Latest cell Tenders | Government cell Tenders

Central Government/Public Sector

CTN :41010659

31 Jul, 2025 NA

Sivaganga - Tamil Nadu

Tender For supply of cylinder cell fabrication unit

Central Government/Public Sector

CTN :41017614

01 Aug, 2025 NA

Multi City - Multi State

Tender For supply of 2024-25 (ami no.sn 219) cytocentrfuge specifications 1. the equipment should b e bench top centrifuge for cytology specimens. 2. it should be capable of thin layer cell preparation for retrieving cells from various body fluids & preserving their morphology. 3. it should be capable of proc essing up to minimum 8 specimens at one time. 4. it should be resistant to fluid spillage and also close d rotor, chambers for elimination of aerosol. 5. inbuilt safety alarms during all stages of operation shou ld be available. 6. microprocessor based controls & programming for time and speed 7. voltage requir ement : 220v, 50hz. 8. rpm should be 200-2000 9. cell block preparation system should be present in the system. 10. should have digital display for speed and time. 11. time window displays the program med and remaining run time from 1-99 minutes. 12. essential accessories like 200 filter cards. cyctocli ps, reusable funnels (10) etc to be supplied with the system. 13. document supporting track record an d satisfactory performance in govt./ semi - govt./ psu. total installations should be more than 50, and minimum 5 performance certificates from verified from govt./ semi - govt./ psu institutes. 14. equipm ent should be us - fda, european ce and bis /iso approved. 15. two year warranty should be provide d for all components. 16. year wise breakup of cmc charges (for all components) for a period of 5 year s after completion of warranty period should be mentioned as per the following requirement: a) preve ntive maintenance visits 4 times in a year. b) breakdown calls as and when required. c) maximum resp onse time: 2 days. d) maximum downtime: 3 days. e) in case of downtime exceeding beyond 72 hours , similar make & model backup/standby equipment using same inventory as the main equipment shoul d be provided. f) list of items that are not covered under cmc should be provided with their rates & p eriodicity or schedule of replacement. anything not mentioned in the list has to be supplied free ]

State Government

CTN :41005476

15 Jul, 2025 79.93 Lacs

Multi City - Telangana

Tender For providing annual, preventive operation maintenance of 11kv 3.3kv 0.433 kv substation yards, switch gear, protective equipments, starter control panels, overhauling hsc pump sets, indoor, outdoor led fixtures and allied installations located at lingampally, hydernagar, prashasan nagar,alwal, sainikpuri, balaji nagar clear water pumping stations for a period of two(2) years under eam cell sub division ii iii transmisison division.iv, control room.

Central Government/Public Sector

CTN :40996339

15 Jul, 2025 NA

Hyderabad - Telangana

Tender For supply of high throughput system for single-cell and spatial transcriptomics work system, along with ancillary kits and equipment

Central Government / Public Sector

CTN :40994948

15 Jul, 2025 NA

Panipat - Haryana

Tender For annual rate contract on proprietary basis for servicing and supply of spare parts for emerson eim and biffi make actuators for nrpl region - gst % for the tender please select the rate of gst in cell ay13. rate selected shall be applicable for the entire boq., arc on proprietary basis for servicing and supply of spare parts for emerson (eim & biffi) make actuators nrpl region, speed magnetic card assembly part no.4800000211, terminal board part no.4800000m30, power card part no.494pow1020, local interface part no.4800000010, encoder icon 3000 part no.4800003000, processor card icon 3000 part no.494con3301, processor card icon actuator part no.494con3201, position sensor part no.4800000020, bearing kit icon 010 part no.bearingkit010, worm wheel part no.3800100050, worm shaft part no.3800300060, return spring manual control lever part no.3800100091, lever assembly icon 010 part no.4800100150, finger assembly icon 010 part no.4800100180, seal kit icon 010 part no.480010ksl1, worm wheel part no.3800200050, worm shaft part no.3800200060, manual return spring part no.3800200092, lever assembly icon 020 part no.4800200150, finger assembly icon 020 part no.4800200180, seal kit icon 020 part no.480020ksl1, bearing kit icon 020 part no.bearingkit020, bearing kit icon 030 part no.bearingkit030, worm wheel part no.3800300051, worm shaft part no.3800300061, spring part no.3800300090, lever assembly icon 030 part no.4800300150, finger assembly icon 030 part no.4800300180, seal kit icon 030 part no.480030ksl1, electric motor sm11 part no.480sm11100, electric motor sm15 part no.480sm15100, electric motor sm16 part no.480sm16100, electric motor sm21 part no.480sm21100, electric motor sm22 part no.480sm22100, electric motor sm23 part no.480sm23100, electric motor sm31 part no.480sm31100, mcm cover assembly part no.p/n-84832, emerson tec2 4:1 conversion kit, emerson tec2 1:1 conversion kit, act spares itc/service - panipat- 9250, act spares itc/service - panipat- 9260, act spares itc/service - karnal- 925g, act spares itc/service ambala 9269, act spares itc/service nabha 925c, act spares itc/service sangrur 9254, act spares itc/service bhatinda 925h, act spares itc/service jalandhar 926c, act spares itc/service roorkee 9267, act spares itc/service najibabad 9265, act spares itc/service una 9268, act spares itc/service bijwasan 9260, act spares itc/service meerut 9264, act spares itc/service mathura 9262, act spares itc/service agra 9261, act spares itc/service bharatpur 9263, act spares itc/service rewari 9259

Central Government/Public Sector

CTN :40991504

18 Jul, 2025 NA

Pondicherry - Pondicherry

Tender For supply of consumables- dead cell apoptosis kit, fixation buffer, cd36-pb or its equivalent, cd11b-apc or its equivalent, cd203c-pc7 or its equivalent, cd7-ecd or its equivalent, cd33-fitc or its equivalent, cell cycle kit for flow cytometry, perm buffer, fixation buffer, alexa flour, pe mouse anti-human bcl-2,

State Government

CTN :40993310

11 Jul, 2025 9.00 Lacs

Dholpur - Rajasthan

Tender For materials /laboratory regents item required to conduct the lab in chc sarmathura distt dholpur - available test tube , glass wares cover slips per box (20 pkt.) , distilled water 20 ltr. , glass wares e.s.r. pipetto disp. with vaccum plug , plastic wares test tubo stands for blood collection plane 96 iloles 12 mm , plastic wares micro tips 10-200 micro liter , and 100-1000 micro liter , strips urine analyzer multi strips 100 test , strips gluco meter strips , blood grouping anti seras anti abd 10 ml , sero logical ra factor 100 test kit , sero logical widal (slide method) 4x5 ml , sero logical pregnancy cards , sero logical vdrl (50 test kit) , sero logical iiiv tridot test , sero logical hbsag (rapid) , sero logical iicv rapid card , sero logical malaria pv-pf card antigen , sero logical c-reactive protein 25 test , additional glass marking pencil , additional ecg paper roll 20mt. 12 channels , additional ecg jelly 250 gm , additional tissue paper , biochemistry pack size fully auto analyzer horiba albumin 10x44 ml , biochemistry pack size fully auto analyzer horiba alp 2x44 ml/2x11 ml , biochemistry pack size fully auto analyzer horiba amylase 5x22 ml , biochemistry pack size fully auto analyzer horiba direct billrubin 6x44 ml/3x22 ml , biochemistry pack size fully auto analyzer horiba total billrubin 6x44 ml/3x22 ml , biochemistry pack size fully auto analyzer horiba calcuim (a) 10x12 ml , biochemistry pack size fully auto analyzer horiba ck ac 2x12 ml/2x3 ml , iochemistry pack size fully auto analyzer horiba reatine 5x44ml/5x11ml , iochemistry pack size fully auto analyzer horiba jucose 10x44 ml , jochemistry pack size fully auto analyzer horiba hdl holesterol with calibrator x30ml/4x10ml without caliberator , hochemistry pack size fully auto analyzer horiba ldh-5x11/ml/5x4ml , biochemistry pack size fully auto a cholesterol with calibrator 2x30 ml/2x10 ml , biochemistry pack size fully auto analyzer horiba ldl cholesterol with calibrator , 4x30ml/4x10ml without caliberator , biochemistry pack size fully auto analyzer horiba sgot new 6x44 ml/3x12ml , biochemistry pack size fully auto analyzer horiba sgpt new 6x44 ml/3x12ml , biochemistry pack size fully auto analyzer horiba total protein 10x44ml , biochemistry pack size fully auto analyzer horiba triglycerides 5x44ml/5x11ml , biochemistry pack size fully auto analyzer horiba urea 5x44ml/5x11ml , biochemistry pack size fully auto analyzer horiba urc acid 5x44ml/5x11ml , dengue ns1, igm igg imm combo ab/ag , edta k3 tube for cell counter double cap , blood collection vial (plan) , heamo cue 301 microcuvette , jsv actual , jsv iind , typhi dot rapid card , abx diluent , abx lysebio , abx cleaner , mono cleaner , cbc printer roll , fluoride bial , cotton roll , sprit , urine container , handwash

State Government

CTN :41008788

15 Jul, 2025 25.00 Lacs

Bundi - Rajasthan

Tender For spincell 5 compact 5 part cell counter ( sensacore ) related item

Central Government/Public Sector

CTN :41016934

18 Jul, 2025 NA

Multi City - Multi State

Tender For (for vande bharat) cross linked polyolefin thermal insulation (xlpe) sheet/roll of size 1.2 mtr x 16 mtr x 25mm thick cross-linked closed cell polyolefin thermal insulation foam with factory applied alumi num foil for mechanical protection for heat and thermal resistance density 25 kg/m^3 technical specificati ons as per annexure-i, suitable test certificate to be submit. sample to be approve before bulk supply. [ w arranty period: 30 months after the date of delivery ]

State Government

CTN :40980759

22 Jul, 2025 NA

Bankura - West Bengal

Tender For supply delivery and replacement of spares for sub-station at mandalkuli water supply scheme , raipur block under bankura mechanical division, phe dte. - "control transformer supply80 va, 240 v / 110 v", "aux contractor supply (4 no 4 nc)make: siemens / abb, coil voltage: 110 v ac", "pcb relay card supply for avr as per existing circuit ", voltage controller potentiometer (1k) supply, "1100 va ups supply output power wattage 660w or equivalent , input-50 hz , wide input voltage range 145-290 v, 2x 7.2 ah (or equivalent) battery , provides 30-90 min power back upmake: apc, input: 230 v ac", "240 sq. mm. x 3 core, 11 kv grade, indoor type, heatshrinkable end termination kit supply ", "240 sq. mm., 11 kv grade, indoor type, heatshrinkable kit jointing charges", "avr throughout inspection and control operation checking and rectification by opening the cover , checking the throughout circuits with aux. contractor replacement charges, pcb relay card with voltage controller potentiometer replacement charges, control transformer replacement charges, old ups replacement and new ups installation charges fixing of heat srinkable kit & other as per direction . ", supply and delivery of following spares for battery charger panel:, supply of 65 ah smf vrla battery with 6 nos cell, polyproplene container make: exide, consisting of 9 nos. 12 v batteries (model-ep 65-12 or equivalent), "charges for old defective battery rack by disconnection all the electrical circuit and fitting fixing of the new battery rack fittings,connection of all batteries checking otesting for a certain period. ", "supply of 2.5 sq. mm x 4 core cu armored cable forbattery charger panel to 3 panel vcb , as per is-7098 (part-i )", gland supply for 2.5 sq mm x 4 core cu armored cable, laying charges of 2.5 sq. mm x 4 core cu armored cable, "charges for glanding & socketing for 2.5 sq mm x 4core cable for battery charger panel: as per direcrion of eic", "supply and delivery of following spares for 400 kva, 11 kv/433 v, transformer-1 & 2:", oti (4 inch. dia) supply make: ptci, "wti (4 inch. dia) supply make: ptci", oti replacement charges, wti replacement charges, "supply of 2.5 sq. mm x 10 core cu armored cable for 3panel vcb to transformer-1 & 2 as per is-7098 (part-i ) ", gland supply for 2.5 sq mm x 10 core cu armored cable, laying charges of 2.5 sq. mm x 10 core cu armored cable , supply of 2.5 sq mm cu pin lugs , supply of 2.5 sq mm cu fork lugs, "charges for glanding & socketing for 2.5 sq mm x 10core cable of 400 kva, 11 kv/433 v, transformer-1 & 2: as per direction of eic", supply and delivery of following spares for single panel vcb:, 240 sq. mm. x 3 core, 11 kv grade, indoor type, heat shrinkable end termination kit supply, 240 sq. mm., 11 kv grade, indoor type, heat shrinkable kit jointing charges, 200-watt space heater supply make: reco, 230 v , "thermostat supplymake: elcon gold, model: mm-106,range: 30? c - 110? c, 15 amp., 230 / 250 v ac", "3 nos. space heater along with 1 no. thermostatconnection wiring charges as per direction of eic", supply and delivery of following spares for 3- panel vcb: , "240 sq. mm. x 3 core, 11 kv grade, indoor type, heatshrinkable end termination kit supply", "240 sq. mm., 11 kv grade, indoor type, heat shrinkablekit jointing charges", 200-watt space heater supply make: reco, 230 v , "thermostat supplymake: elcon gold, model: mm-106,range: 30? c - 110? c, 15 amp., 230 / 250 v ac", 2.5 sq. mm. s/c, 1.1 kv grade control cable supply for space heater and thermostat wiring , "2 nos. space heater along with 1 nos. thermostatconnection wiring charges for each panel as per direction of eic", "3 nos. space heater along with 1 no. thermostatconnection wiring charges as per direction of eic", attending the fault at mandalkuli, bankura district with carrying different testing, servicing kit/machine like insulating resistance checking machine (1 kv, 2.5 kv, 5 kv) 3 phase variac, current injection machine/ kit, voltage

Cell Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors