Latest castors Tenders | Government castors Tenders

Central Government/Public Sector

CTN :40010889

25 Apr, 2025 NA

Multi City - Multi State

Tender For supply of intermediate wheel profile checking gauge with calibration certificate for b.g. wheel-sets

Central Government/Public Sector

CTN :39822931

15 Apr, 2025 NA

Bengaluru - Karnataka

Tender For corrigendum : supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial k

CTN :39991873

02 May, 2025 11.14 Lacs

Kinnaur - Himachal Pradesh

Tender For supply of major service kit part no 549286 02 , intermediate service kit part no 558564 03 , bowl spindle part no 522988 01 , worm wheel part no 62805 , worm wheel shaft part no 531430 80 , top bearing part no 64820 , pump service kit part no 547965 05 , distributor part no 7440247 80 , feed and discharge pump part no 529209 82 , washer part no 62761 , spring part no 33355 , ball bearing part no 233213 50 , sleeve part no 63433 , sight glass part no 37166 , rectangular ring part no 65235 , collar part no 14166 , screw part no 2210941 17 , attachment piece for oil purifer

Central Government/Public Sector

CTN :39992116

26 Apr, 2025 NA

Hyderabad-T - Telangana

Tender For supply of installation of furniture - godrej customized dry lab with overhead units and jet black granite top. as per the drawing annexure - i , godrej scintilla on hi base with castors chair , godrej gain pro storage metal door with cam lock, dimensions- h2325 x w1200 x d470mm-3nos. , godrej gain pro storage metal door with cam lock, dimensions- h2325 x w900 x d470mm-4nos. , godrej t25 table l shape with integrated hedu 3dr wooder pedestal with castors, dimensions- w1800 x d750 x h750mm , godrej ace full mesh back with head rest chair , godrej oxbo mesh back visitor chairs , godrej tud metal storage unit, dimensions- h1169 x w1200 x d420 , godrej express office l shape workstation with kbtand cpu trolley with 3dr metal pedestal dimensions- w1500 x l1500 x d600 mm , godrej oxbo high back mesh back chair , godrej express office recta workstation closed on both sides, dimensions- w1200 x d600 mm

CTN :39279105

17 Apr, 2025 3.64 Lacs

Bardhaman - West Bengal

Tender For corrigendum : tender for supply of esp crm gearbox spare - gb pbl model 63c 32 point 1p d71l4 o p shaft , gb pbl 63c 32 point 1p d71l4 gear wheel iind , gb pbl 63c 32 point 1p d71l4 pinion 1st , gb pbl 63c 32 point 1p d71l4 output shaft , gb pbl 63c 32 point 1p d71l4 gear wheel 1st , pbl 63c 32 point 1p d71l4 pinion shaft iind , pbl 63c 32 point 1p d71l4 intermediate ring , gb pbl 63c 32 point 1p d71l4 thrust cover , gb pbl 63c 32 point 1p d71l4 motor gasket , gb pbl 63c 32 point 1p d71l4 distance piece , pbl model 63c 32 point 1p d71l4 circlip set , pbl model 63c 32 point 1p d71l4 2nd pinion , gb pbl 63c 32 point 1p d71l4 2nd gear wheel , pbl model 63c 32 point 1p d71l4 2nd pinion , pbl 63c 32 point 1p d71l4 2nd gear wheel 2nd , pbl 63c 32 point 1p d71l4 2nd pinion 3rd , pbl 63c 32 point 1p d71l4 2nd gear wheel 3rd , pbl 63c 32 point 1p d71l4 2nd dista piece set , pbl 63c 32 point 1p d71l4 oil seals 30x50x7

Central Government/Public Sector

CTN :39964978

23 Apr, 2025 NA

Dausa - Rajasthan

Tender For supply of reflection reception desk 5 w linear desk , pulse mb seat, adj. arms larger seats1 , pisa 1 seater , alice pro coffee table walnut 1 , conclve 8 b.conv 1200d , beat lc high back with seat slide , beat lc mid back with seat slide , aristo tbl 1650 lh ru 1200 pdl , aristo bckunt 1650w 750h , oxbo mid back , marvel high back , marvel mid back , upbeat as per drawing workstation , pulse mb seat, adj. arms larger seats2 , lab furniture as per layout , stools mch ht adj back , finnesse 5026 eru pedestal , free standing ped with castors for finnesse table , pulse aero mb seat with head rest , pulse mb seat adj. arms larger seats 3 , upbeat as per drawing workstation upbeat , vsdu 5 with metal top , vegas corner table fiber red , alicepro coffee table walnut 2 , 203m adv shoe cabinet f wen , gain pro locker product size , euro v2 3str sofa slthr cof br , euro v2 1str sofa slthr cof br , crescent dintbl 8str glass , crescent d choc din chr bkwood

State Government

CTN :39924307

19 Apr, 2025 22.23 Lacs

Jalandhar - Punjab

Tender For supplying and installation of furniture for 4 no. temporary courts at existing judicial courts complex jalandhar - judges - main chair for court & retiring room - providing, supplying and placing of high back chair for dias / retiring room . seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. full back size: 46.5 cm. (w) x 60.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m and hardness load 12 +/- 2 kgf for 25% compression.back spine: the support spine should be made up of high pressure die cast polished hed aluminum.armrests : the armrest should be having two adjustment, height (6.0 0.5cm) and depth (6.0 0.5cm). height adjustment should be provided in aluminum structure of armrest which should be connected to aluminum back spine and should be operated by button. the depth adjustment should be provided in pad which should be fixed to armrest structure. armrest top should be made up of pu molded over plastic inner.active bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features: 360 revolving type front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort tilt tension adjustment can be operated in seating position 5 position tilt limiter giving option of variable tilt angle to the chair seat / back tilting ratio of 1:2 the mechanism housing should be made up of hpdc aluminum & black powder coated (dft 40 to 60 micron)seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 3.75 0.1 cmlumbar support assembly: the lumbar support assembly should consist of lumbar spine (material-glass fiber filled nylon) which should be fixed to aluminum back spine. the lumbar pad (material- poly propylene) should be fixed to lumbar spine through lumbar pad support. lumbar support assembly has height adjustment of 5.0 0.5cm.pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 0.3cm.pedestal assembly with castors:the pedestal should be high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-center dia.(75.0 1.0cm. with castors.)headrest :the neckrest assembly consshould be ts of upholstered neckrest inner(material-polypropylene) with moulded polyurethane foam and polyster fabric.upholstered inner should be fixed to neckrest cover.neckrest should be fixed to back assembly through neckrest spine .neckrest assembly has height adjustment of 5.5 +/- 0.5cm and rotation adjustment of overall 20 +/- 2 .twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter.overall dimensions of chairseat height - min 45.5 to max 55.5cm, reader / steno chair: providing, supplying and placing of mid back chair reader /steno chair . seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. mid back size: 36.5 cm. (w) x 55.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m and hardness load 12 +/- 2 kgf for 25% compression.back

CTN :39651976

17 Apr, 2025 NA

Darrang - Assam

Tender For corrigendum : supply of equipment for basic science laboratory - quinckes tube , torsional pendulum , hall effect experiment , stadiometer , refrigerator , r o water purifier , harpenden calliper , polygon law of forces apparatus , verification of lamis theorem , simply supported beam apparatus , inclined plane setup , bell crank lever apparatus , moment of inertia of flywheel setup , screw jack setup combined , wheel and axial setup , worm and worm wheel setup , reynolds apparatus , bernoullis theorem apparatus , mouthpiece orifice , impact of jet on vanes , triangular rectangular notch , venturi meter and orifice meter , friction factor apparatus miner losses , centrifugal pump constant speed , tachometer , kaplan turbine , hydraulic jump , hydraulic tilting flume , turbine flow meter , micro manometer , metzer binacular microscope , hydraulic mounting press 3t , specimen leveler , damped spring mass vibrating system , static balancing using steel balls , motorized gyroscope , whirling of shaft apparatus , cam analysis apparatus , universal governor apparatus , universal vib vibration lab , epi cyclic gear train holding torque apparatus , turn table apparatus , 4 bar mechanism slider crank oscillating cylinder whitworh 4bar link mechanism , gear trains single stage spur gear with intermediate gear differential gear , stefen boltzman constant apparatus , heat and mass transfer apparatus , thermal conductivity of insulating powder apparatus , heat transfer through heat exchanger apparatus , four probe conductivity energy gap of semiconductor , dielectric constant dielectric constant of insulating materials , capacitance box , he ne laser determination of wavelength of laser , spectrometer dispersive power determination of wavelength of source , bomb calorimeter calorific value of solid liquid lab , digital conductivity meter determination of conductance and strength of the acids and base , photo electric calorimeter determination of absorbance and verification of beers law , refractometer refractoriness of the solids and liquid samples , digital bulk density apparatus to determination of density of solid substances , redwood viscometer no ii to determine the viscosity of thin samples , water analyzers includes calorimeter do conductivity tds ph salinity and temperature , bod incubator determine the amount of biological oxygen required in water samples , cod apparatus determine the chemical oxygen requirement in water samples , torsion testing machine , tensile testing machine springs , vernier calipers 200 mm and 300 mm , universal testing machine 60 tones , dial gauge plunger and lever type with magnetic stand , malus law apparatus , electric vibrator , gray prism spectrometer , newtons ring with spherometer and plano , polarimeter half shade and biquartz , rf oscillator

CTN :39933814

29 Apr, 2025 NA

Liluah - West Bengal

Tender For supply of intermediate worn wheel profile checking gauge , as per rdso drawing no. sketch -92082 having flange thickness 27 mm. material made of hardened stainless steel with laser etched permanent m arking. calibration certificate from nabl accredited laboratory must be provided along with the material. [ warranty period: 30 months after the date of delivery ]

CTN :39639816

14 Apr, 2025 NA

Ernakulam - Kerala

Tender For corrigendum : tender for supply of friction lining support for sfb-25 disc brake , kit contact for contactor 32a , gasket long &seal , gasket , spring , bearing(skf equivalent) , bearing , bearing (skf equivalent) , bearing (skf equivalent) , bearing (skf equivalent) , bearing (skf equivalent) , injector fuel complete(fuel needle valve) , collar bolt , gasket , positioner gov.cont assy , slide ring seal , rounded buna ring , gasket seal , bearing cap intermediate bearing(108) , distance bush(pos-7) , air wheel(pos-10) , round cord seal(pos-70) , cord seal(pos-159) , screw , cocks , cocks , seal gasket , special gasket , cock(r55-f6xr3/8cu) , o ring , valve lub oil pressure maintance regulating , hexagonal nut , torque wrench , luboil cooler water boxes inlet/outlet side , valve safety , strip sealing

Castors Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government