Latest check rails Tenders | Government check rails Tenders

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0

CTN :39986455

01 May, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of m2 bof 6164802 2 bush for platform travelling , m2 bof 6112458 bush serrated axle front rear plat , m2 bof 6117888 bush for hydraulic system , m2 bof 3017879 drum brake for adjuster assembly , m2 bof 6109674 seating body , m2 bof 6125372 chain for plug blanking double , m2 bof 6101515 washer bevel pinion bearing jack leve , m2 ian 89sa pipe oil tank cylinder , m2 bof 6112469 bearing axle front plat m travelling , m2 ian 124sa hawser assembly , m2 ian 251sa pipe pressure gauge brake cylinder , m2 bof 6154286 2 shaft main for resetter coarse fine , m2 bof 6146088 plunger loading out trigger outrigger , m2 bof 6045100 screw adjustable for wheel pneumatic , m2 bof brb 21x40 washer plain bright brb 21x40 , m2 ian 99sa pipe oil tank cylinder , m2 bof 4021089 pivot top for outrigger left and right , m2 bof 5051417 plunger suspension spring axle front , m2 bof ec6s 8x19 screw hex socketed ec6s 8x19 , m2 ian 295sa casing return spring right hand brake , m2 bof 6104471 spring trip lever , m2 bof 6116578 plate spring , m2 bof 6125117 bracket pipe for hydraulic stystem , m2 bof 6146424 lever cartridge aperture cover for loader automatic , m2 ian 62sa deflector cartridge for loader automatic , m2 bof 6097127 roller cocking lever for loader automatic , m2 bof 6132656 valve for valve drain , m2 bof 6110087 grip for hopper automatic bid number/ & ( * ) : gem/2025/b/6130073 dated/ + : 10-04-2025 bid document/ 3 3 1 / 24

CTN :39988396

21 Apr, 2025 25.00 Lacs

Pali - Rajasthan

Tender For supply of spare parts for jcb and operation maintenance of jcb at mcp - cylinder liner , over haul gas kit , valve inlet exhaust , crank shaft , main bearing set , trust washer , piston , piston ring set , connecting rod , con rod bearing set , cam shaft bush , rocker arm , rocer arm shaft , gear cam shaft , water pump assy. , oil pump assy. , oil filter , belt , engine mount pad , exhaust elbow , engine throttle cable , engine stop cable , turbo charger assy. , silencer exhaust abi , flang exhaust , element main , element secondary , auto tensioner , idler gear , engine fan , fuel filter assy. , filter kit , engine connecting rod , fan drive puley , hyd. strainer , suction strainer , fuel injection pump , injector pipe , rubber hose , fuel filter assy. , nozzle , return line , fuel module with sensor , fuel tank cap , radiator , radiator assy. , coolent , hose top , hose cac (cold side) , hose cac (hot side) , front wheel and axle , axle service , center pin , axle stub , hub , hub seal , seal cone , bearing inner , bearing outer , axle carrior l/h , axle carrior r/h , track rod , brake fri. plate , brake cou. plate , brake seal , brake oil 500ml , differential , differential gear planet , gear planet , bearing roller double , seal cassetle , bearing teper , tripling seal , stud wheel , carrier , gear innulus ring , hub palentry , drive shaft , bearing roller , bearing teper roller , yoke , cross patti & bolt , cross holder , uj cross , bearing , brake , master brake cylinder , pipe brake l/h , pipe brake r/h , brake reserve , steering , coupling , bearing , rim steering wheel , self starter , self starter , solenoid , switch altinator , altinator puley , wheel belt 1232 , rocker plate , field set , armature bush set , bearing assy. , carbon set , bendex , armature , wiring and electrical , wiring harness complete , bettery cable , hour meter , head light bulb , tail light bulb , fuse and reley 15 amp , tail lamp , head light assy. , ignition switch , wiper blade assy. , harness roof , combination switch , fog lamp , body , side mirror , seat , wiper motor assy. , wiper blade , catch window , latch l/h , wind screen front , glass outer l/h , glass outer r/h , rear window glass , by soccker , door hinge , lock set inner , lock set outer , door got set , by belt , transmission , transmission over , charging pump assy. , counter plate , firction plate , transmission filter , bearing , bearing , torque converter , bearing , converter , drive plate kit , mounting , yoke coupling , lever assy. gea turret , selonoid valve assy. , strainer , transmission filter , stabliser , steblizer piston , steblizer rod , inner leg steblizer , steblizer foot , pin pivot , adjuster , atb rear pad kit lower , atb rear pad kit upper , hydraulic , ind. steering suct , selonoid coil , hyd. filter assy. , hyd. filter element , mrv , hyd. pump , repair kit , priority valve , ram seal , pump seal kit , pump steering , ramp bucket , ram , bucket lift cylinder ram , bucket tilt cylinder ram , boom ram , loader ram , loader jaw ram , dipper ram , slew cylinder ram , stablizer ram , steering cylinder ram , 6 in 1 ram , , hose , hose-10-bsp 560mm , , hose-08-bsp 1860mm , , hose-10-bsp 2750mm , , hose-04-10bsp 1825mm , , hose-08-bsp 2620mm , , hose-10-bsp 2520mm , , hose-08-bsp 2860mm , , hose-08-bsp 2650mm , , hose-12-bsp 3900mm , , pin and bush , bucket pin , , pin , , pin , , tipping liver , , pin dipper , , bush , , bush , , pin , , boom main pin , , pin , , pin top , , pin pivot , , pin pivot , , pin boom ram , , pin pivot , , pin pivot , , pin pivot , , kpc kit and bush , , bucket kit , , seal kit , bucket seal kit , , dipper seal kit , , boom seal kit , , seal slew kit , , stb , , steering seal kit , , loader seal kit , , lift seal kit , , bucket seal kit , , rubber seal kit , , boom seal kit , , etc out , , slew seal kit , , loader seal kit , , steering seal kit , loader and bucket welding , loader hard facing, bucket hard facing, loader toe plate

CTN :40003384

27 May, 2025 NA

Multi City - Multi State

Tender For supply of modified centre pivot top

CTN :40003932

05 May, 2025 NA

Multi City - Multi State

Tender For manufacturing & supply of 11200 mm curved thick web switches 1 in 16 , 60 kg zu-1-60/60e1a1 thich web grade 880 class a tongue rails and uic 60 kg /r260 grade- 880 class a/b stock rails with elastic fastenings and spring operated setting device rdso t-6216 on psc sleepers to rdso drg no. t-7076 (alt.3) with latest alteration if any up to the date of tender notice, with suppliers rails, complete set with all parts as listed in the drawing including check rails, cgrsp, but excluding the gfn liners, erc, plate screws, fish plates and fish bolts & nuts, conforming to irs -t-10-2023 specification with latest alteration as amended up to the date of tender notice.

Central Government And Public Sector

CTN :39945697

30 Apr, 2025 NA

Bilaspur - Chhattisgarh

Tender For execution of p.way works like trr(p), tsr(p), tbr, ttr (by tws & ors), renewal of sejs, glued joints, dowels & broken screw spikes, renewal of turnout sleepers, deep screening of points & crossings, casual renewal of p&c sleepers, sej sleepers, dowels of p&c sleepers, reconditioning of inserts, replacement of broken screws, chair plates, fabrication of check rails, greasing of fishplates, opening of jammed ercs, grinding of rails, standardization of sand humps, dead ends & trolley refuges and other associated track works under the jurisdiction of senior section engineer/p.way(in-charge)/champa of bilaspur division.

Central Government And Public Sector

CTN :39945699

30 Apr, 2025 NA

Bilaspur - Chhattisgarh

Tender For execution of p.way works like trr(p), tsr(p), tbr, ttr (by tws & ors), renewal of sejs & glued joints, renewal of turnout sleepers, deep screening of points & crossings to avoid mud pumping by t-28/bcm, deep screening of coal choked yard lines and mid-section lengths to avoid mud pumping, casual renewal of broken sleepers, p&c sleepers, sej sleepers, dowels of p&c sleepers, reconditioning of inserts, replacement of broken screws, chair plates, fabrication of check rails, greasing of fishplates, opening of jammed ercs, grinding of rails, standardization of sand humps, dead ends & trolley refuges and other associated track works under the jurisdiction of senior section engineer/p.way(in-charge)/raigarh of bilaspur division.

Central Government And Public Sector

CTN :39965575

30 Apr, 2025 NA

Bilaspur - Chhattisgarh

Tender For execution of p.way works like trr(p), tsr(p), tbr, ttr (by tws & ors), renewal of sejs, glued joints, dowel & broken screw spikes, renewal of turnout sleepers, deep screening of points & crossings, deep screening of coal choked yard lines and mid-section lengths to avoid mud pumping, casual renewal of p&c sleepers, sej sleepers, dowels of p&c sleepers, reconditioning of inserts, replacement of broken screws, chair plates, fabrication of check rails, greasing of fishplates, opening of jammed ercs, grinding of rails, standardization of sand humps, dead ends & trolley refuges and other associated track works under the jurisdiction of assistant divisional engineer/brajrajnagar of bilaspur division.

Central Government/Public Sector

CTN :39950667

06 May, 2025 NA

Bikaner - Rajasthan

Tender For supply of center pivot top for blc wagon.

Central Government / Public Sector

CTN :39950726

13 May, 2025 NA

Multi City - Multi State

Tender For supply of bogie centre pivot top (flat type ) for casnub 22 hs bogies conforming to rdso spec. no. wd17-casnub -22 hs bogie -92 rev.4 of sep-2024 to rdso drg no : wd-97049-s-03, item - 2, lt : 10.

Check Rails Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government / Public Sector