Get complete information related to latest Chain Mosaic Bench Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Chain Mosaic Bench Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Chain Mosaic Bench Tenders.
Tender For supply of commercial or mr plywood is 303 grade 8ft x 4ft x 4 mm , commercial mr plywood is 303 grade plywood 8ft x 4ft x 6 mm , commercial mr plywood is 303 grade 8ft x 4ft x 12 mm , commercial or mr plywood is 303 grade 8ft x 4ft x 18 mm , commercial or mr plywood is 303 grade 9ft x 6ft x 12 mm , waterproof or bwr plywood is 303 grade 7ft x3ftx12mm , commercial or bwr plywood is 303 grade 7ft x4ftx12mm , sunmica size 4ftx8ftx 1mm wood colour , sunmica size 4ftx8ftx 1mm black colour , sunmica size 4ftx8ft x 1mm white colour , 2nd class well seasoned hard wood scanting of size 1.5inch x 4inch x 7ft long , 2nd class well seasoned hard wood scanting of size 3inch x 2inch x 7ft long , 2nd class well seasoned hard wood scanting of size 2inchx3inch x12ft long , 2nd class well seasoned hard wood scanting of size 3inchx3inch x12ft long , 2nd class well seasoned hard wood planks of size 12inch x 1.5inch x 12ft long , 2nd class well seasoned hard wood planks of size 12inch x 1inch x 12ft long , 2nd class well seasoned hard wood scantling of size 4inchx3inchx12ft long , 2nd class well seasoned hard wood scantling of size 1.5inchx3inchx12ft long , 2nd class well seasoned hard wood scantling of size 1.5inchx4inchx12ft long , pre laminated particle board 8ft x 4ft x12 mm , pre laminated particle board 8ft x4ft x18mm , hard wood beeding 1.5inch x 0.50inch , moulded wood beeding 20 mm x 8 mm , pvc edge band tape 0.5 inch thick , pvc edge band tape 0.75 inch thick , countersunk flat head screw 0.50 length for acp panelling , countersunk flat head screw 1inch length for acp panelling , 3 m double sided tape , pvc gitti white 25 nos per box , silicone sealant for acp sheets , alumunium groove cutting blade 10 cm dia , masking tape 1inch width , drill bit 2mm for iron , drill bit 3mm for iron , drill bit 4mm for iron , drill bit 5mm for iron , drill bit 6mm for iron , screw driver 12inch , screw driver set star type , half chizel , hammer ball pin 400 gm , claw hammer 510 gm , iron wood planner 18inch , bosch 4inch 670 w angular grinder , carpenter edge 1.25 kg , bench vice 4inchx 8inch , wood work vice 7ft long , g clamp , hammering concrete bit 4 mm , hammering concrete bit 5 mm , hammering concrete bit 6 mm , hammering concrete bit 8 mm , hammering concrete bit 10 mm , hammering concrete bit 12 mm , blade 7inch for bosch eco circular saw blade gks 190 , blade tct circular 7inch dia circular saw blade for acrylic sheet cutting , 10inch dia circular saw blade , star screw driver kit , steel allen key set , hex driver power drill socket for self driven screw , check nut for sd screw , ibell gasoline chainsaw 56 cc magnesium alloy crank case 18inch guide bar length with chain , blade grinders essential machine , grinding wheel for blade grinder , bh2 screw dirver plus and minus bit , triangular file 4inch , half round file 12inch , right angle 12inch , steel measuring tape 3 m length , steel measuring tape 5 m length , steel measuring tape 15 m length , ft30 fiberglass top line measuring tape 30mtr , heatex , vacum handle for glass , bush for table dsize //bid details 2 / 50
Tender For mr-n-24-25- jhajha-01 (kiyajori to jogiyatilha) - kiyajori to jogiyatilha clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 100 m as per technical specification clause 303.1., for 100 m lead @ 80 %, for 100 m lead @ 20 %, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less than 150kg/cm, opc to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant , trasported to site, laid with a paver with electronic sensor , compacting with 8-10 tonnes vibrartory roller, finishing and curing., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum s
Tender For mr-n/24-25 sasaram-02/01 - l068-t05 to panrwa (vr37), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material(grade 2) : construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., water bound macadam with stone screening gr-ii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405., water bound macadam gr iii : providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.2 to 0.25 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of panel concrete ,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per caluse 1501.2.2 m 30(grade) coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2 cum capasity and appropriate weigh batcher using approved mix design ,laid in approved fixed side formwork (steel channel,laying and fixing of 125 micron thick polythene film,wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continous operation including provision of contraction and expansion ,construction joints, ap
Tender For t04 to nathopur via bisanpur length - 1.561 km - setting out pillars providing & fixing of working benchmark pillars 2 nos. per km & 6 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling brick/tile workdismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per technical specification clause 202., dismantling of structuresdismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202.a) reinforced cement concrete, removing all types of hume pipe and stacking within a lead of 1000m including earthwork and dismantling of masonary works as per technical specification clause 202.1 .b) above 600 mm to 900 mm dia hume pipe, box cuttingexcavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, construction of embankment with approved material deposited from road way cutting and excavation from drain and foundation of other structures and excavated with an average lead of 50 m graded and compacted to meet requirement of tables 300.1 and 300.2 as per technical specification clause 301.5 (including royality & labour cess)., construction of embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m & 100 m as per technical specification clause 301.5 . (including royality & labour cess).for 1000 m lead @ 20 %, for 100 m lead @ 80%, construction of subgrade and earthen shouldersconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., granular sub-base with well graded material (table 400.1)( by mix in place method ) for grading i materialconstruction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means) providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., prime coat (low porosity)providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of
Tender For supply of screw brass 3 by 4 inch , screw brass 1 by 2 inch , nails 1x 1 by 2 inch , nails 1x 1 by 4 inch , nails 3 by 4 inch , nails 1 by 2 inch , nails 5 inch , nails 4 inch , nails 2 and 5 inch , anabond 666 to 500 gram , thread lock 50 mi , o ring kit size inches rubber , o ring kit size mm rubber , loctite , gland packing 3 by 4 inch , gland packing 6mm , varnish sheelac , screw brass 1x 3 by 4 inch , screw brass 1 inch , table grinder wheel 6 inch , acrylic pasting glue , oil stone 8 inch , circular saw cutting blade , hinges kuff center , hinges kuff inner , hinges kuff side , drill bit 01 to 10 mm cobalt , concrete drill bit 05 to 13 mm , cable tie 4 inch kss nylon , anabond auto gasket marker red big , ball valve 1 inch , ball valve 1 by 2 inch , self locking fastener 3 inch , self locking fastener 2 inch
Tender For supply of providing water proofing treatment to old terraces , providing and applying water proofing treatment , crack groove cutting , crack sealing filling using epoxy mortar , providing and fixing of 12 mm nozzle in the crack portion , providing grounting of nozzles with low viscosity epoxygr out including material, labour complete in all respect. , providing antitermite treatment to the sides of flooring , removing cement tiles, or marble or polished shahabad floor or dado without bed concrete , providing and laying in position flooring of telephone black amba white cat bary brown ruby red ocean brown granite stone of approved shade and size , providing and laying vitrified mirror glossy finish tiles , providing and laying vitrified rustic matt finish tiles , providing and laying ceramic tiles , providing and fixing 30mm thick both side prelaminated solid panel pvc door shutter , providing and fixing on walls ceiling floor 32 mm dia cpvc pipe , providing and fixing on walls ceiling floor 25 mm dia cpvc pipe , providing and fixing on walls ceiling floor 20 mm dia cpvc pipe , providing and fixing on walls ceiling floor 15 mm dia cpvc pipe , providing and fixing white european type wall hung pan , providing and fixing table top white wash basin , providing and fixing 1st class white glazed earthenware orissa type w.c. , providing and fixing 8cm c.i. nahani trap including c.i. grating bend and piece of c.i. pipe upto the outside face of the wall complete. , providing and fixing 15cm x 10cm salt glazed stoneware gully trap , providing, laying and fixing, jointing supreme eco- drain 160 mm , providing and fixing 450mm x 550mm size superior type belgium mirror , providing and constructing brick masonry inspection chamber 90cm x 45cm x 90cm , providing and laying for 150 mm dia salt glazed stoneware pipe , providing and fixing divertor with overhead shower, showerarm, spout, hand shower , providing and laying minaral fibre board 600 x 600 mm etc complete , providing and applying two coats of wall care putty , providing and applying plastic emulsion paint , providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces , providing and applying two coats of synthetic enamel paint , disposal of building rubbish malba similar unserviceable dismantled or waste materials
Tender For supply of shelter part and construction material - shelter part , store rack , chair writing , writing table , hand held fire extinguisher , almirah steel large , smoke alarm , heat alarm , ordinary portland cement 43 grade , sand fine best quality , stone aggregate graded 20mm , stone aggregate graded 40mm , stone aggregate graded 63mm , pcc solid block , chequered cement concrete tiles , industrial tiles full body vitrified ceramic , tmt bar 8mm dia , tmt bar 10mm dia , water proof plywood , wooden scantling , nails , binding wire , white cement , water proofing compound , lime unslaked of best quality , pvc strip of size 3mm thick 38mm wide , electric earting set complete with items , surface and wall mounted led tube rod 15 watt , pixel bulk head fittings in deep drawn , ceiling fan 1200mm sweep , pvc insulated 1100 volt grade cable , porcelain insulating hangers , pvc copper conductor cable of size 1 point 0 sqmm , pvc copper conductor cable of size 1 point 5 sqmm , pvc copper conductor cable of size 2 point 5 sqmm , modular switch piano flush type 6 amp 240 volts , modular switch piano flush type 16 amp 240 volts , modular socket outlet multipurpose 2 in 1 of 16 amps , surface mounting modular switches 12 module , surface mounting modular switches 6 module , combined cover plate with frame modular switch 12 module , combined cover plate with frame modular switch 8 module , ceiling rose surface bakelight , pvc flexible pipe heavy duty 20mm dia , mcb db 6 way spn 240 volt , mcb 10 a sp 240 volt breaking cap 10 ka , mcb 20 sp 240 volt breaking cap 10 ka , mcb 32 dp 240 volt breaking cap 10 ka , pvc casing capping 38mm wide , pvc coupler for 38mm casing and capping pipe , pvc tee for 38mm casing andcapping pipe , pvc sockets for 38mm casing and capping pipe , pvc corner bend for 38mm casing and capping pipe , pvc elbow for 38mm casing and capping pipe , pvc junction linker 75 x 75mm , house service bracket complete with 3m long gi pipe , pvc conduit pipe 20mm dia , pvc coupler for 20mm dia conduit pipe , pvc elbow for 20mm dia conduit pipe make , pvc space bar saddles for 20mm dia pvc pipe , insulation tape 19mm width 25m long , no 8 x 19 csk screw full threaded , no 8 x 32 csk screw full threaded , no 8 x 50 csk screw full threaded , no 8mm x 75mm bolts and nut full threaded
Tender For supply of red or , filling in plinth and floors with contractors material or brought from outside and approved by engineer incharge , providing and fixing country cut teak wood double or single leaf second class fully panelled door shutter , providing and fixing partitions made up of cctw frame of size 75 mm x 50 mm at 60 cm , library area table providing and fixing of free standing table at 1350lx750dx 750ht , providing and arrangemnt of mid back, normal syncro mechanism , fixed armrest , gaslift for seat height adjustment, standard 5 prong or nylon base with leather upholstery , free standing table at 1500lx600dx750ht providing and fixing table of size 1500 x 600 x 750 mm. , toughened glass 12 mm , conference table at 3600lx1400dx750ht providing and fixing of main table made up of 18plus18mm thick mdf top with pvc membrane finish and waterfall edge profile. , providing and arrangemnt of high back, synchronized mechanism with multiple locking, adjustable armrest, , supplying and fixing samsung led backlit lcd 55 3840x2160 uhd smart tv,tizen os mount type both table , providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour , providing and fixing rollar blinds ami make or approved make and shade of 38mm round aluminium channel with blackout fabric , providing and laying antiskid ceramic tiles of approved quality of size 30 cm x 30 cm , providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding i.s. for dado and skirting in required position , providing and fixing on walls or ceiling or floor 15 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion , providing and fixing on walls or ceiling or floor 25 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion , providing and fixing on walls or ceiling or floor 40 mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion , providing and fixing c.p. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange , providing and fixing 450mm x 550mm size superior type belgium mirror with 16mm dia. nickel plated towel rod , providing and fixing 100 mm dia stabiliser pipe or p.v.c. soil vent or waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps , providing and fixing white european type wall hung pan, of size 350mm x 355mm x 570 mm concealed flush tank with floor mounting frame , providing and constructing brick masonry inspection chamber 90cm x 45cm x 90cm , providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber , sliding window 3 track 2 glass shutter plus 1 flymesh of approved make with dgu, providing and fixing of sliding , carpenter i class skilled , providing and fixing table top white wash basin of size 120x635x405mm rubber plugs and brass chain
Tender For purchase of book and equipment for 8 block and zp office - 01. wooden book self with front glass:-(a) dimension = 40 cm x 100 cm x 190 cm. (b) wood type(solid) =mango/shree sham/ teak. (c) mounting type= floor mount. (d) no. of shelves = 5 (e) shape = rectangular (f) finish type = lacquered, 02. wooden book self:-(a) dimension = 20 cm x 90 cm x 167 cm. (b) wood type(solid) = mango/shree sham/ teak. (c) mounting type = wall mount/floor mount. (d) shape = x-shape(e) finish type = lacquered , 03. wooden book self(mini glazed):-(a) dimension =28 cm x 60 cm x 110 cm.(b) wood type(solid) = mango/shree sham/ teak.(c) mounting type = floor mount.(d) no. of shelves = 4(e) shape = rectangular(f) finish type = lacquered, study table, wooden:-(a) dimension =60 cm x 115 cm x 76 cm.(b) wood type(solid) = mango/shree sham/ teak.(c) shape = rectangular(d) finish type = lacquered, chair:-(a) dimension =41 cm x 40 cm x 82 cm.(b) wood type(solid) = mango/shree sham/ teak(c) arm style= aramless(d) back style = solid backe) finish type = lacquered, desktop set:-a) operating system windows 11 home with lifetime validity(b) cpu model= core i7 14th genaration(c) cpu speed =3.6 ghz(d) graphics card description= integrated(e) graphics processor = integrated intel uhd graphics (f) pre installed = ms office home and student 2021(g) display = 27 fhd, ips display, anti-glare(h) processor brand = intel(i) drive memory storage capacity = 1 tb ssd nvme 2.0(j) ram memory installed = 16 gb(k) ram memory technology = ddr 5(l) ram memory maximum size = 32 gb(m) camera = 5.00 mp camera + 1r(n) speaker = 3 nos x 2 harman(o) additional feature = wireless keyboard and mouse, wi-fi, ethernet, blue tooth connectivity and usb ports., table lamp = good quality, metal dustbin = good quality, cushion chair = good quality of supreme or equivalent, equipment:-(a) rodometer = good quality of jcb or equivalent(b) measuring tape(30m) = freemans or equivalent(c) measure tape(5 m) = steel blade, auto lock(d) measure tape(50m) = freemans or equivalent(e) laser distance meter = bosch or equivalent, minimum 40 m range(f) weight machine = fishing hook type, digital weighing scale(g) rebound hammer(in n/mm2) = bosch,langry or equivalent(i) auto level = bosch or equivalent, book:-science & general studies (a) indian policy by laxmikanth., (b) a brief history of modern india-spectrum publications., (c) indias struggle for independence- bipan chandra, (d) indian economy by ramesh singh, (e) certificate physical and human geography- by gc leong, (f) ncert book-class 6th to 12th, (g) indian art and culture by nitin singhania, (h) seience and technology- pear son publication, (i) social justice-pear son publication-nkc, (j) world atlas- orient, (k) india after independence by bipin chandra, (l) history of medical india by satish chandra., (m) ancient india by rs sharma, (n) introduction to the constitution of india by dd basu, (o)challenges to internal sequirity of india by ashok kumar, (p) concept of physics by hc verma, (q) problem in general physics by ie irodov, (r) ncert text books for class xi & xii, (s) organic chemistry by op tandon, (t) understanding physics by dc pandey, (u) concice inorganic chemistry by jd lee., (v) mordern approaches to chimical calculation by rc mukherjee., (w) a guide book to mechanisam in organic chemistry by petter sykes, (x) wileys halliday/resnick/walker physics, (y) topic wise solve paper by disha, (z) objective mathemetics by jee by rd sharma., civil engineering(a) design of reinforced concrete structure by s. ramamruthan, (b) design of steel structures(limit state) by s.k.duggal, (c) soil mechanics and foundation by dr. bc punmia, (d) strength of material by rs khurmi, (e) estimation, valuation and costing by m. chakraborty., (f) environmental engineeering i (water supply engineering) by dr. bc punmia, (g) environmental engineeering ii (waste water supply engineering) by dr. bc punmia, (h) transportation engineering by cl koechhar, electrical e