Latest cgi sheeting Tenders | Government cgi sheeting Tenders

State Government

CTN :41189579

12 Aug, 2025 8.09 Lacs

West Tripura - Tripura

Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi

Central Government/Public Sector

CTN :41209674

05 Aug, 2025 5.30 Lacs

Chittorgarh - Rajasthan

Tender For supply of general items - harpic 750 ml , broom large , colin , air wick sachet , air freshner spray , phenyle white , phenyle black , bamboo stick 8 ft , bamboo stick 20 ft , fawdi for sewer cleaning with iron handle , grinding wheel paper 60 no , pencil cell aa , lancer set , almirah lock , glass silicon , thinner oil , ghadi detergent , black paint , white paint , fevicol , chuna for paint , geru powder , chuna powder , measuring tape 5 mtr , khunt handle wooden , hand grinder bosch , soap dispenser , office dustbin steel , dustbin 60 ltr , goggles for welder black , hand gloves rubber , tow chain belt with hook 75 mm 5 mtr , heavy duty tool box multipurpose , hedge cutter machine , right angle , wrench pana 12 inch adjustable , wrench pana 14 inch adjustable , tower bolt , abro tape , surf excel surf top load , bhc powder , pvc nylon wire for brush cutter , mop set , curtain patti , curtain bracket , ss wire mesh , phool jhadu , wiper , welding rod , white cement , plywood 19mm sainik waterproof , plywood 12mm sainik waterproof , plier taparia , screw driver 4 cut taparia , hexa frame , pvc nail clip 8 mm , pvc nail clip 10 mm , pvc nail clip 25 mm , 2 core wire havells , havells wire 0 point 75 mm 2 colour , havells wire 1 mm 2 colour , havells wire 1 point 5 mm 2 colour , mccb 100 amp 4 pole , mccb 200 amp 4 pole , mccb 400 amp 4 pole , fm 1 timer , fan regulator socket type anchor , fan capacitor 2 point 5 mfd , grass pad for desert cooler , pvc gang box 2 plus 2 , led light 30w bajaj , led tubelight 20w phillips syska , pvc casing 1 inch , power plug gang box 16 amp anchor , gi union 1 2 inch , gi union 1 , gi nipple 1 2 inch x2 inch , gi nipple 1 2 inch x 6 inch , gi socket 2 inch , float valve cock 1 2 inch set , pvc waste coupling , cp jali 2 inch , cp jali assorted 5 types , gi socket 1 2 inch , gi socket 1 inch , teflone tape , pillar cock head half turn , gi axe nipple 1 2 inch , pvc solvent , pvc elbow 110mm , pvc elbow 63mm , pvc socket 63mm , cpvc pipe 1 2 inch , iron trunk 3x3x6 , foot mat rubber red , green net , iron cut kabja , cloth hanger iron

CTN :41232566

06 Aug, 2025 4.00 Lacs

West Kameng - Arunachal Pradesh

Tender For supply of hardware items - garden pipe roll 30 mtrs 20mm , gi pipe 50mm , gi union 50mm , gi socket 50mm , gate valve 50mm , tap s oblique s on oblique off , ms oblique coupper gate valve 1 oblique 2inch , ms oblique coupper gate valve 2 inch , upvc pipe 15 mm , elbow , socket , union , health faucet , taflone tape , solvent cpvc , angle valve s oblique s , waste pipe , connection pipe , piller tap 2 in 1 hot and cold , brass mta upvc , brass fta upvc , socket 1 inch upvc , pipe upvc 1 inch , pipe , brass mta , brass fta , pressure booster motor pump 1 point 5hp , blade for honda grass cutting machine , wire for grass cutter , file flat , file round , file tringular for saw sharping , welding rod 315 , welding rod 450 , fevicol 1 ltrs pack , nails 2 inch comma 3inch comma 4 inch comma 6 inch , blade for hand grinder , emery paper round for grinder , screw 40mm , washhandbasin whb , lime , agro net , footmat roll 10 mtrs , plywood 6 feet into 3inch into 12mm , plywood 8 feet into 4 feet into 12mm , white cement , binding wire , vinyal flooring , led tube light 4 ft long , led tube light 2 ft long , led buld 9 oblique 10 watt , insulation tape , wire 2 point 5 sqmm , wire 1 point 5 sqmm , wire 0 point 75mm , wire flexible , mcb 63 amp , mcb 32 amp dp , mcb 16 oblique20 amp dp , tube rod 2 feet for insect killer , 3 pin top plug 5 oblique 6 amp , 3 pin top plug 15 amp , holder pendent , switch socket 15 amp , ceiling light for roof ceiling 5 inch oblique6 inch , pvc box 8 into 4 inch , pvc bo into 4 inch into 4 inch , extension board 5 socket , switch 5 amp , socket 5 amp , cassing capping 1 inch and 1 point 5 inch , armed cable 4 core , helogen rod for heater 10 rod in box , helogen rod for piller room heater , distal water , bty for dg set 30 kva and 10 kva , tubler bty 200 ah exide , invertor 2250watt luminous , led street light 150watt , gyser 20 ltrs , gyser 3 ltrs , gate light solar based

Central Government/Public Sector

CTN :41175395

29 Jul, 2025 NA

Dhanbad - Jharkhand

Tender For replacement of damaged tennis net at sports complex, replacement of damaged r.c.c. slab of football ground and replacement of m.s. ladder and g.i. pipe alongwith arrangement of half around scaffolding at big overhead tank in colony area at csir-cimfr

State Government

CTN :40986206

31 Jul, 2025 8.50 Lacs

Ratlam - Madhya Pradesh

Tender For corrigendum : supply of sanitation goods building material for sub jail sailana --, , bamboo broom sweeper, date palm broom, limestone, red soil (ochre), washing soap, washing powder, bathing soap, mustard oil, coconut oil, phenyl, toilet acid, painting brush, toilet brush plastic, oil paint, turpentine oil, colgate tooth paste, tooth brush, tongue cleaner, scissors hair cutting, razor, shaving blade, matka with lid, plastic mug, comb plastic, broom sieve, flour sieve, plastic bucket 5 liter, plastic bucket 15 liter, wheat sieves, starter tube light, tube rod, tube holder, wire bundle copper 1/18, wire bundle copper 3/20, led bulb 9 watt, led bulb 14 watt, led bulb 18 watt, led flood light 30 watt, led flood light 50 watt, tape roll, light switches, bulb holders, cut out 63 ampere, cut out 16 ampere, power plug 15 ampere, fan regulators, main switch 63 ampere, main switch 32 ampere, five pin socket, two pin socket, mcb 63 ampere, mcb 32 ampere, elbow gi 1/2 inch, bend gi 1/2 inch, t gi 1/2 inch, elbow pvc 1/2 inch, bend pvc 1/2 inch, tpvc 1/2 inch, elbow gi 1 inch, bend gi 1 inch, tgi 1 inch, elbow pvc 1 inch, bend pvc 1 inch, tpvc 1 inch, gi pipe 32 mm, mosquito net steel, union upvc, gate wall brass, handle wall up pvc, tap gi, tap plastic, brick, coarse sand trolley, sand rate trolley, cement bag, black ballast coarse, black ballast powder, tin sheet 4*10, tin sheet 4*12, iron angle, tiles big, iron rebar, light fitting pipe 1 inch

corporations/Associations/Others

CTN :41036076

05 Aug, 2025 NA

Anpara - Uttar Pradesh

Tender For supply of green net and gi wire for ash silo for gorbi for ash handling division of 2x500 mw dtps anpara

CTN :40950140

28 Jul, 2025 NA

Panchkula - Haryana

Tender For corrigendum : empanelment of firms for supply of greenhouse material and repairing of greenhouses - replacement of existing poly sheet on roof, sides, entry gate, corners, etc. , replacement of profile (aluminum material) , replacement of profile (gi material) , replacement of spring (gi) , replacement of thermal net under the roof (50%) , replacement of shade net under the roof (50%) , replacement of supporting wires (3mm) for thermal/ shade net , replacement of pulleys for thermal/ shade net , replacement of pulling rope for thermal/ shade net (plastic material, 8-10mm thick) , replacement of plastic locks for thermal/ shade net , replacement of insect proof uv stabilized on all ventilation portions. , replacement of rolling pipe for side vents (27mm) , fitting material-curtain clamps (2mm thickness) , replacement of cooling pads (26 ft 6 inch) , replacement of alloy aluminium frame water recirculation system for cooling pad (86 ft 6inch) , replacement of pvc drain pipe for water recirculation system in cooling pads (63-90mm as per requirement) , replacement of gutter (2mm) , replacement of rain water gutter end cap (dia. 4) made from gp sheet duly machine fixed with gi clamp nut bolt with pvc drain (at the end) , replacement of axial fans(1250mm, 1.5hp) , supply and installation of air circulation fans (400-500mm dia. ss body, sealed motor, air capacity 4400 cfm) , replacement of polycarbonate sheet (6mm) all sides and top , replacement of existing poly sheet on roof, sides, entry gate, corners, etc. , replacement of profile (aluminum material) , replacement of profile (gi material) , replacement of spring (gi) , replacement of thermal net under the roof (50%) , replacement of shade net under the roof (50%) , replacement of supporting wires (3mm) for thermal/ shade net , replacement of pulleys for thermal/ shade net , replacement of pulling rope for thermal/ shade net (plastic material, 8mm thick) , replacement of plastic locks for thermal/ shade net , replacement of insect net , replacement of bottom apron (160gsm, 1.5 m wide) , replacement of trellising system , replacement of gutter (2mm) , replacement of side vent rolling pipe (27mm) , fitting material-curtain clamps (2mm thickness) , replacement of rain water gutter end cap (dia. 4) made from gp sheet duly machine fixed with gi clamp nut bolt with pvc drain (at the end) , replacement of four-way foggers (28lph) , drip line dia. 16mm, in-line emitters with 30cm spacing, flow rate 2lph

CTN :41121164

31 Jul, 2025 30.00 Lacs

Kumarghat - Tripura

Tender For supply of hardware item for different works under ee, rd kumarghat division, unakoti dist. during the year 2025-26. - supply of hardware items:-, isi marked butt hinges in/c screw - 100x58x 1.90 mm (mowjee / equivalent brand), isi marked butt hinges in/c screw- 75x47x1.70mm (mowjee / equivalent brand), isi marked butt hinges in/c screw- 125x58x1.90mm (mowjee / equivalent brand), hard board (isi)(4mm thick), isi marked door window handle 125 mm (heavy quality) in/c screw aluminum (mowjee / equivalent brand), isi marked m.s. sliding door bolt- 300x16 mm (mowjee / equivalent brand), wood based alternative door shutter(30mm thick) with frame, wood based alternative door shutter(30mm thick) without frame, isi marked tower bolt- barrel type-200x10mm (mowjee / equivalent brand), isi marked tower bolt- barrel type-100x10mm (mowjee / equivalent brand), isi marked parliamentary hinges with screw- (125x125x27x2.8) mm (mowjee / equivalent brand), hooks & eyes-200 mm long, bwp plywood (isi)(4mm thick), bwp plywood (isi)(6mm thick), bwp plywood (isi)(12 mm thick), black iron wire, gi wire (22 swg), coir rope, gi plain sheet (0.3 mm thick), pvc mosquito net of 1st category, mortice lock for flush door (8-lever)(isi), hydraulic door closer(gun metal, double acting spring hinges) (isi), nails-(all size), holding down bolt (16 mm), m.s. hold fast, barbed wire (9.38 kg / sqm), formica (standard quality)(isi)(all shades), joint bolt 40 mm, joint bolt 25 mm, m.s. fan clamp (16 mm dia), polythene, seiving net (for sand, concrete), j hook 6 mm dia, iron buucket(medium size), cc jail, dhari mat (1.37m x 1.83 m), gi screw, door lock (link)(more than 50mm dia), plain glass (4 mm thick), plain glass (6 mm thick), colouring glass with shade (4 mm thick), one way colouring glass (4 mm thick), glass panes (frosted) 4mm thick and 25 mm width for tiles fitting., aluminium ball (medium size), hammer(medium size), hexo blade(double edged), hexoframe, spade (tata/ isi), shovel (belcha)(tata/ isi)

Central Government/Public Sector

CTN :41113992

06 Aug, 2025 54.88 Lacs

Dimapur - Nagaland

Tender For supply of dsitc of 40kw pv solar plant at fire station building , dsitc of 10kw pv solar plant at power house building. , supply, installation, testing and commissioning of acdb panel. , net metering arrangement and liaising charges with dept of power nagaland. , supply of 3.5 x 185 sq.mm xlpe insulated armoured , laying of one number xlpe armoured power cable in open duct above 95 sq. mm and upto 185 sq. mm , laying of one number xlpe armoured power cable in open duct upto 35 sq. mm , laying and fixing of one number xlpe armoured power cable in cable tray above 95 sq. mm and upto 185 sq. mm , laying and fixing of one number xlpe armoured power cable in cable tray upto 35 sq. mm clamped with 1mm thick shaddle. , laying of one number xlpe armoured power cable in the existing pipe as required above 95 sq. mm and upto 185 sq. mm , supplying and laying of 120 mm dia dwc hdpe pipe direct in ground. , supplying and making end termination 3.5 x 185 sq.mm , supplying and making end termination 3.5 x 35 sq.mm , providing, laying and fixing of 100 mm dia gi pipe , sitc of smart rfid based electronic cable marker 220 mm dia , operation and aicmc 1st year after dlp , operation and aicmc 2nd year after dlp. , operation and aicmc 3rd year after dlp , operation and aicmc 4th year after dlp , operation and aicmc 5th year after dlp

State Government

CTN :41059618

30 Jul, 2025 16.65 Lacs

Dewas - Madhya Pradesh

Tender For supply of factory items - biranji all size me , fevicol marine , favicol s.r.998 , thinner , iron pipe square , touchwood varnish , foam 03 inches , foam 02 inches , rengjin , rejmal paper , round iron pipe , iron cutting cards , iron grinding cards , oil paint , plastic cane for weaving , plywood 18 mm , plywood 12 mm , plywood 09 mm , hitex , aibrotape , carbon brush glander cutter k , drill machine for beet wood , drill machine for beat iron , grinder address , steel screws , pop screw , cloth cushion , foam sheet 01 inch , stapler peen , rejmal cloth roll , polishing powder , sanmica 01 mm , cutter machine address , mosquito net steel , iron leaf , welding rad , the hammer chaikore , g.i. sheet 18 gauge , g.i. sheet 20 gauge , g.i. sheet 22 gauge , g.i. sheet 24 gauge , oxygen gas refill , carbite , beed rad 08 including 90 rad , velvet cloth , sohaga , wooden teak teak , wooden arkut , sewing machine oil , sui different number key amber , needle small machine key , satal , cloth khadi , thread thickness 1000 meters , thread thickness 200 meters , button , interlac thread knots , scissors 10 inches , hand cutter 09 inch machine , foam 03 inch 40 density , foam 02 inch 40 density , fiber glass glasses , eva sheet 4'x6'(various in mm) , dewright salvation (1st peck main) s.r. 998 , black belt nylon straps (various sizes) , shuttle (for leather sewing machine) , thread 40 no. (in 1500 m) in angle , bobbin (leather sewing machine key) , bobbin (kesh leather sewing machine key) , slide plate , feed the dog , chain (in different numbers) , round ring steel men (various sizes) , repeat steel men (various sizes) , magnet buttons (various sizes) , for runner bag (various sizes) , ring button steel main (100 pcs per packet) , for adjuster beg (various sizes) , pippin , leather swing machine ( juki 04 number) , leather contig machine , rapi , kenchi 05 no , scale steel (01ft, 1.5ft, 02ft)

Cgi Sheeting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government