Latest cgi sheet Tenders | Government cgi sheet Tenders

Central Government/Public Sector

CTN :41017666

17 Jul, 2025 NA

Multi City - Multi State

Tender For supply of 13 pin uic coupler plug assembly consist of 1.3 mtrs cable and polyamide hose with uic plug both ends similar to schaltbau make as per rdso ms sheet no. rdso/pe/ms/ac/00 51-2011 rev-2. drawing attached with tender. [ warranty period: 6 months after the date of delivery ]

Central Government/Public Sector

CTN :41018653

16 Jul, 2025 NA

Multi City - Multi State

Tender For supply of iron cot with mosquito net frame (as per the drawing enclosed in documents), 1. tubular pip e frame 1, 1/4 inch for leg-16 swg, 2. ms single sheet for cot-14 swg, folded at 4 equal sides. size:75 x 36 x 3 inches, 3.brackets welded for 04 sides, for bolt & nut fittings, 4. tubular pipes of 1 inch for supporting, 5 . rubber bushes 1 inch, for bottom security, 6. 5/8 inch tubular pipe for mosquito net supporting stand, 7. 5 /8 tubular pipe for mosquito stand top fitting. note: all the metal body to be coated with primary and then powder coated, 30 months warranty from date of delivery. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41017456

31 Jul, 2025 NA

Multi City - Multi State

Tender For supply of 3 kvar metalized polypropylene gas filled, wavy cut three phase self healin g type capacitors, rated at 480v, 50hz, rated current 3.6 amps. capacitor should have di scharge resistor and over pressure disconnection. as per rdso modification sheet no. r dso/ pe/ms/ ac/0054-2011 rev-0 or latest. m/s. epcos and m/s. vishay or any other equivalent capac itor confirming to is:13340 with isi marked and having properties as defined in table-1 of rdso modifi cation sheet no. rdso/pe/ms/ac/0054-2011 rev-0 or latest. firm shall submit complete type test re port as per is: 13340 along with latest isi certification. note: product must be isi marked as per is:133 40 and complete type test must have been done from laboratories recognized by bis for the product. l ist of such labs are as below: electrical research and development association, gujarat. ace test labs & metrology pvt. ltd. hi physix laboratory india private limited. central power research institute (cpri ), bangalore. firm must submit type test report of the product for is:13340 obtained from any of above listed labs along with their offer. offers without such test report will not be considered. [ warranty pe riod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41017973

04 Aug, 2025 NA

Multi City - Multi State

Tender For flying insect killer industrial type, supply voltage 230v ac, 50 hz, dimension h-420 mm, l-640 mm, b 250 mm, ms sheet coating with on/off s witch & fuse holder with 2 x 18w actinic bl tube light for wall mounting confirming to rcf specification no edts-155 (rev. a) or edts-118 (rev-e) am-2, corr- 3. [ warranty period: 12 months after the date of delivery ]

corporations/Associations/Others

CTN :41005247

16 Jul, 2025 4.15 Lacs

Multi City - Karnataka

Tender For purchase of equipment for rehabilitation of manual scavengers families under the rehabilitation act- 2013 as self-employment support - push cart- top made ms sheet, ms angle arrangement for 04 wheels with turning facility by handle. push cart with dimension of height-33inches width-37inches length-72inches with handle of the turning of the wheels, supply of zig-zag machine having multi-functional zigzag- the new expert kx-20u zigzag sewing machine seamlessly handles light and medium-weight materials for precision and two-way feeding mechanism- ensures optimal fabric control for impeccable stitching for complete discription of item refer annexure -1

corporations/Associations/Others

CTN :41008592

16 Jul, 2025 NA

Kathua - Jammu And Kashmir

Tender For auction sale of iron scrap items, temporary tin/cgi sheet store sheds

Central Government/Public Sector

CTN :40773560

16 Jul, 2025 20.00 Lacs

Poonch - Jammu And Kashmir

Tender For corrigendum : repair of furniture for units in aor of stn hq bg under ge 881 ews - almirah large steel fd-351,339, 1031, removing unsv shelves of almirah large steel and s&f new shelves made out of 1 mm thick ms sheet with suitable clips/brackets/gas welding (if any) complete all as specified and directed by engr-in-charge., removing unsv foot rest of almirah large steel and s&f of new foot rest made out of 1.6mm thick ms sheet with continuous gas welding complete all as specified and directed by engr-in -charge., removing unsv lock of almirah large steel and s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make godrej/harrison/link, removing of unserviceable handle of almirah large steel and s&f of new steel handle 150mm long with suitable steel nuts and bolts complete all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms round bar 10mm dia all as specified and directed by engineer-in-charge., removing of unserviceable key plate of almirah large steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coats of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel large throughout inside and outside complete with spray machine after properly smoothing the surface all as directed by engineer in-charge., almirah med steel (fd-243, 340, 1032), removing unsv shelves of almirah med steel, s&f of new shelves made out of 1 mm thick ms sheet with suitable clips/ brackets/gas welddng (any one) all as specified and directed by engr-in-charge., removing unsv foot rest of almirah med steel, s&f of new foot rest made out 1.6mm thick ms sheet with continuos gas welding all as spcified in and directed by engr-in-charge., removing unsv lock of almirah med steel, s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make - godrej/harrison/link, removing of unserviceable handle of almirah med steel, s&f of new steel handle 150mm long with suitable steel nuts and bolts all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms bar round 10mm dia all as specified and directed by engineer-in- charge., removing of unservicable key plate of almirah med steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coat of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel medium throughout insided outside complete with spray machine after proper smoothing the surface all as directed by engineer in-charge., locker bed side steel (fd-1029), removing of old unsv hasp and staples of locker bed side steel and s&f of new ms hasp and staples as specified in drg and approved by the engr- in- charge., removing of old unsv conduit pipe of locker bed side steel and s&f of new cp steel 16mm dia 22 guage conduit hanging pipe all as specified and directed by engineer-in- charge., removing of old unsv handle of locker bed side steel and s&f of new cp steel handle 150 mm long as approved by engineer-in- charge., removing of old unsv hinges of locker bed side steel and s&f of new ms hinges 75mm long as approved by engineer-in- charge., removing of old unsv foot rest of locker bed side steel and s&f new foot rest made out of 1.6 mm thick ms sheet with co

Central Government/Public Sector

CTN :40997909

29 Jul, 2025 29.00 Lacs

Jamnagar - Gujarat

Tender For special repairs replacement to e/m equipments and infrastructure at af stn jamnagar under ge (af) jamnagar no 1 - supply, installation and testing air cooled inverter based split ac unit with cooling functions and suitable to operate at ambient conditions of (22 deg c + 3 in cooling mode) air conditoner will have following conditons :- (a) refrigerant - r-410 a/r-32 (b) eer- 5 star rating (c) tonnage - 1.5 tr (d) indoor noise level - not more than 40 db (e) filter - as recommended by oem (f) remote - as recommended by oem including 02 nos remote bty (g) temp display, turbo mode and auto swing facility all specification will be as per is-1391 (part 2) and latest amendments as specified as directed by engineer-in-charge., supply, installation and testing air cooled inverter based split ac unit with cooling functions and suitable to operate at ambient conditions of (22 deg c + 3 in cooling mode) air conditoner will have following conditons :- (a) refrigerant - r-410a/r-32 (b) eer- 5 star rating (c) tonnage - 2 tr (d) indoor noise level - not more than 40 db (e) filter - as recommended by oem (f) remote - as recommended by oem including 02 nos remote bty (g) temp display, turbo mode and auto swing facility all specification will be as per is-1391 (part 2) and latest amendments as specified as directed by engineer-in-charge., note for item no 1 & 2 :- the cost of following items deemded to be included in quoted rate.(a) copper pipe duly insulated between indoor/outdoor unit upto lenght 10mtr for each unit (b) ms bracket for outdoor unit duly power coated with fixing arrangement.(c) making of hole in walls including civil work , sleeves and making good to the disturbed surface/wall.(d) testing and commissioning of the air conditioner to the entire satisfaction of engineer in charge(e) pvc round sheathed copper cable of suitable size for connecting indoor and outdoor unit upto supply point as per site requirement (f) taking down of existing ac and deposited to e/m store yard without any damage., supply and installation of voltage stabilzer for automatic operation single phase naturally air cooled indoor type and designed for input varioution between 180v to 250v without voltage stabilzed at 230v with accuracy of (+) 2.5% and capacity 4 kva as specified as directed by engineer-in-charge., supply and installed voltage stabilzer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 180v to 250v without voltage stabilzed at 230v with accuracy of (+) 2.5% and capacity 5 kva as specified as directed by engineer-in-charge., material & labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4.0 sqmm each, pvc insulated, unsheathed, fire retardant, low smoke (frls) drawn through and including pvc casing capping with all necessary fitting and including one run of single core multistranded copper conductor cable, of size 4.00 sqmm, pvc insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete all as specified and as directed by engr-in-charge.note: 2 runs of main copper conductor, one run earth wire and pvc casing capping will be measured as one running meter for payment., s&f sheet metal enclosure , 20a single pole and neutral with a two pin and earth plug and socket complete in metal clad board (industrial type) with one single pole mcb 32 amp fixed properly on in concealed position all as specified as directed by engineer-in-charge., supply, installation, commissioning and testing in replacement of loop card having 254 devices of both detectors and modules in a single line circuit, slc supports both class a and class b wiring complete as specified and as directed by engineer-in-charge. make: ravel/honeywell/ceasefire industries pvt ltd, supply, installation, commissioning and testing in replacement of addressable smoke detector with base with binary coded address setting. dual leds for 360 visibil

Central Government / Public Sector

CTN :41000133

06 Aug, 2025 NA

Hyderabad-T - Telangana

Tender For supply of miniature circuit breaker (mcb )single pole 25a,415 vac, c- curve frequency 50 hz to l&t model no bb10250c or equivalent as per rdso modification sheet no. rdso/pe/ms/ ac/0094-2024 .rev- 0. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40995594

17 Jul, 2025 9.84 Lacs

Hamirpur(Hp) - Himachal Pradesh

Tender For providing laying truss cgi sheet roofing plastering white washing providing fixing steel doors and windows, frames etc

Cgi Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors