Latest cement head Tenders | Government cement head Tenders

State Government

CTN :40476182

31 May, 2025 NA

Chapara - Bihar

Tender For procurement of materials used in the schemes implemented under mnrega. - brick aggregate (single size):40 mm nominal size, stone aggregate(single size) : 40 mm nominal size, stone aggregate(single size) :20 mm nominal size, stone aggregate(single size): 10 mm nominal size brick bats, portland cement, white cement, block board construction flush door, with commercial ply on both faces, unslaked lime, satna lime, moorum, dry distemper, oil bound washable distemper/ acrylic, distemper, cement primer, distemper primer, pink primer (for wood), white cement based putty, black japan, enamel paint, roofing paint for iron sheets in red, colour, water proofing cement paint, plaster or paris, coarse sand (sone sand), fine sand, average rate of mild steel round bars, structural steel such as tees, angles,, channels and r.s. joists, flats up to 10 mm in thickness, steel glazed door, window/ ventilator,, all members viz, f7d, f4b, kll and, k12b etc., mild steel sheets for tanks, mild steel hooks, mild steel rivets, hard drawn steel wire fabric, galvanised steel bolts & nuts 6 mm dia, and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, galvanished steel bolts & nuts 10 mm, dia and 125 mm long round head with, slots, galva nished steel barbed wire, iron pintels including weldded pin, g.i lim pet washer 100, bitumen washer 100, 20 mm dia holding down bolts, mild st eel sheets with bolts and nuts to, rest on pintels, 18 mm t hick flamed finish granite stone, slab, g./. pipes 40 mm dia, r.cc pipes np2 class 300 mm dia, r.cc pipes np2 class 500 mm dia, r.cc pipes np2 class 600 mm dia, r.cc pipes np2 class 900 mm dia, r.cc collars np2 class 500 mm dia, r.cc collars np2 class 600 mm dia, r.cc coll~ np2 class 900 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, vitreous china flat back wash basin, 630x450 mm, vitreous china india type w.e. pan size, 580mm, vitreous china orrisa type w.e. pan size, 580mm, common burnt clay f.p.s. (non, modular) bricks class designation 7.5, common burnt clay f.p.s. (non, modular) bricks class designation 5.00, over burnt (jhama) brick aggregate:, 120 mm to 40 mm size, over burnt (jhama) brick aggregate: 90, mm to 40 mm siize, red oxide zinc chromate primer, coloured inter locking c.c. paver block, sand zone v (jamuna)/local sand, f.p.s. (non modular) clay fly ash bricks, class designation 7.5, 400 g polythene sheet, white marble raj nagar plain 18 mm, thick upto on ~o sqm area, , upvc pipes (working pressure 4 kg /, cm2 ) single socketed pipe 110 mm dia, upvcbend 87.50, 110 mm bend, plain ce iling tiles (bwp type phenol, formaldehyde synthetic resin bonded), 600x600x12 mm), semi perforated ceiling tiles, (600x600x12 mm), binding wire, boulder 50 mm to 200 mm, coloured inter locking c.c. paver block, acrylic exterior paint, metal primer (u.g.), vitrified floor tile 50x50 cm, vitrified floor tile 60x60 cm, vitrifies floor tile 80x80 cm, vitrified floor tile looxl00 cm, border tiles 2c\ox75 mm size, interlocking c.c. paver block (60 mm, thick, m30), high polymer modified quickset tile, adhesive, interlocking c.c. paver block (80 mm, thick, m-30), 80 mm thick m 40 cc paver block, 80 mm thick m 40 cc paver block, (white color), ready mix paint for steel work, ready mixpaint for wood work, tmtc 500 8 mm, tmtc 500 10 mm, tmtc 500 12 mm, tmt fe 500 16 mm, tmt fe 500 20 mm, steel doors and windows ready made, steel door with necessary hinges lugs, and glazing clips excluding other clips, excluding other fittings and their fixing, mild steel wire road 6 mm, steel channel, galvanised stet l corrugated sheets 0.63, mm th'ck l", galvanised steel corrugated sheets 0.50, mm thick, galvanised steel corrugated sheets 0.40, mm thick, galvanised steel corrugated sheets 0.35, mm thick, galvanised steel corrugated sheets 0.80 mm thick

State Government

CTN :40466747

09 Jun, 2025 NA

Balaghat - Madhya Pradesh

Tender For material supply for building, plantation, development works, depot for construction and maintenance -grid 01, iron/rebar (iron rebar) (6mm), iron/rebar (iron rebar) (8mm), iron/rebar (iron rebar) 10mm), iron/rebar (iron rebar) 12mm), iron/rebar (iron rebar) 16mm, cement (sodium carbonate) 53kg, 50kg fine powder, sand per cubic meter, sand - clean as per standard, aggregate 10mm per cubic meter, aggregate 20mm per cubic meter, aggregate 40mm. per cubic meter, stone dust (sandblasting) per cubic meter, murum hard per cubic meter, boulder stone per cubic meter, pottery size of baked brick (94) inch per thousand, brick (slab) size (94) inch per thousand, tungsten sandstone in the form of 100100 mm and 2nd grade smooth clay soil per cubic meter.

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

State Government

CTN :40516057

09 Jun, 2025 1.70 Lacs

Basirhat - West Bengal

Tender For construction of cement concrete road with cover slab from omar faruk house to play ground at champapukur sansad ix

State Government

CTN :40465466

16 Jun, 2025 60.00 Lacs

Morbi - Gujarat

Tender For annual unit rate contract for supplying of construction material at maliya (mi) block of morbi district for mgnrega act - tiles - 600 x 600 x 16 mm, tiles - 600 x 600 x 20 mm, tiles - 600 x 600 x 15 mm, tiles - 600 x 600 x 0.5 mm gi metal, tiles - 600 x 600 x 0.5 mm gi metal with 20 perforation area with 1.8 mm dia holes and having nrc (noise reduction coe cient) of 0.5, hysd bar, brick bats chhara, brick aggregate 40mm size, c.i. greating 100 mm x 100 mm, c.i. nahni trap, cement, cement bags (empty), ceramic tiles, chicken wire mesh 16 x24, coarse sand, common burnt clay bricks conventional size, common burnt clay bricks modular size 20x10x10 cm, crushed stone aggregate for hard quality 10 to 20mm size, crushed stone aggregate for hard quality 10mm size, crushed stone aggregate for hard quality 20mm size, crushed stone aggregate for hard quality 40mm size, crushed stone aggregate for hard quality 40mm to 63mm size, crushed stone aggregate for hard quality 6 to 10mm size, crushed stone aggregate for hard quality 6mm size, diesel, distemper primer, dry distemper, fine sand, flat back wash basin white vitrious china 450mm x 300mm size, flushing cistern white vitrious with c.p. brass handle etc. 12.5 litre low level, fly ash brick, fuel steam coal, granite slab (18 mm thick) 1 side polished, m.s. plate / flat, mild steel bars, murrum/ binding material, polished kota stone slab green. 25 mm thick, pre-cast cement concrete tiles, putty as per isi specification for fixing glass on steel windows., quarry spall., r.c.c heavy duty non-pressure pipe i.s. class np2 300mm dia., r.c.c heavy duty non-pressure pipe i.s. class np2 450mm dia., r.c.c heavy duty non-pressure pipe i.s. class np2 900mm dia., r.c.c heavy duty non-pressure pipe i.s. class np2 600mm dia., rolling shutter rolling shutter of g.i. sheet any size grill, rubble, stone dust, t.m.t. bars fe- 415, vitryfied granite tiles 8 mm to 10 m thick 24 x 24 size dark shade, vitryfied granite tiles 8 mm to 10 m thick 36 x 36 size

State Government

CTN :40516086

21 Jun, 2025 8.77 Lacs

Howrah - West Bengal

Tender For construction of cement concrete road and cover slab drain from mumtaj begam house to aklima begum house via rusiya sk house in ward no 27 under uluberia municipality

State Government

CTN :40516426

14 Jun, 2025 8.88 Lacs

Howrah - West Bengal

Tender For construction of cement concrete road and cover slab drain from merina begams house to arjina begums house via rahima sk house in ward no 27 under uluberia municipality

State Government

CTN :40516663

14 Jun, 2025 8.61 Lacs

Howrah - West Bengal

Tender For construction of cement concrete road and cover slab drain from ajmira begams house to nasi begums house via rubina sk house in ward no 27 under uluberia municipality

State Government

CTN :40516005

14 Jun, 2025 8.94 Lacs

Howrah - West Bengal

Tender For construction of cement concrete road and cover slab drain from masura begams house to rukiya begums house via sokerjan sk house in ward no 27 under uluberia municipality

CTN :40467910

14 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete stores for 3d printed pds - supply of 3d printed reinforced concrete panels along with steel lintels , supply of box sections of size 100 x 100 x 5mm , tmt steel bar 16mm dia fe500 grade , pcc solid block oblique class a bricks , stone patti slab each of size 900 x 300 x 50mm thick , paver block m20 grade with 60mm thickness , flexible polyurethane foams sealant 750ml , exterior weather proof paint , ms loop hole of size 900 x 400mm , ms door of size 900 x 1850mm , sand bag 18 x 34hdpe , pbs roll 20 mtr x 1mtr , bitumen primer , cement opc 53 grade in poly bags of 50kgs each , well graded sand , all in one aggregate , point 5 mm thick metal deck ppgi sheets for placement above box sections for roof casting of size 12ft x 4ft , tmt steel bar 12 mm dia fe 500 grade , binding wire 20 guage point 9 mm anneled , steel cutting blade 4inch dia , distemper oil emulsion , w2 panel , clay bricks oblique fly ash brick oblique aac blocks oblique pcc block

Cement Head Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors