Latest channel sleeper scrap Tenders | Government channel sleeper scrap Tenders

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

Central Government And Public Sector

CTN :38934831

19 Apr, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of - motor point machine for railway yard trs- motor point machine for railway yard trs description of materials and execution for installation, wiring & testing to operate the point machine at nalco rly yard as per eco.railway sepcfification. 1. supply of electric point operating machine 143mm non trailable to operate on 110v dc complete with lock detector, point junction box along with telescopic pipe and slides for lock and detector- rotary locking. universal type as per specification no: irs/s/24/2002 with latest amendment and drg. no.: rdso/s: 10800 (foc motor) along with standard tool kit set for every 4 point machines. (1no.) 2. supply of ground connection set complete suitable for rotary locking type irs electric point machine as per drg. no. s-3262 for 60kg rail with insulating materials with insulation materials. (1 set) 3. supply of junction boxes with covers and terminal plates 24/30 way to suit drg. no. 236967/1 (as amended up to date) and irs: s-10/78. this includes supply of pbt terminal. (1 nso.) 4. transportation, installation of point machine on ms plate fixed on wooden/psc/steel sleeper complete with fixing of anti-theft arrangement, "d" bracket, junction boxes, connection including smithy works involved for ground connection, including riveting/welding of angle cleats, termination of cables. preliminary adjustment for operation of points by crank handle oiling, greasing, painting and lettering as required. this also includes supply and fixing telescopic arrangement using gi pipes of required dia for provision of wires from junction box to point machine.(1 no.) 5. wiring and testing of electric point machine as per the wiring diagram supplied by the railway. this also includes the connection of electric point machine and fixing of insulation materials and providing two numbers of seven lever ( 7 lever) goderj locks with three keys each, per machine for outside cover, fixing arrangement of crank handle interlocking in point machine, and fixing of e type lock ( if required).(1nos.) 6. supply of steel apparatus case large size as per drg. no.- con/sk/1/186/ and spec no irs:s-10/78 (adv) with latest amend. with "e" type lock & key of ward no.-32 with handle. (1 nos.) 7. transportation, excavation of pit, casting of foundation, plastering and erection of steel apparatus case (full) with fixing of e-type lock, wiring, cable entry, termination, clamping filling cable pit with sand, painting and lettering etc., as per drg no. s & t/con/sk/16. this included earth work and/or masonry work required for securing the apparatus case as per site condition including supply of all required materials wire coils 6 way terminal pbt hylam sheet, wooden plank etc. (1 no.) 8. pvc insulated amoured, unscreened, underground railway signaling cable as per specification no. irs:s63/2014(rev.4.0) 12/core (250 mtrs) 9. excavation of trenches of depth 1.0m including clearing of roots and trees etc. for all types of soil. this work also including covering of cables laid in trench and backfilling, ranning and consolidation of soil as well as disposal of extra soil after cable is laid as specified in guidelines on signaling cable laying given by rdso and any latest circular.(100 mrtrs) 10. track crossing by horizontal boring method as per technical specification of manual as per feasibility of site condition including supply of dwc pipe or hdpe pipes. (18 mrts) 11. laying of signaling cable/power cable to extend the power of all sizes in excavated trench, etc. (0.5 km) 12. supply, transportation, installation, testing and commissioning of earth electrode, construction of cement enclosure to drg. no. con/sk/t/9a and drawl of 6 swg wire or 2 nos. of 8 swg wires from each electrode to place advised by the site engineer including fixing and soldering of lugs and measuring, painting of the earth resistance etc. (1 nos.) 13. supply of smr ower panel (minl ips) having smr module03 nos., dca card01, dc-dc convertor

Central Government/Public Sector

CTN :39967610

02 May, 2025 NA

Darbhanga - Bihar

Tender For dismantling of pcc apron excavation of earth work, dismantling 52 kg of track, linking of 60 kg/52 kg track leading of 60 kg rail and sleeper to make line no. 4 as ballasted track at darbhanga yard.

Central Government/Public Sector

CTN :39967016

13 May, 2025 NA

Jaipur - Rajasthan

Tender For running contract for manufacture and supply of combination high viscous nylon-66 in sulating liner (hvn liner) to rdso drg. no. t-8752/8753 alt.03 for 52kg. rail or latest with reference date as tender closing date, for use with psc sleeper to drg no. rdso/rt-8746 as per specification n o. t-44-2023 rev.2 or latest with reference date as tender closing date. [ warranty period: 30 mon ths after the date of delivery ]

Central Government And Public Sector

CTN :39911698

24 Apr, 2025 NA

Katihar - Bihar

Tender For supply of insulated rail dolly for carting rail & sleeper and at welding rail

corporations/Associations/Others

CTN :39908916

18 Apr, 2025 NA

Kolkata - West Bengal

Tender For auction sale of old/scrap rail,scrap iron materials,rubber mat,old metal drum (205 ltr),old wooden sleeper,scrap gas pipe (rubber),stone sets (250x125x100) mm,wind shield (four wheelers),plastic bucket (5ltr)

Central Government/Public Sector

CTN :39904502

25 Apr, 2025 NA

Valsad - Gujarat

Tender For supply of insulated rail dolly with attachment for carring concrete sleeper and rails. no. tm/sm/24

Central Government/Public Sector

CTN :39915562

30 Apr, 2025 NA

Pune - Maharashtra

Tender For .manufcturing and supply of complete set of inspection gauges as per rdso drg, no t-6215( part)for10125mm over ridingfan shaped curved switch b.g for 60 kg(uic)/60el on psc sleeper to rdso dr g no. rt-4219 .one set consist of( i)y at point ?r? (ats) gauge no.1(ii)under cutting of tongue rail foot at (ats)- gauge no.2(iii)13mm head thickness (at 1682mm fromats) -gauge no.3(iv)12r toe radius at (at s)- gauge no 6(v)tongue rail head thikness (at 4244mm from ats) -gauge no.35 [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :39859892

22 Apr, 2025 NA

Guntakal - Andhra Pradesh

Tender For sw-i : guntakal division : den/north jurisdiction : gy-wd , klu-gtl & bay-gtl section (up/dn):- proposed safety related track maintenance works including station yard lines in sse/p.way/bg/gtl, central/gtl, bay sections of aden/north sub-divisions.sw-ii : gtl-wadi (up): trr(p) through rail renewal (primary) of exg. 60kg/90uts rail with new 60kg/r260 rail on psc6 sleeper for a length of 1.000km (up 456 to 457 km).

Central Government / Public Sector

CTN :39859909

22 Apr, 2025 NA

Guntakal - Andhra Pradesh

Tender For sw-i : guntakal division : den/north jurisdiction : gy-wd section (up/dn):- proposed safety related track maintenance works including station yard lines in sse/p.way/ad, malm sections of aden/ad sub-divisions.sw-ii : gtl-wadi (up): trr(p) through rail renewal (primary) of exg. 60kg/90uts rail with new 60kg/r260 rail on psc6 sleeper for a length of 1.64km (up 477.360 to 479.000 km).sw-iii : gtl-wadi (up): trr(p) through rail renewal (primary) of exg. 60kg/90uts rail with new 60kg/r260 rail on psc6 sleeper for a length of 1.50km (up 479.000 to 480.500 km).sw-iv : gtl-wadi (up): trr(p) through rail renewal (primary) of exg. 60kg/90uts rail with new 60kg/r260 rail on psc6 sleeper for a length of 0.77km (up 480.500 to 481.270 km).sw-v : gtl-wadi (up): trr(p) through rail renewal (primary) of exg. 60kg/90uts rail with new 60kg/r260 rail on psc6 sleeper for a length of 0.145km (up 538.260 to 538.405).

Channel Sleeper Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors