stroma site polish) , 900 sq.m. or , 901 to 2300 sq.m. tama , more than 2300 sq.m. , bharathan stone (gakrana adga 20mm gota) rama from 901 to 2300 class , ddo class segee lac , more than 2300 class segee , marble pippa , marble powder , marble stone (rajnagar ii quality/ local 20mm thick) , segee from 901 to 2300 class segee , more than 900 class segee , stone ghokhat , single paitham size 100 x 75 mm. , dowel paitham size 125 x 75 mm. , stone slab , up to 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 m length, minimum 75mm thick , precast tiles/blocks , glazed size-30x45 cm , mosaic size-40mm thick , vitrified size-60x60 cm , interlock tiles/brick/block for road work , cement interlocking block m-30grade, 60mm thick , cement interlocking block m-30grade, bomm thick , cement interlocking block m-30grade, 100mm thick , karavasite vapor ducter single core cable 151 , marked , 1.50 sq mm. , 2.50 sq mm , 0.50 sq.mm. , , 1.00 sq.mm. , , 4.00 sq.mm. , , 8.00 sq.mm. , , local sakdi with fittings (for doors, windows and furniture) , , mango , , doors made in patwadi (30 mm groves) , thora four prayas, palle) , iron (tor star 415/500 for niparsgate , winding wire 18 gauge , iron girders , conia iron/chokor sariya/patti/pangal iron , cartted iron wire (size 12 gauge wire and 12 gauge strad/ gauge wire and 14 gauge strad/14 gauge , jaati , iron mesh (24 gauge, 14 mesh) , cement concrete mesh akash patal 40 mm thick , glass , 3 mm thick glass , paint , enamel paint , distemper (water bound) , for painting (aras/kaati) , primer (for iron/wood) , petroleum products , diesel hsd , movil oil , bitman shalitax board (25 mm thick) , plain sheet (plain sheet) , gi sheet 22 gauge (0.80 mm). , gi sheet 24 gauge (0.63 mm) , m.s. sheet 22 gauge (0.80 mm) , s.s. sheet 24 gauge (0.63 mm) , gardener , g.i. sheet 1 mm thick , g.i. sheet 22 gauge (0.80 m.m.). , asbestos cement sheet 6mm [2.5/2.75x1m) , other , pvc sheet 1'mm thick (coloured/plain) , 2. literof expo sheet green yellow colour (183x90) , 1 , pipe , gi 15 mm dia (class) , 2. gi 20 mm dia (b class) , 3 , 4 , 6 , 7 , gi 25 mm dia (b class) , ac 75 mm dia , ac 100 mm dia , pv

Carpentry Works Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector