Latest carrier plate Tenders | Government carrier plate Tenders

CTN :43915949

24 Feb, 2026 NA

Doda - Jammu And Kashmir

Tender For corrigendum : supply of armature assy 24v , field coil 24v , bush carrier plate , insulation tape , water seperator , head gasket , break adjuster

CTN :44143195

13 Mar, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of (1) stiffener plate of front carrier plate for aar-h type cbc with bdg to rdso drg. no. rdso/cg/drg/24034 alt.2 (consisting of 5 items) for make m/s sanrok, m/s sona comstar, and m/s wabtec. note:- 1.) stiffener plate material & specification shall be as per is:3885 part-2, grade-5 with hardness: 190 to 245 bhn with annealed condition. 2.) unspecified tolerance as per is:2102 (medium) 3.) surface treatment: black e.d coating/black paint after primer 4.) stiffener plates shall have holes with pitch (p) =100+-0.5mm and distance from edge (a) = 25+-1mm. 5.) fasteners of reputed make: unbrako, lps, caparo, tvs. 6.) for traceability firm initial size should be 5-15 mm. 7) no sharp edges and burrs.(2) stiffener plate of front carrier plate for aar-h type cbc with bdg to rdso drg. no. rdso/cg/drg/24034 alt.2 (consisting of 5 items) for make m/s frontier, m/s jupiter, and m/s nwfp. note:- 1.) stiffener plate material & specification shall be as per is:3885 part-2, grade-5 with hardness: 190 to 245 bhn with annealed condition. 2.) unspecified tolerance as per is:2102 (medium) 3.) surface treatment: black e.d coating/black paint after primer 4.) stiffener plates shall have holes with pitch (p) = 90+-0.5mm and distance from edge (a) = 30+-1mm. 5.) fasteners of reputed make: unbrako, lps, caparo, tvs. 6.) for traceability firm initial size should be 5-15 mm. 7) no sharp edges and burrs.

Central Government/Public Sector

CTN :44143276

23 Mar, 2026 NA

Danapur - Bihar

Tender For supply of stiffener plate along with fasteners for front carrier plate of cbc as per rdso drawing no. rdso/cg/drg/24034, alt. 2. item nos. 1 to 5. note:- 1. stiffener plates shall be as per is:3885 part-2, grade-5 in annealed condition with hardness between 190-245 bhn. 2. 50% of stiffener plates shall have holes with pitch=100+-0.5mm and distance from edge = 25+-1mm, while remaining 50% stiffener plates shall have holes with pitch=90+-0.5mm and distance from edge=30+-01mm. 3. hex head bolt shall be of reputed make: unbrako, tvs, tuff, caparo, sterling, except lps. make-any.

Central Government / Public Sector

CTN :44151551

02 Mar, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot ferrous scrap - m.s.assorted scrap -98050047(15) cond.&u/s m s assorted scrap consisting of draw hook beams, secondary minor pads, brake shoes, curved pull rod, swing link pins, upper primary centering disc,lower /upper centring disc,axle boxcover, anti roll bar traction lever secondary centering disc z link axle guides, draft keys, brake gear pins, ms dash pots, protective tubes, roller bearings ms, outer rings, moulds,eq.stays, support device r/f carrier plates, silent bush supporting device f/r plate, hanger blocks, bss pins, lower spring seats, brake heads, diff. types of brake hangers and levers, d v components, ms collars,long bolts, dm rings, retaining rings, c.b.c components, base plate,supporting device, c.p.b bracket with control reservoir,m 16 bolts and cotters ,split pins, wearing plates, m s pipes, safety strap, bracket for bogie bolster, centre pivots, brake beam support brackets, safety wire rope pieces, rod pieces, bmbc barrels, and connecting rods,m s cartridges, cr rings, brake, lhb bearing components, collars, bolt & nuts,control reservoir & common pipe bracket components,backlash compensation device with elastomer pads, anti roll bars, brake controllers,oil pumps & filters,ms avm pads, shoe keys etc., with or without attachments of rubber, fiber, nylon bushes and other similar carriage and memu items . hsn code: 72044900 gst@18% on forward charge basis. note:1) delivery on actual weighment basis only. 2)if any ss/non-ferrous items found during loading /delivery shall be returned to the railways by the purchaser.3) segregation not permitted. location :ferrous yard bin no :- w-15.

CTN :44109307

02 Mar, 2026 NA

Ahmedabad - Gujarat

Tender For supply of injector control valve , shock absorber assy front , shock absorber assy rear , brush carrier plate , water container , water pump , belt tensioner , switch assy , sprocket comp , arm assy kick

CTN :44090825

28 Feb, 2026 NA

Ahmedabad - Gujarat

Tender For supply of head light assy , brake pad , ac filter , oil filter , switch assy , bearing , clutch disc , field coil , brush carrier plate , regulator assy , ac gas r134a , arnass control pump , speedometer assy , master cylinder power unit

Central Government/Public Sector

CTN :44123434

11 Mar, 2026 NA

Samastipur - Bihar

Tender For supply of 1 stiffener plate of front carrier plate for aar-h-type cbc with bdg of lhb coaches as per rdso drawing no. rdso/cg/drg/24034, alt.- 2, item no:- 1, 2, 3, 4 & 5 (a) for m/s sanrok, m/s sona comston and m/s wbbtec = 1no/set (b) for m/s frontier m/s jupiter an m/s nwfp or similar

Central Government/Public Sector

CTN :44113467

27 Feb, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - melting 98050114 %u2013 m.s. melting scrap: m.s. melting scrap released from assorted unserviceable rolling stock, track fittings, machinery, coach and locomotive components including pivot pin cover, pick axle, crow bar claw, released p-way key, two way key, dog spike, rail clips, rail tensor, rail trolley, rail tong, fish plates, joggle plates, heavy perforated m.s. plates, m.s. plates, iron plates, steel pattis, rail trolly wheel,channel sleeper fittings, damaged channel sleeper bridge pieces, t-head bolts for channel, bolts, screws, nut bolts of mixed sizes, washers, clamps, securing bolts, cotter pins, loose jaw cotter pin, knuckle pins, supporting device, cbc supporting device, draft gear for cbc, draft gear, draft key, draft yoke, draw hook, enhanced capacity draw hook, draw bar, draw hook beam, bent coupling link, coupling rods, shaku coupler, buffer spindle, spring loaded buffer assemblies, buffer and draw gear, centre pivot foundation box, centre housing, bolster bogie base plate, bogie bolster, bogie bolster hanger, hanger block, bolster spring suspension pins, laminated springs, support springs, broken springs, leaf springs, lb spring, primary and lateral bump stops with or without rubber, emu rubber attached sandwich assemblies, brake rigging links, brake rigging icf, brake rigging levers and levels, brake cylinder assemblies, bmbc brake cylinder, bmbc body, adjusting tube bmbc, brake head, spring brake chamber, brake pads with or without rubber, brake contact assembly, traction links, traction lever, traction motor pinion parts, traction motor bearing cover, bearing shield of traction motor, end shield of traction motor, traction motor gear case assemblies, gears, small gear pieces, gear box, bearing cartridges, dismantled bearing spares with collars, phonic wheels, ctrb, equalising stay, anchor link, diagonal rod, gc bar, point gc, irs point machine slide complete set, point electric detector, junction box for point machine, signal machine parts, tws locking slide with block, e-block, base plate, face plate, face plate for buffer plunger, important elbow, channel, guide t section, parallel guide bar, sej bracket, z-bracket, heavy brackets, stiffener plate brackets, support brackets, reinforcement structure pieces, mechanical linkages, mechanical locking assemblies, supporting device body, cutter chain machine parts, pqrs machine parts, ttm machine parts including hydraulic cylinders, hydraulic jack, mechanical jack 12t/18t/25t, bottle jack, submersible piston rod, torque wrench, spanners, spanner rod, spanner plate, lifting roller, crane chain and hook, loco chain, angle hook, hook bolt, wire rope with or without aluminium crimping, wire rope sling/tow, lp-hp pantograph cylinder, lp-hp cylinder of knorr bremse compressor, lp-hp valve for knorr, westinghouse rdk valve, westinghouse combined brake unit, condenser washer, dirt collector, nrv, dv, diesel generator set parts, metco traverser parts, bcm cotter chain, poh items of bg coaches, motor coach front and rear covers, motor coach collar, icf collar, axle box front cover, centre pivot components, cattle guard, machine base, platform cabin parts, mixed engine material, mixed size bolts, double geared items, hot air gun, released plate screw, cr with common pipe bracket, melting items and other miscellaneous railway m.s. scrap, worn threaded parts, bent or corroded track fittings, damaged traction gear parts and other assorted ferrous scrap; material may contain some attached aluminium and other small non-ferrous parts, grease, oil, dirt and rust.all materials unserviceable and beyond economical repair (ber), not fit for railway use, sold on %u201cas is where is%u201d basis. loading by purchaser. custodian: dms/scrap/pardi.

Central Government / Public Sector

CTN :44092169

25 Feb, 2026 NA

Guntakal - Andhra Pradesh

Tender For auction sale of rolling stock - 13413- loco-01no- delivery on number basis. lot no. 5321 25 01 41 gtl gtl s.loco aps. available with sse dsl gtlserviceable alco diesel locomotive no.: 13413 / wdg3a. the age of said locomotive is completed 16 years 00 months as on 01.09.2024, last poh on 17.01.2016 .weight of the loco is 118.839 mts approximately. loco was in working condition and intact when stabled. alco loco no. 13413 / wdg3a will be sold in intact condition. earned kilo meters since 2018: 3,54,220 kms., alco loco no. 13413 / wdg3a /gtl stabled on 03.10.2024, schedule particulars: date of commissioning: 23.08.2008, last poh: 17.01.2016, yearly: 18.03.2020, qly: 17.02.2022, m2:22.04.2024, t2:14.06.2024. complete loco will be sold on ¿as is where basis is¿. the weight of the serviceable loco is without supplies and including battery lead weight. hsd oil 1500 lts is present in the loco at the time of lot inspection. ds-8 nos:-053211087 dated: 07.01.2025. (total quantity- 118.839 mts ( approx) available on the rail of diesel loco shed, guntakal. (as is where is basis). hsn code: 86021000/gst 18%. for photos of this lot, kindly click on view lot image on bottom left side. special conditions:01 the gst applicable is @18 % extra. 02 cost of fuel, lube oils and water and any other miscellaneous works etc. will be borne by the purchaser, post-sale directly from the shed in-charge. only after these charges are paid by the purchaser, the delivery of the loco(s) will be handed over to them.03 payment of haulage charges as per prevailing railway board rates as indicated in circular no.5 of 2023 dated 29.03.2023 or as modified from time to time, will be borne by the purchaser. for enabling smooth disposal of the loco(s) post-sales, the written tariff applicable on this account is to be got by the purchaser from the traffic department i.e. from the concerned area manager¿s office or sr.dom of the concerned division, wherever the locos are stabled for sale and delivery, before actual delivery by the nominated concerned in-charge of the shed.04 engine haulage charges for the movement of engines on private account is applicable in consultation with the operating department or as advised by sr.dom of the concerned division where loco(s) are stabled and siding charges, if any are to be paid by the purchaser in addition to the purchase cost of the locomotive.05 any other incidental charges arising thereof (if any) at the time of taking delivery of the loco(s) will be borne by purchaser.06 the cost of the sale of the loco(s) are exclusive of any scheduled work such as m4 or m6, which is required to be done by the purchaser after taking delivery of the diesel locos and/or in consultation with the mechanical department of the shed etc. after due payment for these works as applicable thereon.07 the diesel loco(s) will be sold in intact condition on ¿as is where is basis¿.08 the date of commissioning/year of built, last poh done/ekm since last poh in kms, schedule particulars: m24 done on (dt), m36(hly) done on (date) is clearly indicated in the lot description.09 prospective purchasers are requested to carry out the visual inspection of locos before bidding with intimation to the concerned sr. dme of the dsl loco shed of the division in which the loco(s) are stabled. post auction no representation will be allowed.

CTN :44092008

27 Feb, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap various type of ms/ci machinery parts and fittings including tampering tools, motor valves, cylinders, dg set/desel pump set engine without altenator, hospital eqipment,track machine parts, cutting tools, long blocks, bearing covers, drum pulleys, pinion, gears,safety guards, liners, pistons, brake cylinders, engines, fuel pressure sensors, crankshafts, pinion, alternater assembly shafts,empty alternater body without coil , conveyor chains, engine block units, kit liners, power car long blocks, liner pistons, axles, jib brackets, and more. these parts are available in various sizes and may also include other similar known or unknown machine spare parts. these items are not fit for railway use. remark; some new disel loco items received from smm/dsl/gd included in this lot but the same were delclared scrap by their comptient authority. location: - south side of dy cmm buliding near bargad tree . lbpl, dbaw, gst-18%, tcs -1% , hsn code-72045000, allocation-20714208

Carrier Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector