Latest cgi shed Tenders | Government cgi shed Tenders

Central Government/Public Sector

CTN :39645418

22 Mar, 2025 15.50 Lacs

Chennai - Tamil Nadu

Tender For repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and supply and fix

State Government

CTN :39656783

17 Mar, 2025 7.52 Lacs

Hamirpur(Hp) - Himachal Pradesh

Tender For sh finishing walls with acrylic smooth exterior paint of required shade extension of roof to avoid leakage of roof providing and fixing panelled or panelled and glazed shutter wire gauge shutter painting distempering and other minor repair

State Government

CTN :39531644

11 Mar, 2025 9.40 Lacs

Buldhana - Maharashtra

Tender For corrigendum : 1) construction of dhapa ( drain repair) 2) construction of segregation cum plasitc waste management shade 3)construction of community sanitary complex at z.p school at village padali tq. buldhana dist. buldhana

CTN :39573038

20 Mar, 2025 NA

Rajgarh-Mp - Madhya Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - construction of general proposed new construction of shade work 30x60 full bricks work of babdi bioara rajgarh district; construction of general proposed new constructio..

CTN :39601962

17 Mar, 2025 14.99 Lacs

Chatra - Jharkhand

Tender For washing painting and repair including provision of front side open shade at community place shiv mandir near 4 nos. chowk at bachra under gm unit, piparwar area

State Government

CTN :39627023

20 Mar, 2025 20.00 Lacs

Jabalpur - Madhya Pradesh

Tender For repair of sanitary, water supply, gi profile shade, flooring and other repairing work of officers bunglow civil line, jabalpur.

State Government

CTN :39560647

24 Mar, 2025 28.41 Lacs

Bilaspur - Chhattisgarh

Tender For repair & other civil work at b-51 link road & boys/ girls hostel r.c.c. drain & drain, parking shade at cims hospital & repairing of bilaspur (c.g.)

CTN :39562343

25 Mar, 2025 16

Uttara Kannada - Karnataka

Tender For supply of abrasive mounted diamond fg round 1.8mm , abrasive mounted diamond fg inverted cone 1.6 mm , abrasive mounted diamond fg inverted cone 1.8mm , abrasive mounted diamond fg cylindrical 1.2mm, finishing and polishing, f4-f5 , abrasive mounted diamond fg cylindrical 1.4mm , abrasive mounted diamond ra cylindrical 1.4mm , denture adhesive powder bottle 10-15 gm , wax modelling, base plate wax, pack of 10-11 sheets , bur abrasive, white acrylic fig 4 for straight hand piece , base, acrylic resin powder pink shade bott of 450 gm and acrylic resin liquid bott of 227.3 ml, heat cure , base, acrylic resin powder clear shade bott of 450 gm 105and acrylic resin liquid bott of 227.3 ml, heat cure , box denture and appliance , cold mould seal 1 ltr , self-cure acrylic powder pink shade bottle of 110 gm with rapid repair liquid 110 ml , self-cure acrylic powder clear shade bottle of 110 gm with self-cure acrylic liquid 110 ml , teeth acrylic cross linked set of 28 complete, comprising one set each of upper and lower anterior teeth, shades-a1,b3,b2,d2,d3

State Government

CTN :39565418

13 Mar, 2025 4.97 Lacs

Dharamshala - Himachal Pradesh

Tender For repair and restoration of type v residential building at chilgari - wall painting (one coat) with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease,loose pieces of scale and sand papered smooth. complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., painting one coat (excluding priming coat) on previously painted wood and wood based surface with ready mixed paint brushing to give an even shade including cleaning of all dirts,dust and other foreign matter sand papering and stopping with ready mixed paint other than white complete in all respect as per direction and to the entire satisfaction of engineer-in-charge within all leads and lifts., painting one coat (excluding priming coat ) on previously painted steel & other metal surfaces with readymixed paint, brushing oil, grease to give an even shade including cleaning the surface of all dirt,dust and other foreign matter:- with readymixed paint other than whiten complete in all respect as per direction and to the entire satisfaction of engineer-in-charge within all leads and lifts., finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surfaces (one coat) to give an even shade after thoroughly brushing the surface to remove all dirt,loose or softened paint. complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., providing and fixing panelled,glazed or panelled and glazed shutters for doors, windows and clere storey windows including black enamelled iron but hings with necessary screws 40mm thick in 1st class deodar wood. complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., providing and fixing wire gauge shutters using galvanised m.s. wire gauge of i.s. gauge designation 85g. with wire of dia 0.56mm for doors, windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screw 40mm thick (1st class deodar wood). complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., providing steel work welded in built up section trusses and framed work including cuttint, hosting fixing in position and applying a priming coat of red lead paint in grating framed guards bars, ladders, railing brackets and similar works .complete in all respect as per the direction and to the entire satisfaction of the engineer-in-charge., clearing jungle including uprooting of rank vegetation, grass,brush wood, trees and saplings of grith upto 30 cm. measured at a height of 1 metre above ground and removal of rubbish upto a distance of 20 metres outside the periphery of the area cleared. complete in all respects as per direction and to the entire satisfaction of engineer-in-charge witnin all leads and lifts., brick work using common burnt clay building bricks in foundation & plinth in cement mortar 1:6 ( 1 cement : 6 sand ) ist class bricks. complete in all respect as per direction and to the entire satisfaction of engineer-in-charge within all leads and lifts.