Latest cast iron Tenders | Government cast iron Tenders

Central Government / Public Sector

CTN :41074510

25 Jul, 2025 NA

Panipat - Haryana

Tender For supply of ncm2513033 ganesh sales make storm water pump spares : : - set of impeller p n 302 gpd 80 260 , shaft sleeve p n 423 gpd 80 260 , shaft with key p n 405 451 gpd 80 260 , deflector flinger p n 458 gpd80 260 , casing wear ring p n 171 gpd 80 260 , impeller wear ring p n 332 gpd 80 260 , casing u n 1010101 , stuffing box u n 2170101 , bearing housing u n 5010101 , bearing cover de u n 5410101 , bare pump assembly , bearing cover nde u n 5430101

State Government

CTN :40565555

29 Jul, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of low pressure valve for unit no. 1 to 8 at wanakbori tps. - rubber lined diaphragm valve size 100 mm (4), novel make, metal: cast iron., rubber lined diaphragm valve size 150 mm (6), novel make, metal: cast iron., neoprene 100 percent pure rubber diaphragm 100 mm, gate valve 150,size 25 mm (1"), complete valve assembly for 40 nb gate valve, gate valve 150 size:50 mm ( 2" ), ccs gate valve class-150 65 nb, cs gate valve 80 nb, cs gate valve 100 mm dia, cs gate valve size 150 mm (6") nb, 150 flanged type, cs gate valve class-150,200 nb (8"), c.i. gate valve 250 mm dia, gate valve size 300 mm nb (12") 7.5 kg/cm2, gate valve class-150,350 mm nb, ci globe valve size 100 nb (4") 150 flang e to flange 292 mm pcd 191, c.i.ball valve size 1" bsp, class 150, internal thread at both end, 50 nb ball valve, gun metal gate valve size 15 mm (1/2"), is-778, class-i, screwed female end., gun metal gate valve size 20 mm (3/4"), is-778, class-i, screwed female end., gun metal gate valve size 25 mm (1"), is-778, class-i, screwed female end., g.m.globe valve size 32 nb, gun metal wheel valve-40mm, gun metal valve 2", gun metal globe valve nb 50, is -778, 450 mm butterfly valve, cs nrv check valve 80nb, ccs swing check non return valve 150,100 nb (nrv), ccs swing check non return valve 150,200 nb (nrv), cs globe valve class-150,200 nb (8"), ss-316, astm a 351 gr. cf8m, ball valve, size: 40mm, 3 piece design, full bore, renewable teflon seat & seal, fitted with ss316 internal working parts, flanged ends, asa- 150 class., ball valve size 1.1/4", ss-316, astm a 351 gr. cf8m, ball valve, size: 25mm, 3 piece design, full bore, renewable teflon seat & seal, fitted with ss316 internal working parts, flanged ends, asa- 150 class., s.s.316 ball valves, size: 15 nb, pressure withstand : 60 kg/cm2, both end threaded., nrv flap 125 nb for dm plant unit-8, ci check valve size 65 mm (nrv), non return valve size 50 mm, globe valve nb20, globe valve 1500,1/2" nb, gate valve size 1 1/4", globe valve 80 mm, cs gate valve class 150,size:125 mm, swing check valve (nrv), size 65 nb with epdm rubber lining for dm plant., ci ball valve size 1/2" bsp,150, internal thread at both end, g m gate valve 40 mm (1.1/2"), butter fly valve 150 nb, swing check valve (nrv) size-450 mm standard-bs 1868 rating-asa 150 body & bonnet-astm a 216 gr wcb disc-wcb+13 percent cr overely trim-aisi 410 operating pr -5 to 8 kg/cm2, cs non return valve (nrv) ,size 350 nb (14") ,class: 150, ss 50 nb gate valve, c.i.globe valve 150nb, flanged type, flange to flange 355 mm, p.c.d.-245 mm with 8 no of holes

corporations/Associations/Others

CTN :41080735

29 Jul, 2025 13.11 Lacs

Multi City - Karnataka

Tender For supply of safety equipment and uniforms to ugd helpers working in tcc and tools and equipments for ugd vehicles-?? ????? ? ????safety equipment for ugd assistants working in your municipal corporationand uniforms, and u.g.d. branchvijay aggarwalinstrumentssupplying (tools and equipments)sl.no.description of item123supplying of uniform: made with durable fabriclike polycotton, a plain design, including tcc logosupplying of safety helmets: helmets shell should be done shaped, smoothfinish and no metallic components are to be used made with high quality poly carbonate. brim diameter should be 6mm, peak 50mm. helmet should have slots for ventilation. number of holes should be more than 3 but the average area of all holes should not exceed 300mm2.made with high quality poly carbonate it should match the as is 2925:1984 specification standardsupplying of rubber gumboots: a durable, waterproof upper and sole, slip-resistant tread, andpotentially a steel or composite toe cap for impact protection. other important aspects are comfort features like a soft lining and a supportive insole, and compliance with relevant safety standards like is 15298 part-ii.4supplying of safety shoes: safety features such as toe protection, penetration resistance, slip resistance, and electrical properties. these specifications ensure the footwear provides adequate protection against workplace hazards. safety shoes should meets the specifications as per standards like is 15298 (part 2) and en iso 20345,supplying of n-95 mask: an n95 mask, should be adheres to the specifications outlined in is 9473:2002, - filtering half masks. this standard specifies the requirements for filtering half masks, 5 including their design, performance, and testing procedures. n95 masks meeting this standard are designed to filter at least 95% of airborne particles. a minimum 95% filtration efficiency against certain non-oil based particles, and a close facial fit to minimize leakage.unittotal quantityrates amounteach168 2200.00369600.00each84450.0037800.00each 64600.0038400.00each201100.0022000.00each2016 70.00141120.006789supplying of heavy duty rubber hand gloves: heavy-duty rubber gloves are designed for robust protection against chemicals, mechanical risks, and punctures they are commonly made from nitrile or natural rubber and often feature a cotton lining for comfort. it should meets the standard requirements of is 4770:1991supplying of cloth aprons 14-07-2025: (reflective jackets): 100% polyester 3 ply sewing thread of matching colour, h-vis reflective material, durable, breathable, lightweight and machine washable reflective material will be high visibility warning garments with synthetic slide fasteners, micro prismatic type, white or silver colour certified by the manufacturer of retro reflective material. reqired size and colour (yellow and orange) and it should meets the standard requirements of is 15809:2017supplying of heavy duty rain coat: raincoat should be waterproof, comfortable, lightweight, and have a hood. it should also be durable, with sealed seams and good breathability. and it meets the specifications, as per indian standards, are detailed in is 2422 : 2015supplying of cast iron crow bar: made of high-carbon steel can also be used. length: varies depending on application, with common lengths being 24, 30 inches, or 5-6.5 feet for greater leverage. cross-section: often hexagonal, octagonal, or round end shape: one endisusually pointed or beveled, while the other may be flat, clawed, or angled for different prying or demolition tasks weight: varies based on length and material, but generally ranges from 7 to 9 kg. hardness: heat-treated to a minimum hardness value, such as 320 hv, for durability. ndit meets the specifications, asper indian standards, are detailed in is 704: 1984supplying of spade or hoe with handle : made with high corbon steel and flat, sharp-edged 10 blade and a long handle. it's distinct from a shovel, which has a more curved, scoop-lik

State Government

CTN :41089579

19 Jul, 2025 NA

Kangra - Himachal Pradesh

Tender For restoration of rain damages various water supply schemes/flow irrigation schemes under jal shakti sub-division, banuri in tehsil palampur distt. kangra (hp) (sh: providing and supplying of cast iron sluice valve of various dia.

corporations/Associations/Others

CTN :40561036

24 Jul, 2025 21.63 Lacs

Kasimpur - Uttar Pradesh

Tender For corrigendum : procurement of spares of lp turbine shaft sealing and casing assembly for overhauling of unit no 9, dtps, htps, kasimpur

corporations/Associations/Others

CTN :41076543

12 Aug, 2025 4.61 Lacs

Bokaro - Jharkhand

Tender For supply of plain bearing, material- cast iron, grade-250 for esp type: faa-10x 45h-2x90140-2

corporations/Associations/Others

CTN :41092678

01 Aug, 2025 NA

Kolkata - West Bengal

Tender For e-tender for selection of agency for on-site supply of 1 tonne hexagonal cast iron test weights for electronic weighrbidges installed at wbswc managed warehouses/godowns (2nd call)

Central Government And Public Sector

CTN :40976118

23 Jul, 2025 NA

Durg - Chhattisgarh

Tender For corrigendum : supply of cast iron wheel for wheel burrow-is:2341 (q3)

CTN :40703330

18 Jul, 2025 NA

Ernakulam - Kerala

Tender For bid to ras corrigendum : supply of play system lfo mps 18 , play system royal maps 01 , play system leo mps 13b , cast iron bench area 10 sq ft

CTN :41103470

28 Jul, 2025 NA

Patiala - Punjab

Tender For supply of cast iron bench.

Cast Iron Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors