Latest checkered plate Tenders | Government checkered plate Tenders

State Government

CTN :40435240

29 May, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan

CTN :40303641

27 May, 2025 NA

Kalagarh - Uttarakhand

Tender For work of checkered plate replacement on super structure of parallel hindon cut canal regulator new delhi.

Central Government/Public Sector

CTN :40434801

30 May, 2025 NA

Kota - Rajasthan

Tender For wheel/tyre defect gauge for bg coaches as per railway boards approved irca part iv, rule 2.8.4 and plate 38, made of 3 mm thick hard alloy steel plate, used for inspection of condemn flange thick ness, root radius, sharp flange, deep flange, flatness of tread etc. of wheel profile. condemning flange thickness of 22 mm & flat face of 50 mm gauges are to be supplied in separate carrying case and workin g manual. the gauges shall be supplied with certification from nabl/nabl accredited or govt. approved la bs. first calibration valid for period two year ( warranty period : up to 30 months from the date of supply) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40419551

11 Jun, 2025 NA

Ahmedabad - Gujarat

Tender For digital weighing scale capacity 500 kgs, accuracy 50 gram, checker plate top size 600 mm x 600 mm approx., red bright led display up to 5 digit, 6v, 4ah, rechargeable smf battery operated and single phase 90 volt to 250 volt, 50 hz electric operated , structure made from 50mm square heavy pi pe, supply with calibration certificate from government approved agency. make -tula, tanita, stenling, adorin, ritco, phoenix or similar.(specification atta ched) [ warranty period: 36 months after the date of delivery ]

CTN :40420090

13 Jun, 2025 NA

Jamalpur - Bihar

Tender For supply of number plate calibration for 6200 litre fuel glow rod as per dlw pt. no. 17341930. [ warran ty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40078927

26 May, 2025 6.56 Lacs

Puruliya - West Bengal

Tender For corrigendum : custom bid for services - reconditioning of coal feeder outlet reducer portion (chute) for both units of rtps-1. transportation of damaged/worn-out feeder outlet reducer portion (chute) from rtps, dvc site to vendor workshop and repaired chute from vendor workshop to rtps, dvc site is in the scope of vendor. 2. loading/unloading of materials are in the scope of vendor except at rtps, dvc site. 3. a joint inspection will be done at rtps site for noting & area marking on chute (area to be repaired) before receiving of material. 4. measure the worn-out portion & cut it completely with the help of cutting tools or plasma cutter. 5. grinding and edge preparation is to be done as per requirement on plate before welding. 6. fit the new plate as per requirement and weld it in chute with proper welding electrode308l and grind finish is required after welding. 7. new plate & its bending in required shape is in the scope of vendor. 8. all consumable like welding electrode, cutting wheel, grinding wheel, etc. are in the scope of vendor. 9. plate material (plate thickness-12 mm, material- ss304, make will be only of three company sail, tata & jindal) is in the scope of vendor. 10. repairing/replacement of ms flange if required will be in vendor scope. 11. payment will be made on actual square meter repaired by vendor. 12. quantity of chute for repair is 12 nos it may vary (may be increase or decrease). 13. delivery period is 180 days after placement of wo. 14. part payment against part supply is acceptable. 15. the reconditioned chute has to be guaranteed for a period of 12 months from the date of supply & 06 months from date of commissioning whichever is earlier against bad workmanship. guarantee/warrantee certificate to be furnished at the time of completion of work. 16. party has to submit the 1:1 fitment cum interchangeability certificate of material. 17. the party has to submit the indemnity bond after placement of work order. 18. pre-dispatch inspection shall be carried out by m/s dvc at vendor s works and the vendor has to intimate 15 days in advance regarding readiness of the material. 19. dimensional verification & positive metal identification (pmi) test shall be carried out during pdi for ss 304 plates welded to chute and the vendor has to arrange machine with valid calibration certificate at their own cost. 20. all the old & damaged scrap cut during the course of work shall be returned to m/s dvc during delivery of chute at rtps.

Central Government/Public Sector

CTN :40385580

09 Jun, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of tyre defect gauge for bg coaching stock, as per railway board approved irca part 4, rule 2. 8.4 and plate 38. to check the various wheel defect like thin flange, sharp flange, deep flange, hollow tyre/ false flange, root radius and flat places on wheel. the gauge must be suitable for checking wheel flatness 50 mm rejection limit and thin flange 22 mm rejection limit. made of hard alloy steel/ stainless steel having thickness approximately 3 mm to 3.5 mm with permanent making of the type of rolling stock which can be checked. to be supplied with carrying case along with calibration certificate from government approved te st house.(accepted make/brand:prasad) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40317338

22 May, 2025 NA

Mumbai - Maharashtra

Tender For weighing machine digital weighing scale capacity 500 kgs, accuracy 50 gram, checker plate top size 600 mm x 600 mm approx., red bright led display, 6v, 4ah, rechargeable smf battery operated and single phase 90 volt to 250 volt, 50 hz electric operated, structure made from 50mm square heavy pipe, supply with calibration certificate from government approved agency. make tula, tanita, stenling, adorin, ritco, phoenix or similar.

CTN :40291891

23 May, 2025 NA

Izatnagar - Uttar Pradesh

Tender For supply of set of gauges for schaku coupler with calibration certificate (traceable to nabl certified lab) & traceability certificate as per list below- 1) profile gauge for upper & lower cup sleeve (2ed-181-1149(sc haku 40.586.06.01 (4) & 2ed-18101153(schaku(40.624.06-4(3),drg no.-se-g-121, qty-02 nos. 2) gauge for pin(31.8c11),drg. no.-se-g-120,qty-02 nos. 3) gauge for allen bolt/screw (2ed-181-1166),drg.no.-se -g-128, qty-02nos. 4) gauge for fork head 2ed-181-1204(schakudrgno.40-1000.10-6(3),drg. no.- se-g- 132, qty-02 nos.5) gauge for front plate sub assy.2ed-181-1156 (schaku drg.40.586.06.02 (4), drg.no.- se-g-122,qty-02 nos.6) profile gauge for adjustable cup sleeve/pair of cup sleeve 2ed-181-1074(schaku d rg.40.317.13-1 (3), drg. no.se-g-129, qty -02 nos. 7) gauge for bush upper & lower 2ed-181-1091(scha ku drg.40-524.07-3(4) &2ed -181 - 1089(schaku drg.40-524.-7-4(4), drg.no.-se-g-118, qty-02 nos. 8) limit gauge for yoke (sub.assy.)2ed-181-1183(schaku gr.40.586.06.04(2), drg. no.-se-g-124, qty -02 n os. 9) snap gauge for bolt 2ed-181-1181(schaku drg.40.586.06.3 (4), drg.no.se- g-126.qty-02nos. 10) snap gauge for bearing bolt 2ed-181-1093(schaku drg.40.586.07.03 (3), drg. no.se-g-119, qty-02 nos. 11) limit gauge for carrier(sub assy.)& leaf spring compl.subassy.2ed-181-1200 (schaku drg.40-524.07.0 3(4) & 2ed-181-1106(schaku drg.40.524.07.08 (20),drg.no.-se-g-117, qty-02 nos.12) limit gauge for r ear plate sub assembly 2ed-181-1157(schaku drg.40.586 .06.03 (4) drg.no.se-g-123, qty-02 nos. 13) gauge for articulation bearing 2ed-181-1151(schaku drg.40.sk.1960 (3) drg.no.s-g-127, qty -02 nos.1 4) go gauge for draft gear/draw &buff gear (sub assy.) drg.no.se-g-136, qty-02 nos. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40295624

02 Jun, 2025 NA

Danapur - Bihar

Tender For gauge for plunger face/ face plate 19 mm. wear limit ? 11 mm.required size - 1905 mm cur vature gauge with depth measurementref. drg. no. w/bd ? 355 & 359 and sk 94255 & sk 94256material - tool steel, is 3748/90 hardness ? 50/55 hrc.supply with calibration certificate ? valid for min. 01 year iss ued from nabl approved lab [ warranty period: 30 months after the date of delivery ]

Checkered Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector