Latest cartridge sale Tenders | Government cartridge sale Tenders

Central Government And Public Sector

CTN :45066381

07 May, 2026 NA

Bangalore - Karnataka

Tender For reinforced conveyor rubber belt 10 inch width x 60 feet long x 13 to 15 mm thick for shot blasting machine cmc & pmc -1 bucket elevator. is-1981, 6 plies. note: warranty: 12months from the date of fitment or 18 months from the date of supply, which ever is earlier. [ warranty period: 18 months after the date of delivery ]

Central Government/Public Sector

CTN :45031724

05 May, 2026 NA

Sultanpur - Uttar Pradesh

Tender For supply of spares parts of shot blasting machine

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

Central Government/Public Sector

CTN :45024877

19 May, 2026 NA

Jaduguda - Jharkhand

Tender For supply of printing items 101091 d d - underground man allocation ucil-dqm-mine jad-mining-p- 02-1 one side print on each leaf only and one book consists 100 pages, paper size- 21 cm x 29 cm , mining mates report of daily examination of underground mines both side print and one book consists 400 pages, paper size- 27 cm x 22 cm , asstt. managers diary under m m r no. 44 and 45 of 1961 both side print and one book consists 100 pages, paper size- 15 cm x 21 cm , form - u see rule 29 r and 29 s one side print in triplicate and one book consists 50 sets, paper size- 30 cm x 22 cm in white, blue and red order , weekly report on the condition of the shaft inclines or other outlet for ingress and egress both side print and one book consists 100 pages, paper size 27 cm x 22 cm , form re- 6 pad of 100 pages, paper size-28 cm x 22 cm one side printed as per our sample , form z duplicate pad of 100 pages, paper size-14 cm x 21 cm one side printed as per our sample , form re- 5 pad of 100 pages, paper size-33 cm x 42 cm both side printed as per our sample , daily issue and return register both side print and one book consists 50 pages paper size-25 cm x 36 cm as per our sample and each book well binded with good quality cardboard , explosive stock register both side print and one book consists 100 pages, paper size-32 cm x 40 cm as per our sample and each book well binded with good quality cardboard , level wise blasting report register both side print and one book consists 100 pages, paper size-33 cm x 21 cm as per our sample and each book well binded with good quality cardboard , vt pass for hpu and fire section duplicate pad of 50 pages, paper size-14 cm x 21 cm one side printed as per our sample , notice of attend vtc mines book of 100 pages, paper size-14 cm x 21 cm one side printed as per our sample ) /bid number : gem/2026/b/7456788 * /dated: 28-04-2026 & & / bid document 1 / 16

Central Government/Public Sector

CTN :45039404

15 May, 2026 1.90 Crore

Angul - Odisha

Tender For comprehensive, cleaning and up-keeping of service building like time office ,field canteen ,rest shelter ,conference hall, wash room, dg room, workshop complex, safety office, blasting office control room, project office and operation of mines cante

CTN :45047854

22 May, 2026 NA

Kanchrapara - West Bengal

Tender For at kpaw- provision for construction of shed beside shop 6 for bogie shot blasting plant at loco complex.

CTN :45011088

18 May, 2026 NA

Bharatpur - Rajasthan

Tender For supply of cu slag blasting sa 2.5 preparation , primer inorganic zinc silicate 65 micron x 1coat , manual or power tool st2 or st3 surface preparation , primer surface tolerant epoxy 2component 75 micron x1 coat , midcoat h.b.glassflake epoxy 200 micron x 1coat for roof , midcoat polyamide epoxy mio 100 micron x 1coat , finish 2 pack pu finish 50 micron x 2coats

CTN :44802649

12 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : providing of custom bid for services - lumpsum job scope for cdu - 1.a. blinding and deblinding - rate per , 1.b. blinding and de-blinding with using , 1.c. blinding and de-blinding with using , 1.d. gasket repacement , 1.e. gasket repacement using non sparkin , 1.f. gasket repacement using torque wren , 1.g. bolt servicing upto 12" dia flanges , 1.h. bolt servicing above 12" dia flange , 1.i. bolt servicing from 24" dia flanges , 1.j. bolt servicing upto 12" dia flanges , 1.k. bolt servicing above 12" dia flange , 1.l. bolt servicing from 24" dia flanges , 1.m. bolt servicing upto 12" dia flanges , 1.n. bolt servicing above 12" dia flange , 1.o. bolt servicing from 24" dia flanges , 1.p arresting flange leaks , 1.q. arresting flange leaks using non sp , 1.r. arresting flange leaks using torque , 1.s. opening of flange using flange spre , 1.t blind fabrication , 1.u. plate flange fabrication , 1.v. cold cutting of pipelines , 1.w. providing air / steam hose connecti , 1.x. splitting of nuts using nut splitte , 1.y. bolts cutting with hacksaw/grinding , 2.a. piping - cs fillet joint per inch d , 2.b. piping - cs fillet joint per inch d , 2.c. piping - cs fillet joint per inch d , 2.d. piping - as/ss fillet joint (smaw) , 2.e. piping - as/ss fillet joint (tig) , 2.f. piping - fillet joint monel/inconel , 2.g. piping - fillet joint monel/inconel , 2.h. piping - cs butt joint non x ray qu , 2.i. piping - cs butt joint x ray qualit , 2.j. piping - cs butt joint x ray qualit , 2.k. piping - cs butt joint x ray qualit , 2.l. piping - as/ss butt joint (tig root , 2.m. piping - as/ss butt joint (tig) , 2.n. piping - butt joint monel/inconel ( , 2.o. piping - butt joint monel/inconel ( , 2.p. piping - cs corrosion pad per inch , 2.q piping - cs corrosion pad with shoe , 2.r. piping - as/ss corrosion pad per in , 2.s. piping - as/ss corrosion pad with s , 2.t. wrap coating using "pykote" of 4 mm , 2.u. nozzle replacement/provision, rate , 2.v. cs gusset fabrication n welding per , 2.w. as/ss gusset fabrication n welding , 2.x. piping - cs rf pad per inch dia usi , 2.y. piping - as/ss rf pad per inch dia , 2.z. non-pressurized piping welding join , 2.aa. grit blasting , 2.bb. primer painting - inorganic zinc s , 2.cc. painting - for insulated pipe havi , 2.dd. painting - for insulated pipe havi , 2.ee. manual cleaning of pipelines , 2.ff. erection / dismantling of piping / , 2.gg. hot work area preparation in runni , 2.hh. hot work area preparation in runni , 2.ii. hot work area preparation in runni , 2.jj. hot work area preparation in runni , 2.kk. power tool cleaning on surfaces , 3.a. dye penetrant test , rate per inch , 3.b. dye penetrant test , rate per runni , 3.c. dye penetrant test , rate per sq me , 3.d. wfmpt, rate per inch dia of wfmpt d , 4.a. radiography on piping with iridium , 4.b. radiography on piping or any other , 4.d. radiography on piping with selenium , 4.e. radiography on piping or any other , 4.g. mobilization charges for digital ra , 4.h. radiography film devolopment with d , 4.i. profile radiogrpahy of surface - mo , 4.j. profile radiogrpahy of surface - re , 4.k. profile radiogrpahy of surface - ch , 4.l. profile radiogrpahy of surface - re , 4.m. profile radiogrpahy of surface - ch , 5.a. stress relieving done using electri , 5.b. stress relieving done using electri , 5.c. stress relieving done using electri , 6. ultrasonic flaw detection test. rate , 7.a. overlay patch work (rate per sq.foo , 7.b. overlay patch work (rate per sq.foo , 8.a. inlay patch work - cs inlay patch p , 8.b. inlay patch work - ss inlay patch p , 9. replacement of casing plates 8 mm thk , 10.a. weld build up cs – upto 1000 sq in , 10.b. weld build up cs – from 1001 sq in , 10.c. weld build up cs – from 3001 sq in , 10.d. weld build up cs – from 5001 sq in , 10.e. weld build up cs – above 10000 sq , 10.f. weld build up as / ss (all varieti , 10.g. weld build up as / ss (all varieti , 10.h. weld build up as / ss (

State Government

CTN :45027540

18 May, 2026 NA

Delhi - Delhi

Tender For surface preparation using sand blasting supply and application of epoxy painting on hot distribution cw return pipes and cw discharge pipes at gtps (as per tender)