Latest channel cross arm Tenders | Government channel cross arm Tenders

State Government

CTN :40524375

06 Jun, 2025 80.49 Lacs

Multi City - Karnataka

Tender For manufacturing, inspection/testing and supply of 11 kv, horizontal cross arm - gi to cesc

CTN :40540617

20 Jun, 2025 NA

Dehradune - Uttarakhand

Tender For supply of assy fuel filter , assy oil filter , field coil assy , bearing bush , terminal main , arm assy kick starter , brake shoe assy , ignition switch rubber , cross pin , passenger fan , assy wiper blade , gasket , ignition cum steering lock , starter kit , booster assy , selector fork , water separator 2 pin , coil assy ignition

CTN :40252519

31 May, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras purchase of spares - std self lock nut m10 , o ring , screw(r2) , gasket( plate no- c1-16-1 , sl no-3) , o ring 15.2idx5.30 cross dia , bypass seal (ispl sl no -1206) , gasket for exhaust manifold(plate-4h1176) , bush (item no-309) , bolt m10x80(plate-iii g-3) , hose clip(ms sl-193) , back nut , reflector reflex white(plate iv r-13) , spring extension (plate xxv a) , dowty seal , bolt(ispl sl-502) , buffer , mounting rear road light l s(plate viii h) , bolt m10x50 (plate xxxi p) , mounting rear road light r s(plate viii h) , lock washer (plate xxxi r) , spacer(item no-562) , bolt , strap , lock cover door lh (plate iv n) , relay charge over , cable inner(plate xi-b3) , dump switch(plate-x h-2) , radiator top hose(plate-xxviii b-14) , half clamp(ispl plate-d04) , hinge door (item no-305) , working light switch front , joint , tail lamp right side(item no-907) , glass right side quarter light(sl-378) , glass left side quarter light , seal window left hand side (plate iv p) , ignition switch , pipe fuel , door seal left hand (item no-323) , door tinted glass lower , door tinted glass lower(sl no-322) , hose (plate-xiii n-1) , mounting resilient (item no-114) , hose st pump (item no-1212) , latch assy inner rh(item no-341) , glass tinted right (plate-iv r) , door tinned glass upper(item no-321) , door tinned glass upper(item no- 338) , window tinted glass left hand side(super plate pla , hose 5 by 8 feet bsp (plate-xiii t) , rear window tinted glass (jcb super page-107) , canvas cover(ispl sl-561) , window frame left hand slide (item no-354) , door painted & sealed left hand(item no-320) , link tipping (item no-747) , windscreen front (jcb 3dx super) , liner roof assy (plate iv f) , oil pan assy twin skin (p-801) , valve main relief 227 bar (plate-xv-b) , door right side(item no-337) , valve 3rd section (plate-xv-b) , valve 1st section (plate-xv-b) , operator seat(p-109) , valve inlet (plate-xv-b) , cooler trans hydraulic oil (plate-xxviii b) , bucket 400mm (plate xxxi e) , evb super manual hydro control(11 items) , cylinder dipper (sl no-404) , bucket excavator 0.26 (plate ii-1) , plug(plate-xxxi aa-27) , cap(plate-xxxi aa-28) , valve c w adapter(plate-xxxi aa-24) , coupling(plate-xxxi aa-26) , frame outer rear window(jcb super p-105) , nut gr 1.3 by 4 inch unf (price list) , oil filter transmission(ispl sl-1504) , transfer filter , super filter drain , internal puller , ring scaling (jcb ms sl no 580) , grab sleeve , grab sleev , grab sleeve , grab sleeve , grille front(plate-iii q-1) , thrurst ring , back up tool , assembly jig , belt wrench , lift arm(plate- v a-7) , bucket tapered(plate-xxxi v-1) , washer large , bulb instrument , washer (jcb super plate xxxix c) , clip , nut(b4-4-1) , nut lock 3 by 8 unf (plate i) , screw hex 3 by 8 inch (plate-xxib) , fuse 3 amp(jcb super ix e-10) , strap check (plate iv n) , screw hex head , bolt(a1-7-4) , nut (plate xx e) , whasier 13.2 by 13.0id x 41.2 by 41.0od x 2.9 thk , 7.5 amp fuse (plate ix e) , bolt 3 by 8 unf x 3 (jcb super page xxxix sl no-245) , bolt gr-5 , 1 by 2 inch unf x 3 by 4 inch long , nut , sterring nut , set screw m10x30(plate iv v) , banjo bolt with strainer , clamp , back nut(e1-8-11 by 3) , washer hardened m10 (plate iv v) , plate clamp(e1-4-1 by 5) , nipple , bolt m10x70(plate xiii r) , bolt m 12x100mm , o-ring , clamp mid (plate xxxi g) , link 1.25 ton (plate xxxi y) , clamp , lock cover lh , shim , cap , pedal pad , nut 1-1 by 2 inch unf x 27.5 thk , knob with switch (plate xg) , o ring , switch pannel hazared , screw driver 150mm , mounting cab lower red b-post(plate-iv) , socket 3 by 4 inch a oblique f(plate-vii d-30) , micro relay change over 12v , fuel pipe (feed pump to filter) , fuel tank cap (plate iii c) , stud pre cleaner (plate-xxvi b) , joint , liner to head , 0.8mm thk , lock nut , washer , adopter 90 deg elbow (plate-xiii y-3) , stainer fuel filter (plate iii c) , mounting cab upper green b-post(plate-iv-b) , pivot pin , fuel pipe , s

CTN :40397835

10 Jun, 2025 NA

Srinagar - Jammu And Kashmir

Tender For corrigendum : diagnostic and therapeutic items for cardiac cath lab (group b) - ecgelectrodesofhighqualitymaterialtominimize interference and signal distortion during prolonged cardiology procedurest (fda/ce approved), manifoldwithtwosideportsforptca(fda/ce approved), manifoldwiththreesideportsforptca(fda/ce approved), tefloncoatedguidewires(j-tip&straight-tip)standard length-145 or 150cm (fda/ce approved), tefloncoatedguidewires(j-tips&straight-tip)exchange length-260 or 300cm (fda/ce approved), femoral introducer sheath with puncture needle for adults (sizes 5 - 11 fr.) standard length; 10-16-25 cm long; 0.021 or 0.025-inch guide wire compatible. material of sheath tubing should be made of etfe, cross cut valve should be made up of silicon rubber & should have silicone coating. dilator tube should be made up of polypropylene and should have silicon coating. must have with haemostatic crosscut valve; with integrated side arm with attached 3-way stopcock; with suture eye for securing sheath and click sound; kink resistant. must have with dilator-hub lock mechanism to prevent its back-out during insertion; pack must include with or without metallic needle usfda approved, longintroducersheath(20-50cmlong)(fda/ce approved), extra-longintroducersheath(>50cm)(fda/ceapproved), radial introducer kit with puncture needle for adults (sizes 5 - 7 fr.) standard length 7 cm long; 0.035 or 0.038-inch guide wire compatible, include surflash 20g*2 entry needle (plastic iv catheter) and 0.025 mini plastic guidewire must have etfe sheath tubing, dilator tube should be made up of polypropylene and should have silicon coating.should contain a haemostatic crosscut valve to prevent back leak of blood and aspiration of air; with integrated side arm with attached 3-way stopcock, transradialcoronarydiagnosticcatheter (us fda approved) of various lengths, syringeforpressureinjector-150mlwithpressuretubing compatiblewiththeavailablesysteminthecathlab(medred-mark-7)arterion, highpressureconnectingtubingupto50cmslong for pressuresyringe, a). coronarydiagnosticangiographycatheter(judkinstype- leftandright)(us fda, b). coronary diagnostic angiography catheters ( judkins type) europeanceapproved), a). diagnosticcoronaryangiographycatheter(amplatztype- leftandright)(us fda), b). diagnostic coronary angiographic catheter ( amplaz type left &righceapproved), pigtailcatheters(fda/ceapproved), shortpigtailforpericardiocentesis, diagnosticmultipurposecatheters(fda/ceapproved), nihcatheter(fda/ceapproved), imacatheter(fda/ceapproved), ptcainflationdevice-analogdisplay(ballooninflation, deviceanalogdisplay,30atmpressurewithtubingand3, waystopcock)(fda/ceapproved), y-connectorsetwithextensiontubingtuohyburst,pci, needleand3-way, specialy-connectorsetwithbothfixedandhaemostatic, valvewithupto10frinnerdiameter, pcineedlewith/withouttorquerdevice, disposableplasticsterileluerlocksyringerfor angiographyandptca(leurlock), largelumenptcaguidingcathetersof5to8fr sizes-fda approved, largelumenptcaguidingcathetersof5to8fr sizes-ce approved, brkneedle(fda/ceapproved)for paediatrics/adults, embolicprotection(distalprotection)device(epd)for ptca (fda approved), embolicprotection(distalprotection)device(epd)for ptca (ce approved), manualthrombosuctioncatheterforptca(fda approved), manualthrombosuctioncatheterforptca(ceapproved), radialarterycompressiondevice, crossoverarterialsheaths(fdaapproved), snareloop(fdaapproved), snareloop(ce approved), micrograbber(fda approved), micrograbber(ceapproved), intravascularretrieversnareofvarioussizeswithsingle foldable loop, intravascularretrieversnare-twoloops(gooseneck type), intravascularretrieversnare-threeormoreloops (gooseneck type), pericardiocentesiskit(fda/ceapproved), pigtailcatheterwithmultiplemarkers(fdaapproved), rotalinkplussystem, rotalinkprosystem, rotalinkguidewire, intracoronarypressurewire(ffr)forptca-compatible with abbott vascular, ivuscatheterforcoronaryinterventionscompatiblewith boston scientific vasc

CTN :40524402

06 Jun, 2025 38.94 Lacs

Koppal - Karnataka

Tender For supply of sports equipements for dyes departmnent of koppal - outdoor gym horse riding michine, shotput 6kgturned iron made of standard athletics, shot put 5kg turned iron made of standard athletics, shot put 4kg coste iron made of standard athletics, shotput 3.63kg turned iron made of standard athletics, shotput 3kg, hammer throw(7.25kg) turned iron made of standard athletics, hammer throw (6kg) turned iron made of standard athletics, skipping rope made of fiber foam handles and fiber rope with spring with counting & timer, pole vault cross bar as per the standard, hand air pumpsas per the standard, balls containers steel case with trolly, ball bagsmicro material bag, antenna(fibre glass)steel with fibre glass, hammer throw (5kg) turned iron made of standard athletics, hand inflatorshand air pump with gape, leg inflatorsair pump with page, shot carriers steel case with trolly, starting clapper made of wooden steel with rubber coated handle, long jump spring this is made of heavy duty steel frame & 9 springs. powder coated inc durability & covered with suede fabric, discuss 2kgmade of wodden with steel rim, discuss 1.75kg made of wodden with steel rim, discuss 1.5kgmade of wodden with steel rim, discuss 1kgmade of wodden with steel rim, shot put 7.26kg turned iron made of standard athletics, hammer throw (4kg)turned iron made of standard athletics, swimming tubesitem weight-2000grams(2kg), 12l-12w centimeters, swimming lerning kit item weight710 grams. multicolour and 25l-8w centimeters, swimming life guard dimension 20-15cm 40 to 140 kilograms, swimming beginners learning padsitem weight 200grams and dimensions 26-20-20cm200g, volleyball moveable pole 4dia movable pole set with crank system for height adjustment, cricket set wooden bat with handle and grip, english willow or higher quality wood, cane handles with rubber grip, width of standard bat blade and weight of the 1000 ti 1100 gms etc., stopwatches(100 laps)high precision timing, waterproof design, ergonomic design,, chess mats with pawns all the squares are equal in size with fiber woodan pons, footbal hand stiched 32 pannel for high quality synthetic water proof suitable for all weather condition,, throw ball netmaterial nylon hdpe 4 side tape., throw ballmateral rubber weight0.41 kilogrms rubberized hand stitched 18 pannel, football netsyntheticwire, 7.32mtr, shuttle cocks(6pic)nylon shuttle cocks nylon shuttle - green (slow, 75, pack of 6), badminton rackets sizeweight, isometric shape, beam, shotput toe board syntheticmade of casted aluminium/wodden weather resistant, high jump standitem weight8kg, dimensions, thletic starting lane boxlength centimeters and weight5kg 250g, dimensionscentimeters, athletic measurement tape (100mts)flexiable tool used for measuring made of syntheic tape, marathon, athletic measurement tape (50mts)flexiable tool used for measuring made of syntheic tape, athletic measurement tape (30mtr)flexiable tool used for measuring made of syntheic tape,, athletic relay batons (metal) made of synthetic aluminium pipe, turn from both side, anodize in 8 different colours., basketball top grip circumference 67-70cm, bladder buty, pu rubber, water proof, nitroflate molecular nivia/equivalent, wrestling mat with cover wrestling mat made of pure eva, with nylon cover of non slippery, non tearing & non painted colour, football carry bags made of micro metrical, tennokoit ringmade of rubber, out door gym air swing dimensions-1100-900-1250, out door gym leg thigh machine dimensions-1350-1700-1250mm. thikness of pipe2.5mm to 7.5mm, out door gym shoulder wheel dimensions-1100-900-1250mm., out door gym arm wheel dimesions-2044-500-1500mm, out door gym double chest press dimensions-850-800-1800mm, out door gym cycling machine dimensions-1450-1350-700mm., out door gym tripal stading twister dimensions-2100-902-1700mm., out door gym parllel bar dimensions1100-500-1450., dubble air walker dimensions-1150-600-1500mm., out door gym air walker dimens

Central Government/Public Sector

CTN :40506973

19 Jun, 2025 NA

Midnapore - West Bengal

Tender For supply and delivery of dlw loco spares to hdc - socket hd. cap screw 10 x 30 lg. , socket hd. cap screw 12 x 70 lg. , socket hd. cap screw 12 x 90 lg. , lock wire 14 swg x 1250 mm. lg. , sanding arrgt. , m.n.s pin , keeper pin , split cotter pin , socket hd. cap screw 3/4 inch-10 x3-1/4 inch long. , nut 3/4 inch , lock washer 3/4 inch , copper washer ( benzo bolt) , seat, drivers , looking glass , weather strip 2.25 mm. , arm rest , hinge 3 inch x 3 inch , hex. nut , lock washer 1/2 inch dia. , hydraulic damper lateral , hydraulic damper vertical , lever fulcrum pin , bolt 1/2 inch- 13 hex , spring lock washer 1/2 inch , sa-9 brake valve , modified a-9 auto brake valve , nut 3/4 inch , victalic coupling 3 inch flrxiblr pipe coupling , gasket coupning , coupling 3 inch dressor , coupling 1 inch dreassor , elbow 1 inch, dressor , hex. hd. bolt-3/8 inch-16x1 inch , hex.nut-3/8 inch-16 , hose assly. , adopter 3/4 inch-14x1-1/16 inch-14 , dressor coupling 3/4 inchx90 degree , dressor coupling 3/4 inchx90 degree , pipe plug 1/2 inch sq. hd. , fuel pump support with cross head and lifters , fuel pump cross head , fuel pump cross head lifter , adjusting screw , f.p cross head cam roller , cam roller , retaining ring for cam roller pin , cam roller pin (air & exhust) , cam roller bushing , cam roller pin , o ring tube to cylinder head , air strainer 1/2 inch , h/l rotary switch , g.f . c.o switch , m.u switch , led cab light , indication panel , needle bearing , plate type lube oil cooler (dlw drg. no. tpl-8515) , equaliser pin , head lamp switch (hlps) , switch toggle , carbon brush for t/ motor tm907bz , contactor complete m50ec2 , contact assy. (power contactor) , lws electronic , safety valve j-1 set at 10.5 kg/cm2 , c2 relay valve , c2 w relay valve , cut out cock,ball type 1/2 inch without vent , cut out cock,ball type 3/4 inch without vent , cut out cock,ball type 1 inch without vent , water level gauge. , 3 phase ac fuel pump motor , 3 phase ac cc motor , equalizer, with bushing & wear plate , equalizer pin , clevis pin , oil stainer assembly , end cover (plain) , end cover ( hasler speedo) , inlet valve plug , brake cylinder complete with push rod(l.h) , brake cylinder complete with push rod(r.h) , brake shoe key , doule sliding window , inlet valve ring , air dryer , m.r. auto drain valve (gm type) , 6 inch single air gauge (b.p) , 4 inch duplex air gauge (m.r & f.p) , 4 inch single air gauge ( b.c) , loco brake release switch , control air gauge , oil pressure indicator assly.with indicating plate , breather assly. , cylinder l.p /exhauster , cylinder h.p. , hose flexible,fuel cross over gen. end , air flow measuring gauge , push button , 1 1/4 inch check valve , gf contractor , engine control switch (ecs) , fuel gauge assm.

corporations/Associations/Others

CTN :40512346

09 Jun, 2025 3.11 Lacs

Erode - Tamil Nadu

Tender For supply of 1500nos. lt single phase channel cross arm

corporations/Associations/Others

CTN :40494712

11 Jun, 2025 7.90 Lacs

Cuddalore - Tamil Nadu

Tender For supply of tapping channel cross arm for operation and maintenance works in cuddalore edc

corporations/Associations/Others

CTN :40483327

09 Jun, 2025 14.00 Lacs

Coimbatore - Tamil Nadu

Tender For supply of lt three phase channel cross arm -2500 nos

State Government

CTN :40474645

29 May, 2025 NA

Thiruvananthapuram - Kerala

Tender For target for the year 2025-26-1st phase- fabrication of 2line & 4 line cross arm, 1.8m,2.4 m and 3m channel cross arm in production shop, c. m. division, pallom.

Channel Cross Arm Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government