Latest cast steel bogie Tenders | Government cast steel bogie Tenders

Central Government And Public Sector

CTN :40965288

11 Jul, 2025 1.00 Lacs

Jodhpur - Rajasthan

Tender For rt-22 mud pump drive side repairing and spare parts - dismantling and repairing and refitting mud pump, including all gas kits and packing. fitting connecting road lock plate of mud pump. big bush machining, boring, connecting and fitting. small bush machining and bore and fitting in connecting. fit the mud pump gasket pin by making it new. bearing and wheel size by adding main shaft material. machining and grinding with mud pump eccentric wheel pin material bharkar. boring and keying inside center shaft size of mud pump eccentric wheel. remove chain cover drive chain and wiring and repair and refit. sign the bearing oil seal size on the chain drive shaft. 2 pay attention to drive shaft material and sign. make mud pump gland bush gun metal and fit. 3 4 oil seal 60-50-15 big bush gm 1 5 small bush gm.

CTN :40953452

10 Jul, 2025 2.50 Lacs

Baghpat - Uttar Pradesh

Tender For ramala supply of centrifugal spares - plough tension ring od 80xid 50 ( as per sample, air control valve 1/2'' (as per sample), plough cylinder shaft 100x500mm, (as per sample), auto water valve 1'' single channel, teflon bush (hood & center)as per sample, seal kit plough cylinder (as per sample), seal kit hood cylinder (as per sample), seal kit up/down cylinder (as per sample), seal kit cylinder feed valve 300mm(as per sample), rubber square strip 8x8mm, cone clamping lock 80 mm, cone clamping lock 100mm, rubber buffer ( as per sample ), break pad( as per sample ), lock nut km 22, lock washer mb 22, lock nut km 26, lock washer mb 26, wash nozzle (as per sample), wash nozzle pipe (as per sample), scrapper (gun metal) as per sample, plough shaft ( as per drawing ), plough cylinder with lever ( as per cylinder), rubber bush (as per sample ), pin with circlip ( as per sample ), molasses rubber strip for top chamber, housing molasses rubber (as per sample), ss jublee clamps ( as per sample ), rubber buffer damper pad, ss screen holding clamp, ss screen holding clamp, u tyre, brass water wash nozzle ( as per sample ), v seal 100mm, v seal 110mm, v seal 120mm, pully housing uc 1500 (uttam make)

State Government

CTN :40371745

09 Jul, 2025 3.33 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : procurement of spares of 25hp and 10hp pumps for drinking system of stps, sarni - supply of spares for 25 hp pump unifilter plant at stps, ph-3 sarni.make b. e. pumps, model-m1024kk, shaft (s.s) with key,nut and half round key, gland check nut p/e (gun-metal), gland check nut f/e (gun-metal), impeller guide bush (gun-metal), bearing bracket p/e (c.l.), bearing bracket f/e (c.l.), impeller (c.l.), tie bolt & nut (ms) m16 x 360 mm, tie bolt & nut (ms) m16 x 44.5 mm, supply of spares for 25 hp pump unifilter plant at stps, ph-3 sarni.make b. e. pumps, model-m1024kk, shaft with matching nut, impeller c.i., bearing bracket (c.i.), suction cover (c.i.), bearing cover (aluminum alloy), gland cap (c.i.)

State Government

CTN :40951984

08 Jul, 2025 NA

Gondia - Maharashtra

Tender For call for purchasing of all kind of road and building material at hirdamali - building materails, cements isi marks 53 gread (ambuja), cements isi marks 53 gread (utratech), cements isi marks 53 gread (birla gold), cements isi marks 53 gread (acc), stell isi mark (6 mm), stell isi mark (8 mm), stell isi mark (10 mm), stell isi mark (12 mm), stell isi mark (16 mm), stell isi mark (20 mm), pevar block 60mm thikness coloring strenghtg of 300 kg/sq.cm approved quality, 10 mm metal crusher broken (pachgaon), 10 mm metal crusher broken (local), 20 mm metal crusher broken (pachgaon), 20 mm metal crusher broken (local), 40 mm metal hand broken (pachgaon), 40 mm metal hand broken (local), 80 mm metal hand broken, soil bricks is type std size, cement bricks is type std size, chaker tiles, vetrified tiles, tiles, sand transport with roylti, sand transport without roylti, murum transport with roylti, murum transport without roylti, rcc np-2 second 1000mm pipe with collars, rcc np-2 second class 800mm pipe with collars, rcc np-2 second 600mm pipe with collars, rcc np-2 second 450mm pipe with collars, rcc np-2 second 300mm pipe with collars, centring, mixture machine rent with diesel, hand mixture machine rent, hopper mixture machine rent with diesel, rolar machine rent with diesel, tractor water tankar, bleaching powder, slate writing pad, banner, dust bean steel, printing, santary pad, garbage e rickshaw, garbage cycle rickshaw, solar high mast light, solar streat light pol, pevar block 60mm thikness coloring strenghtg of 300 kg/sq.cm approved quality, iron chair 3 seater, m.s.pipe/ angle / squee, g.i. steel, chaker tiles, vetrified tiles, tiles, paver block 6mm, paver block 8mm, gi pipe 1 " 5.5 kg., chain, bearing 6204, cylinder ci brass/ cyl body/ cyl paile, leather washer / ceiling washer, rod golden connecting, socket 32 mm, axle pin, nut bolt 19 no, upper valve/ lower valve, handle complete, head/ water tank, column pipe m.s. (stand), hand pump complete set, pvc pipe ",1 " 10 ft., pvc pipe 3"/6" 10 ft., pvc socket ", 2", 6", pvc coupler 75mm, 160 mm elbow, pvc tee 1",2",3", 6" tunion, elbow, socket,fta,mta, pvc valve ",1",3", tank nipple, pvc tank nipple 1",3",6", pvc bush brass 1/2" ,2" redser, elbow, union, union pvc 1",2",3", elbow brass pvc 1",2" tea, mta pvc 1/2",2", flute valve 1/2",1",2", kaju clip 1", 2", fta 1/2", 1", 2", cap 1",2",3", pvc bend 1",2",3", pvc solvent/ upvc, teplon tape/ electric tape, 10mm nylon rope, 2.5 mm cable/4 mm cable, mcb 3 pol, starter (pump motor)/auto swithch, kitkat 63 amp/32 amp, main switch 440v, pump set 1 hp/2hp, pump set 3 hp, pump set 5 hp/7.5hp, pump set 10 hp, steel nipple / round cap 150 mm, clamp nut bolt / g.i.patti, band 1", 2" gi/ bush 1 ", 2 ", water tank 6 layerplasto, hammer/adjust pana/16mm vice, patti pana set/ring pana set/ adjust pana, sulaj main wall 65 mm/80 mm/160 mm, plas 65 mm, 80 mm, 160 mm, cock nul 1/2", 1", gun metal ferul "/ mdpe fta, water miter, mdpe pipe inch/ hdpe, mdpe fta ", service sydle 110 x 1/2 ", mcb box topson 3-4w, socket switch, socket switch 16a, switch 1w 6a/16a, kaju clip 25mm / 19mm, pipe 19mm/25 mm, man switch 32-240, j.box 19mm 3w, mcb 63a/32a, metal box 3 way, kitkat 32-240/63a-415a, holder, isolator 63a/32a, alu wire 4mm single /twin 90 m, wire 1mm 1.5 mm /90 m, wire 2.5mm/4mm 90m, tape anchor 6mtr/tester, crompton fan 48"/ wall fan, cooler kit, ext box 4 scolet, street light 18w/45w, led bulb 5w/9w, led bulb 22w/40w, bulb 15w/20w, 3core cable 1.5mm /2.5mm/ 4mm /6mm, sanmika board 10*12, street fitting box 1 led, street fitting pipe 1"/2", g.i.tar/g.i tin box, cooler 2.5 ft /4 ft., inverter 1500 seb, battery 1800 ah/2200 ah, screw driver/nose plyer, cutter/penches, patti pane set/ring pana set, wall watch / ele. bel, cooler stand, led driver kit 30w/45w/100w, solar home light with fan and installation, water cooler 80 ltr/20 ltr, r.o. 50 ltr/100 ltr/15 ltr, mini water supply scheme g.i. structure complete 3000 ltr/5000ltr, soalr pump complete 1 hp

corporations/Associations/Others

CTN :40927112

16 Jul, 2025 NA

Sirmaur - Himachal Pradesh

Tender For online electronic bids through electronic tendering system (ets) are inviting e-tender in two bid system for the supply of ropeways spares - ropeways spares, bush for apron feeder, material en-9, as per drg m-1212-27, bush for roller size: 70*59.64*38 mm, en-9, as per drg m-1212-01, apron chain roller with 02 no. gun metal bush fitted, en-19, as per drg m-1212-01, shaft for apron feeder, en-19, as per drg m-1212-27, deliver period: single phase (within 8-9 weeks).note: mtc is required from a government approved lab for all items.

CTN :40922310

23 Jul, 2025 NA

Bathinda - Punjab

Tender For tender for supply of repair and maintenance of submersible motor and monoblock motors : : - repair and replacement of gun metal bush and impellers of 12 and half hp submersible motor , providing of bearing set for 12 and half motor , providing of impeller for 12 and half motor , providing of front and back bush for 12 and half motor , repair and replacement of gun metal bush and impellers of 10 hp submersible motor set , providing of impeller for 10 hp motor , providing of front and back bush for 10 hp motor , repair and replacement of beraing and gun metal bush for 3 hp motor set , providing of bearing for 3 hp , providing of front and back bush for 3 hp , oil seal for bearing for 3 hp , lifting and lowering of 12 and half hp submersible motor and 10 hp submersible motor , desmentalling cleaning rewinding vernishing and heating of existing celling fan of avaolavle size make with required materials ic motor starting running ic all necessary assembling testing and commissioning etc ase required , replacement of suitable sizes of ball bearing in the existing defective ceiling fan exhaust fan assemblying oiling greassing and testing etc as required , sf of fan condencer of suitable capcity of celling fan i c making connection etc as required , 1 hp ac 230 volts 50 hz supply motor , 1200 mm ceiling fan

Central Government/Public Sector

CTN :40932188

31 Jul, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of casnub-22hs cast steel bogies with friction damping arrangement for bg boxnhl. rdso dr awing no. wd-04078-s-01, alt -4, item no. 1 to 18 except item no. 4,6,7,8 &9. rdso specification no wd-1 7- casnub-22- hs-bogie -92, rev-4 of sept, 2024. [ warranty period: 72 months after the date of deliver y ]

Central Government/Public Sector

CTN :40932189

31 Jul, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of cast steel bogie complete assembly for blca & blcb wagon without wheel set & axle asse mbly. drawing no : contr 9404-s-2 alt.7. except item no. 4 to 9 specification no : contr-lccf-20 (c) 96 rev 2 with amend no 2 of sept 2016 for blc wagons. [ warranty period: 30 months after the date of deli very ]

CTN :40903868

24 Jul, 2025 NA

Puducherry - Tamil Nadu

Tender For supply of consumables and non-consumables for the department of central workshop - terms and conditions: 1. for the items where "samples to be shown/provided" is mentioned, the samples should be submitted to the department at the time of quotation submission. the quotation will not be considered if samples are not submitted. 2. for non-consumable items, the brand name should be mentioned for each item. those quotations without brand name will be rejected. 3. the items should be door-delivered to the department of central workshop without any charge (loading / unloading charge, etc.) 4. the expiry date of consumables should not be less than one year after the date of supply. 5. price quoted should be inclusive of gst. 6. the firm should provide warranty for 1 year for the non-consumable items. general section, aluminium sheet 16 swg 8x4 length (isi), aluminium sheet 18 swg 8x4 length (isi), copper sheet 15 swg 8x4 length (isi), m.s.sheet 20g (isi) 8x4 length, m.s.sheet 18g (isi) 8x4 length, m.s.sheet 10g (isi) 8x4 length, m.s.sheet 16g (isi) 8x4 length, steel almirah thread type handle with washer & nut isi marked, godrej bush type steel almirah handle, steel almirah locks & key branded make, steel alimarak godrej lock with key branded make, steel alimarah handle inside fix gun metal with brass revit square type, lock with key for steel table isi marked, drawer handle for steel table, copper wire 8swg, copper wire 12swg, copper wire 15swg, brass pad lock 6" l, brass pad lock 4" l, brass pad lock 3" l, brass pad lock 2" l, ms pad lock 6" l, ms pad lock 8" l, m.s.welding rod 8 swg isi make, m.s.welding rod 10 swg isi make, m.s.welding rod 12 swg isi make, s.s.welding rod 12 swg isi make, s.s.welding rod 10 swg isi make, s.s.welding rod 14 swg isi make, gas welding 1/8" brass rod, gas welding flux 1 kg tin, gas welding carbide stone 5 kg tin, welding hand shield, welding glass (german/checkoslovia) with both sides safety glass. (safety glass+welding glass+safety glass), chipping hammer, wire brush, welding electrode holder, 1" x 1" m.s.square pipe 18 gauge (20 feet length) (isi), 7/8" m.s.round pipe 16 gauge (20 feet length) (isi), 3/4" m.s.channel (20 feet length) (isi), 1" x 1/8" m.s.angle (20 feet length) (isi), 3/4" x 3/4" m.s.square pipe 14 gauge (20 feet length) (isi), 1 1/4"x 1/8" m.s.angle (20 feet length)(isi), 8mm m.s.round rod (20 feet length)(isi), 1" x 1/8" m.s.flat (20 feet length)(isi), 3/4" x 1/8" m.s.flat (20 feet length)(isi), 1 1/2" x 1/8" m.s.flat (20 feet length)(isi), m.s.rod 30mm dia 20 feet length, s.s rod 2.5 mm (20 feet length), s.s rod 6 mm (20 feet length), g.i.pipe 3/4" x 20 feet with isi mark b class, g.i.pipe 1/2" x 20 feet with isi mark b class, 2"x1/8 m.s flat 20ft, bolt nut with washer 3/16"x1/4"l nickel coated, bolt nut with washer 3/16"x1/2"l nickel coated, bolt nut with washer 3/16"x1"l nickel coated, bolt nut with washer 3/16"x11/2" l nickel coated, bolt nut with washer 3/16"x2"l nickel coated, 1/4" x1" m.s. bolt, nut with washer nickel, 1/4" x11/4" m.s. bolt, nut with washer nickel coated, 1/4" x11/2" m.s. bolt, nut with washer nickel coated, 1/4" x2" m.s. bolt, nut with washer nickel, 5/16" x 1" m.s.bolt, nut with washer nickel, 5/16" x 11/2" m.s.bolt, nut with washer nickel, 5/16" x 2" m.s.bolt, nut with washer nickel, 3/8" x 1" m.s bolt, nut with washer nickel, 3/16" x 1" g.i.coating bolt, nut with washer, 5mm x 25mm g.i.coated bolt,nut with washer, 25mm i.d washer with 3mm thickness, nylon bush round type 3/4", nylon bush round type 1", nylon bush round type 1 1/4", nylon bush round type 1 1/2", nylon bush square type 3/4", nylon bush square type 1", nylon bush square type 1 1/4", nylon bush square type 1 1/2", 3/8th (30mm-1 1/4") plastic moulded star head male clamping knob, wheels, 5" (125mm) stem wheel with brake, swivel castor wheel, heavy duty, load capacity - 250kgs, 24" x 1" wheel chair rear spare wheel and solid tire with 3/4" hand push rim, maximum 8 spokes, 7/16th double

CTN :40796949

21 Jul, 2025 NA

Jamalpur - Bihar

Tender For supply of casnub - 22hs cast steel bogies with friction damping arrangement for b.g. box nhl wagon as per rdso's drg. no. wd - 05086-s-01, alt-28 and wd-04078-s/1, alt no. -4, item sl. n o. 1 to 18 (except item sl. no. 4,6,7,8 & 9). as per rdso's spec. no. wd-17- casnub - 22hs bogie- 92 (re v. -4) sept. 2024. [ warranty period: 72 months after the date of delivery ]

Cast Steel Bogie Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector