Latest casting item scrap Tenders | Government casting item scrap Tenders

Central Government/Public Sector

CTN :43756141

27 Feb, 2026 NA

Ajmer - Rajasthan

Tender For supply of casnub 22 hs cast steel bogie with friction damping arrangement as per drawing no.- wd-04078- s-01 alt. 03 or latest (item no.- 1 to 18 except 4,6,7,8 & 9) to rdso specification no.- wd-17-casnub-22 hs bogie-92 rev. 03 of sept-2004 with ammendment 6 or latest. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43698963

07 Mar, 2026 2.99 Crore

Poonch - Jammu And Kashmir

Tender For provn of dry ration stores under ge 881 ews - sch a part-i (building work):-this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., construction of block of storage shed complete all as shown on drawings and as specified., total amount of sch a part - ii (site clearance/development work), total amount of sch a part - iii (internal electric supply work), total amount of sch a part - iv (protective work), total amount of sch a part - v (area drainage work), total amount of sch a part -vi (road, path and culvert work), total amount of sch a part -vii (external electric supply work), total amount of sch a part -viii (demolition/dismantling work), sch a part - ix (misc items of work) note : this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., double walled corrugated (dwc) pipe for cable protection with outer dia 50mm and inner dia 38mm including suitable size of coupler for connection of pipe complete all as specified and directed., point wiring for one light/fan point/call bell point controlled by one way switch 5 amp with 1.5 sqmm single core multi standed copper conductor frlsh insulated and unsheathed heavy duty cable in colour code including earth wire with cable of size 1.5 sqmm copper conductor frlsh insulated, drawn into and including concealed in pvc conduit of not less than 20mm dia and 1.5mm wall thickness (isi marked) terminated into annealed steel terminal boxes including modular plate and cover for mounting modular switch/ socket switches, sockets, fan regulators etc complete all as specified and directed., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on same board., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on independent board., earthing complete with galvanized steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15mm dia gi light grade protection pipe, 20mm dia gi medium grade watering pipe with funnel including charcoal, dust, salt, pcc m-15 type b1 in pit with angle iron (25x25x3)mm frame work with precast rcc 1:2:4 type b-1 cover reinforced with 8mm dia tmt bars @ 150mm c/c both ways and 12mm dia ms fabricated handle, test point etc. in and including light grade gi protection pipe 20mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate no. 3 of ssr part-i complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed.note:- on testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction., inverter led light fittings batten type, 1x20w led, 230v, complete with all accessories internally per wired including lithium lon battery with charging time 8 to 10 hours and back up time up to 4 hours and connecting up with pvc insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified and directed., led street light/ security light fitting 35 watt, 230 v, ac, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 66 protection, including provision of gi bracket made of 40mm dia, gi pipe, 1.5m long, bend to shape, complete all as specified., mcb, spn, 240 volts, 40 to 63 amps,10ka, breaking capacity, complete all as specified., mcb, spn, 240 volts, 6 to 32 amps,10ka, breaking capacity,

Central Government/Public Sector

CTN :43721163

05 Feb, 2026 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor.note-material to be procure through rdso approved sources only. rdso item id 3100606.

Central Government/Public Sector

CTN :43721164

05 Feb, 2026 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum length should not be less than 1500mtrs and balanced qty. in one drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor. ( material to be procured from rdso approved sources only.)rdso item id 3100606

Central Government/Public Sector

CTN :43729796

05 Feb, 2026 NA

Kota - Rajasthan

Tender For supply of joint less hard drawn grooved copper contact wire 107 sq.mm made out of continuous cast copper wire rods in non returnable wooden drum, as per rdso specification no. ti/spc/ohe/cw/0971 with latest amendment.note- material to be procured from rdso approved sources only rdso item id-3100606)

Central Government/Public Sector

CTN :43588226

04 Feb, 2026 NA

Jhunjhunu - Rajasthan

Tender For tender for supply of column discharge as per drg no hcl m c 570a 86 , column clamp as per drg no hcl m c 445a 82 , casing ci as per drg no hcl m c 166 75 moc cast iron gr30 , impeller ci as per drg no hcl m c 226a 76 reva moc cast iron gr30 , shaft sleeve as per drg no hcl m c 638 87 , strainer as per drg no hcl m c 355a 78 , pipe delivery piece as per drg no hcl m c 597 86 , cover end for 6by4 hclmc 408 81 , retainer grease for 6 4 hclmc 409 81 , shaft sleeve item no 3 hcl m c 638 87 , stuffing box drg hcl mc 524 84 , lantern rcstrictor hcl m c 523 84 , shaft spacer hcl m c 523 84 , gland hcl m c 271a 77 , shaft with lock nut as per drg no hcl m c 585 86 , shaft sleeve item no 2 hcl m c 638 87 , lantern restrictor hcl m c 265 77 , grease retainer hcl m c 412 81 , end cover 10by8 pump hcl m c 411 81 , shaft spacer gland seal hcl m c 667 89 , shaft sleeve as per drg no hcl m c 638 87 item no 1 material ss302 , lantern restrictor as per drg no hcl m c 667 89 , shaft with lock nut and lock washer hcl m c 324 78

CTN :43531697

02 Feb, 2026 NA

Sundergarh - Odisha

Tender For supply of cast steel bolster complete for casnub-22-hs (mod-i) & (mod-ii) bogie. drawing no. : rdso s drg. no. wd-04017-s/3, alt. 2 , item no. 1 duly welded with item nos. 2 and 3. material and specification : as per drawing and conforming to rdso s specification no.wd-34-casnub-22-hs (mod-1)-2004, amendment no. 5 of nov 2020. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43532587

02 Feb, 2026 NA

Dahod - Gujarat

Tender For supply of brake beam for cast steel bogie of blc wagon drawing no:- contr-9404-s/17, alt-9 item no-1 to 16 spec. no:- contr-lccf20( c )-96 (rev-2 of dec-06) with amend. no.2 of sept. 2016. u-vam itemid- 3100411009, brake beam. [ warranty period: 30 months after the date of delivery ]

Casting Item Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector