Tender For improvement and cementconcretelining to 45l (subudhipalli sub-minor) at rd 705 m and 1260 m of baghua right branch canal of baghua irrigation project for the year 2025-26.
Tender For improvement and cementconcretelining to 24l buguda minor from rd 3885 m to 3940 m off-taking rd 13000 m of baghua right branch canal of baghua irrigation project for the year 2025-26.
Tender For improvement and cementconcretelining to 21l adipur sub-minor from rd 1640 m to 1710 m off-taking rd 11850 m of baghua right branch canal of baghua irrigation project for the year 2025-26.
Tender For improvement and cementconcretelining to 24l buguda minor from rd 3822 m to 3877 m off-taking at rd 13000 m of baghua right branch canal of baghua irrigation project for the year 2025-26.
Tender For improvement and cementconcretelining to 41l sub-minor at rd 400 m of baghua right branch canal of baghua irrigation project for the year 2025-26.
Tender For improvement and cementconcretelining to sodak minor at rd 1680 m of baghua right distributary of baghua irrigation project for the year 2025-26.
Tender For providing electrical supply and fixing windows to new municipal office building in piduguralla municipality under special grant any government/general funds - 1 flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. 2 flooring with non - skid red or white full body ceramic floor tiles of size 600 x 600 mm and thickness between 8 - 10 mm 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete. 3 providing skirting to internal walls to 15cm height/risers of steps with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x600mm and thickness between 8-9mm 1st quality set over base coat of cm (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work, 4 dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300mm and thickness 6mm 1st quality set over base coat of cm (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete. 5 providing impervious coat to exposed rcc roof slab surface with c.m.(1:3) 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including charges all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junction of wall and slab etc, complete for finished item of work as per s.s. 6 supplying and fixing of unplasticised poly vinyl chloride (upvc) sliding windows three track -two glass shutters sliding and one mesh shutter duly manufactured using upvc reinforced profiles of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.0 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2 mm fitted with nylon/ polymer mesh on rollers/ pulley duly fixed with tpv gaskets/ epdm weathering seal resistant accessories like locking system 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work. 7 supply,delivery and labour charges for fixing of 48" (1200mm) cei
Tender For improvement and cementconcretelining to ghodapalana sub-minor in between rd 1200 m to 1500 m of left distributary of baghua irrigation project for the year 2025-26.
Tender For annual supply and repair motors of tmc chikkodi - motor 100hp starter oil, motor 100hp pump soot, nut bolt 6x3, starter oil, seal pipe pvc, site visit charges, gas welding, lathe work., gunmetal welding, gas cutting, welding, jcb., generator., check nutt, spandle, painting to jalkumb, errection and commissioning of transformers including connection of htand lt side earth connections etc complete and giving satisfactory trail run etc complete, transportation and installation of transformer, providing new terminals to 240sqmm cable by crimping 185mm, providing new terminals to 240mm cable by crimping cramping 185mm, supply of breather, supply and fixing of lt busing with sealing stud and bolts etc complete, supply and fixing of ht busing with sealing stud and bolts etc complete, supply of transformer oil including filling of oil by hot process including labour and transportation charges, backing the winding assembly in thermostat oven bill getting mongering valvue etc complete, drying out the assembly of cone, cleaning repair and painting inside the transformer tank with hot oil and acid proof painting outside the tank, hire charges of/day, transformer rewinding charges, motor 100hp mainboard patti, motor 100hp starter patti, main switch kit of chamber switch, transformer repair charges, motor pumpset 7hp 12 stage, motor 100hp borewell operation through mobiles kit, motor 100hp starter box, motor 100hp switch disconnector., motor 100hp volt meter, motor 100hp amphere meter, motor 100hp 32amp 415v fuse, motor 100hp 250amp mcb, motor 100hp rotor rewinding charges, motor 100hp new relay chages (225amp auto tranformer sapple thermal relay), motor 100hp bushing installing charges, motor 100hp coupling bushing, motor 100hp greasing charges, motor 100hp 500amp fuse, motor 100hp c t coil, motor 100hp panel box timer kit, motor 100hp pump transport and refitting charges, motor 100hp water fan, motor 100hp packing set, motor 100hp soot gland, motor 100hp pump neckring, motor 100hp bearing bogala, motor 100hp pump bushing, motor 100hp 6310 ball bearing, motor 100hp pump bearing (a) 6310 rollore bearing, motor 100hp pump shaft, motor 100hp pump couple, motor 100hp terminal kit, motor 100hp transport and installatin charges, motor 100hp bearing plate, motor 100hp motor couple, motor 100hp exhaust fan, motor 100hp rotor lamination charges, motor 100hp bearing den 316 & nde 6315, motor 100hp bearing den 316 & nde 6314, motor 100hp rewinding charges, motor 10hp transportation, turbine 150hp motor hrc fuse, turbine 150hp motor 325amp 440 volt, turbine 150hp motor switch disconnector, turbine 150hp motor volt meter, turbine 150hp motor amphere meter, turbin 150hp motor rotor rewinding charges, starter relay (250amp auto transformer), turbine 150hp motor rewinding 18inch turbine pipe, turbine 150hp motor starter oil, turbine 150hp motor pump head, turbine 150hp motor terminal kit, turbine 150hp motor t t nut, turbine 150hp motor oil circular, turbine 150hp motor starter lining patti, turbine 150hp motor starter repair charges, turbine 150hp motor 250 amp 4 rc fuse, turbine 150hp motor starter guard, turbine 150hp motor starter coil, turbine 150hp motor pump fan, turbine 150hp motor tube, turbine 150hp motor pump bushing, turbine 150hp motor de 2932ge (11) nde 6319, turbine 150hp motor de 2932ge (11) nde 6318, turbine 150hp motor tube bushing clamp, turbine 150hp motor packing set, turbine 150hp motor transport and installation charges, turbine 150hp motor pump neckring, turbine 150hp motor tube bushing, turbine 150hp motor pump shaft, turbine 150hp motor pump stage, turbine 150hp motor bearing, turbine 150hp motor rewinding, cement pole, ml-2 starter contactor, auxilary switch, mk-1 starter relay, amphere and volt meter box, fuse 63amp, fuse 16amp, main switch 32amp, fuse 105amp, fuse 32amp, main switch 63amp, main switch 16amp, main panel board patti, starter relay (225 amp auto transformer sapple, motor 120hp starter rewinding charges, m